SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> aftermarket handlebars /cgi-bin/YaBB.pl?num=1594428680 Message started by roddy on 07/10/20 at 17:51:20 |
Title: aftermarket handlebars Post by roddy on 07/10/20 at 17:51:20 hi everyone. i bought a handle bar that is a scrambler type of handlebar. if anyone out there has put these on, do i have to get different control cables? thanks for all of your info, roddy |
Title: Re: aftermarket handlebars Post by ohiomoto on 07/10/20 at 18:26:56 If they are 1" bars, then you are good to go. |
Title: Re: aftermarket handlebars Post by StripedSavage on 07/11/20 at 14:07:13 I have put lower bars then stock on mine, you will have some extra length of cable you need to find a place for but as long as there are no binds or sharp bends that will restrict the cable and break line you should be fine, not the same bars but ill post a pic of my bike. i currently have it taken apart so you'll have to deal with a general pic and zoom in I guess |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |