SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> The Marketplace >> Parting Out 2006 Suzuki s40
/cgi-bin/YaBB.pl?num=1593479677

Message started by BlakeEM on 06/29/20 at 18:14:37

Title: Parting Out 2006 Suzuki s40
Post by BlakeEM on 06/29/20 at 18:14:37

I'm parting out my wife's 2006 Suzuki s40. Everything must go. This was her daily ride for the last 5 years. We took very good care of it so most of the parts are in good shape besides normal wear and tear. The bike has just over 27k miles on it.

Here are some pictures.
https://drive.google.com/drive/folders/12G7qJQhnRdiBqK-3GZatt2woPeEGnvnu?usp=sharing

It has a wrapped header with a Harley Dyna FXD Muffler.
Carburetor is in great working condition, it has a Dynojet stage 1 jet kit.

It has suzuki seat rest and rack.

Tank is in good shape with no dents, just some small scrapes on the front that you can see in the pictures. It comes with a different petcock out of an ATV since the stock one was problematic and much more expensive to replace.

Engine side covers, valve cover, and top chrome engine covers are in good shape. The rest of the engine is questionable due to engine failure but I can look at specific parts if interested.

The bike is light blue however the side covers were a different greenish color from the later model.

I can post more detailed pictures if interested in anything specific. I'll take any fair offer if you pay the shipping. I'm located in San Diego if you want to do local pickup.

Thanks!
-Blake

Title: Re: Parting Out 2006 Suzuki s40
Post by srinath on 06/30/20 at 07:10:36

That is beautiful bike.
I'd like the whole front end handlebar, upper and lower triples with stem and fork legs. No need for wheel and tire.
The idea is to build a girder using a front end instead of the whole bike sitting at the shop LOL.
Lemme know how much shipped to 29063.
PS: I don't need the front fender either. Just legs, triples, handlebar and risers.

Cool.
Srinath.

Title: Re: Parting Out 2006 Suzuki s40
Post by garygrips on 06/30/20 at 19:22:33

how much for the header pipe and or the muffler?

Title: Re: Parting Out 2006 Suzuki s40
Post by LANCER on 07/01/20 at 11:24:53

Have you opened the engine yet ?
I'm interested in the head, cam, and possibly other engine parts.

Title: Re: Parting Out 2006 Suzuki s40
Post by BlakeEM on 07/01/20 at 16:47:04

I'll start disassembling this week and I'll get specific shipping prices once I get get the parts off and do a proper estimate. I'll contact people directly in the order I hear from them. I'll post pictures before agreeing on a price but here are some estimates.

@srinath I'd say $200 + shipping for the yoke/triple tree, forks, handlebars, and risers. The seals and everything looks in good shape.

@garygrips I'd say $100 + shipping for the header/muffler. The wrap was put on wet and coated in silicon spray to seal it from moisture. I made a shim using a coffee can since the muffler is slightly larger than the header pipe (this is a common swap for the bike).

@LANCER Engine is open and case split. I wouldn't want to sell anything in the lower end since the balancer damaged the crankshaft. Most other parts seem fine and it still had compression. The nut sheered off that holds the jug to the head so I'll need time to get around to separating them since the nut is so mangled right now. The head, valve cover, and valves all look in great shape. I'll have to check the piston because I'm not sure how it looks.

Title: Re: Parting Out 2006 Suzuki s40
Post by ShodanMike on 07/01/20 at 17:15:42

HI Blake.

I'm in need of a carb. What is your price? Deliver ups to Nor Cal

you can contact me easiest by email.

mharris@edcoe.org

Thanks
Mike

Title: Re: Parting Out 2006 Suzuki s40
Post by srinath on 07/02/20 at 05:34:53

5779747E705058150 wrote:

@srinath I'd say $200 + shipping for the yoke/triple tree, forks, handlebars, and risers. The seals and everything looks in good shape.

I'm going to skip on this because I have no idea when or what my project is going to take off.
Cool.
Srinath.

Title: Re: Parting Out 2006 Suzuki s40
Post by justin_o_guy2 on 07/02/20 at 08:56:32

Well, forks, fender, tank, and I'll Hafta look at the pegs again..

Title: Re: Parting Out 2006 Suzuki s40
Post by justin_o_guy2 on 07/02/20 at 09:13:28

The sidestand carrier doesnt look busted,, but there is a pocket in it, that the peg left vacant,, so, Im guessin all I need is the left peg to solve that issue,,

Forks, fender, tank, left peg, ahh,, the lights,, imagine that,, hittin that car busted up some lights,,
Broke all two of the left side lights,,
So, need those..

Title: Re: Parting Out 2006 Suzuki s40
Post by BlakeEM on 07/02/20 at 09:34:36

6F7076716C6B5A6A5A62707C37050 wrote:

I hope you are alright! I know what that is like when I had a car illegally pull right in front of me.

You just need the fork tubes/legs?
How about handlebars? I know they often bend as well.
I'd guess $120 for both forks.
Foot peg like $10.

Tank I think $200. I'll leave in the petcock, it's much better if you have the oem one otherwise you can have a backup. I just need to remove the gauges because I assume you don't need them.

I HATE the turn signals on this thing. I believe the front ones are fine but the rear lenses kept falling off some reason even after buying new ones. I'll need to have a better look at them to make sure they are not damaged or something and I'll get back to you. $20 for each signal and I'll just throw in the rear one if it is damaged since it may be fixable and in better shape than what you have.

I think that only the tank would need to be shipped separately so it doesn't get damaged and everything else can be shipped together.

I'm starting disassembly later today so I'll know more and post some pictures then.

Title: Re: Parting Out 2006 Suzuki s40
Post by justin_o_guy2 on 07/02/20 at 13:23:50

Im thinkin Im just gonna hafta do the bodywork as well as I can on the tank,, and live with some imperfections..
Lets see what the signals act like,, spittin lenses goin down the road isnt something Im used to,,
Read it kinda fast,, mighta missed the fender,, but the crash sure didnt,,
Stuffed into the car at 45 MPH,, Dont know why, but since I didnt have time to even touch brakes,, I just decided to get off,, right shoulder into passenger window,, took a 90 degree turn from her forward motion across me,, and flew about 20 feet,, Didnt break anything,, screwed up a rotator cuff,, and Boy, now I understand what happens when ya swat a fly, ya think its dead, but in a few seconds it starts buzzin and goin in circles,, That sukker is in agony,,

Title: Re: Parting Out 2006 Suzuki s40
Post by justin_o_guy2 on 07/02/20 at 13:24:59

Whats you zip code? Thatll help me figure freight..
Im in Gilmer Texas, 75645

Title: Re: Parting Out 2006 Suzuki s40
Post by BlakeEM on 07/02/20 at 13:37:29

495650574A4D7C4C7C44565A11230 wrote:

Whats you zip code? Thatll help me figure freight..
Im in Gilmer Texas, 75645

91941

Title: Re: Parting Out 2006 Suzuki s40
Post by justin_o_guy2 on 07/02/20 at 14:54:56

Im thinkin theyre gonnA WAnt the oil drained,, else itll be Hazardous,,

I need the front axle, too,, Cant imagine how that got bent,,

Wheel looks to have survived,,

Kinda like to go tubeless,, so might retire it,, and that would probably be prudent, considering the slappin it took,, NO way to know if its actually safe to use.
I Thot I was gonna just get an idea, but apparently ya need more details,, and im not sure I have even a clue what that box would weigh, and how big it would have to be,,
I guess Ill wait on your best guess,
Maybe a second box for the fender?

Ill have the money for it in a week,, but Im not in a big hurry, you dont need to stress over it, Im not quite ready to drag the bike in the shop,, and when I do, I hafta hook a battery up and check spark,, because the wrecker driver didnt turn the ey off,, I Mite bneed the sparky box,,
Mine is an 02,, I dont remember what yours is, nor do I know if it would do it for me,, Hafta ask a Guru,,

Your city,, they want that,

Title: Re: Parting Out 2006 Suzuki s40
Post by Dave on 07/03/20 at 04:27:58

For shipping forks..........remove the top caps, remove the springs, drain the oil, and then collapse the forks to reduce the length and allow the box to be smaller. Fork springs can be packed alongside the forks rather than kept inside. The font axle and other parts can be packed along side the forks.

Title: Re: Parting Out 2006 Suzuki s40
Post by BlakeEM on 07/03/20 at 06:29:11

The forks would be shipped fully intact with oil assuming they don't leak. This is how I've received used forks and it's how Traxxion Dynamics recommends people ship them. No oil should leak out.

The only forks that I can think of that may need to be drained first are on my cbx1000 because the air valve can cause them to pass oil between them when inverted but the ends could just be capped to avoid that.

Title: Re: Parting Out 2006 Suzuki s40
Post by BlakeEM on 07/03/20 at 07:26:45

The bike is disassembled and I updated the pictures, I'm just waiting on the proper size sockets so I can remove the fork caps.

https://drive.google.com/drive/folders/12G7qJQhnRdiBqK-3GZatt2woPeEGnvnu

I also have the Clymer manual in like new condition.

Title: Re: Parting Out 2006 Suzuki s40
Post by srinath on 07/03/20 at 19:25:50

If triples and risers aren't claimed by JOG (or someone else - cos I didn't read the posts) How much for those shipped to 29063.
Cool.
Srinath.

Title: Re: Parting Out 2006 Suzuki s40
Post by justin_o_guy2 on 07/03/20 at 19:32:06

I just need the fork tubes, and axle, fender, left peg, and left side lights, if they are okay,
Still don't know about the ignition module

Title: Re: Parting Out 2006 Suzuki s40
Post by srinath on 07/04/20 at 04:52:19

The stem is pressed in right ? They didn't weld up - Ofcourse not, its aluminum cast lower triple - Yea hit me with a $ OP.
Cool.
Srinath.

Title: Re: Parting Out 2006 Suzuki s40
Post by Bokobob on 07/06/20 at 07:00:56

Hello....Nice photos and writeup.
I'd like to have the Clymers and also the passenger back rest.
Let me know how much, please.
ZIP is 28056 in North Carolina

Thank you

Title: Re: Parting Out 2006 Suzuki s40
Post by srinath on 07/06/20 at 07:29:30

BTW if you bought one of my earlier ones, you for sure got one with no back rest and maybe if the buyer asked for it, and I had it I'd have given it to him, but I don't recall any one ever asking for it.

The bobber, the coffee bike, the other one all sold without, that one was on this 87 I have, and my first one was in CA I never removed that, instead I added a little girly backpack onto the back of it. The woman that came to buy it thought it was the cutest thing.

Cool.
Srinath.

Title: Re: Parting Out 2006 Suzuki s40
Post by srinath on 07/07/20 at 12:25:33

Bob is my next town neighbor and I'm giving it to him - not selling it
I'll delete my post and PM bob.

Cool.
Srinath.

Title: Re: Parting Out 2006 Suzuki s40
Post by whizzer on 07/10/20 at 09:03:10

What condition are the chrome head covers in?

Title: Re: Parting Out 2006 Suzuki s40
Post by BlakeEM on 07/10/20 at 17:23:23

I been busy fixing up and selling some vehicles but finally got around to getting the forks out and taking more pictures.
All pictures can be found here: https://drive.google.com/drive/folders/12G7qJQhnRdiBqK-3GZatt2woPeEGnvnu

So far I've only sold the carbs. I'll remove pictures once they are sold.

@justin_o_guy2 I uploaded some detailed pictures of the tank, forks, and front turn signals. The rear signals don't look good so I don't think they are worth selling. The forks do not leak when upside-down so they should be fine to ship fully assembled.

Tank:
https://drive.google.com/file/d/17Y-TOI1vUBgisnppd8a1L5TtVy0iZ5S8/view?usp=sharing
https://drive.google.com/file/d/1K6hELN-jPQu-z0uYe2QjgAv8Xs7GTg2P/view?usp=sharing
https://drive.google.com/file/d/1VBwwyyAFOoMxymdRdov5E5nJC23GHAJL/view?usp=sharing
https://drive.google.com/file/d/1bDKD0aQy4aK9w08K5FuNuxU5opuk4n6X/view?usp=sharing
https://drive.google.com/file/d/1g5PEfoeN5nrdGtpP52w5_CeqkapqPHgj/view?usp=sharing

Front Turn Signals:
https://drive.google.com/file/d/1oUd87LWO49PBJzKRhCvIjWOZYct3DnEV/view?usp=sharing

Forks: https://drive.google.com/file/d/1cybx790C5lEJlz6qk1mlj_cLO0XkAehi/view?usp=sharing
https://drive.google.com/file/d/1xGnt6tCLvC1UxoTsjQS7G8l2x3V6j65B/view?usp=sharing

@Bokobob I'd only want to sell the seat rest with the luggage rack since they would be hard to sell separate. Do you need the chrome side pieces that attach it to the rear fender? They appear to be different than the ones without the seat/rack. I'd sell the seat/rack for $100 and $120 if it includes the side chrome parts + shipping.

The side parts:
https://drive.google.com/file/d/1F7cKCBhHR4NB5Z5Igg609jOkuPgasDMj/view?usp=sharing

Seat+rack:
https://drive.google.com/file/d/12Ncnp0lNWl_Ks8gyG9enV4hMrlFZL9TT/view?usp=sharing
https://drive.google.com/file/d/1P0h5CyYDm9J9LzDN0kAoG7HHLz1nAHWj/view?usp=sharing
https://drive.google.com/file/d/1PxohPUZesAQnYpQwdPsGSDSbq9GVXFD8/view?usp=sharing
https://drive.google.com/file/d/1laJxx5H9PWupe8FNH9fEdzcRhjUWbZVA/view?usp=sharing

@whizzer Chrome head covers are in good shape, little bit of pitting where you can't see. They look good from the side on the bike. See the pictures.

https://drive.google.com/file/d/19IpqG7rp2dP-GFartoP6WQ5Zm6CKouV3/view?usp=sharing
https://drive.google.com/file/d/15MOtt7YJN1nCJOy9C-akbVRlagLOsYM1/view?usp=sharing
https://drive.google.com/file/d/1b93PutjRVw4MkpLcoJIfY832d4sQNz2O/view?usp=sharing
https://drive.google.com/file/d/1tHKLpZe-TaIlmEobAsa4a7ZOExw13SiZ/view?usp=sharing

Title: Re: Parting Out 2006 Suzuki s40
Post by justin_o_guy2 on 07/11/20 at 10:29:09

Im in for the
Forks
fender
whatever signals you think are worth sellin.
and maybe the tank,,

Im pretty clever at makin stuff work, so, if you dont think some signals are worth selling, just toss them in and Ill see if I can get use out of them,okay?

Hit me with your numbersl,

I know ya said 200 on the tank,, but I dont remember the
Fender and Forks, etc,,

Title: Re: Parting Out 2006 Suzuki s40
Post by justin_o_guy2 on 07/14/20 at 12:12:50

Forgot front axle..

Title: Re: Parting Out 2006 Suzuki s40
Post by BlakeEM on 07/14/20 at 20:00:05

@justin_o_guy2

I'd sell the forks for $120 + shipping.
I added some more pictures with the front fender and foot peg assemblies so check out the pictures if you still need those.

https://drive.google.com/drive/folders/12G7qJQhnRdiBqK-3GZatt2woPeEGnvnu

The front fender has one small dent (easy to tap out from the other side) and some scratches in the paint. You can see them clearly in this photo.

https://drive.google.com/file/d/1IuOpGPaZAgL_MuONy_rT7GIbSYSNPuDw/view?usp=sharing

I'd sell the fender for $40 + shipping.

Title: Re: Parting Out 2006 Suzuki s40
Post by RustinPeace on 07/15/20 at 07:48:43

Blake, how much for the right side crank case cover/oil cover?
Shipping would be to upstate NY, 12457.

Title: Re: Parting Out 2006 Suzuki s40
Post by justin_o_guy2 on 07/15/20 at 14:04:18

436D606A64444C010 wrote:

Yeah,, not even worried about scuffed paint on the fender,, the dent is nothing,, YOu should see what I have NOW,, Itd be days of pounding to even hope to make a fendef of it again,,

Ill take your forks and fender,, Havin problems finding the peg,, but if its a stock left side peg, not torn up, Ill take it, and the front axle,
I REaly wish I could figure out what the freight is gonna be,, approximately,,

Hell,, Ill take the tank, too,, Itll cost me too much for materials and rental tools to fix mine,, Its just not worth it, Ill be within $50.00 of your NO Hassle price,,

Just protect everything,,

Hit me with your final total,, when ya have time
Thaks,,

Yeah, Ill take that eg, with the mount and shifter,, I forgot m shifter is set up for the passenger to use it now,,

Title: Re: Parting Out 2006 Suzuki s40
Post by smokin_blue on 07/26/20 at 11:54:20

sent you a PM. Please check for it when you can.
thanks!
Smokin

Title: Re: Parting Out 2006 Suzuki s40
Post by civilsavage on 07/28/20 at 13:27:48

I'm interested in the right side cover and toolkit cover, with mounting screws for both. Didn't see any mention of these in the thread here, so I assume you still have them? Shipping would be to 44241. Please advise.

Title: Re: Parting Out 2006 Suzuki s40
Post by BlakeEM on 07/29/20 at 12:08:03

I'm on travel but once I'm back next week I'll start getting estimates to people.

@civilsavage I'll check and post some pictures once I'm back. I think that the side covers are mismatched because one of hers fell off and we accidently got some that were greenish-blue from a later year. I only have one cover that is blue.

Title: Re: Parting Out 2006 Suzuki s40
Post by civilsavage on 07/29/20 at 13:36:50

No worries over the color, I'll repaint them anyway. Actually, I'll take both side covers plus the toolkit cover if you have all 3. (Also with the mounting screws, as I said before.)

Title: Re: Parting Out 2006 Suzuki s40
Post by MisterChris on 07/30/20 at 11:48:43

Hi Blake, I can see some support bars for saddle bags in the pictures. I'd be interested in those. How much? I'm in Chicago.
Chris

Title: Re: Parting Out 2006 Suzuki s40
Post by EZPZ on 08/03/20 at 17:45:06

Do you still have the left side panel (says S40)? If so. how much? I live in Manhattan ks 66502.

Title: Re: Parting Out 2006 Suzuki s40
Post by Fabricio Bino on 08/12/20 at 04:39:32

How much for the RH foot rest assy?
https://drive.google.com/drive/folders/12G7qJQhnRdiBqK-3GZatt2woPeEGnvnu
Also, how much for the gas tank cap, if you still have it

Title: Re: Parting Out 2006 Suzuki s40
Post by BlakeEM on 08/12/20 at 10:35:54

I've had a head cold after returning from travel but I'm better now so I'm going through the list and sending PMs to each person to verify what they want and giving prices. It's too hard to try to communicate on the forum, however I'll post prices and pictures here for everyone to see.

@EZPZ someone else already wanted the side covers, however I do have an extra side cover laying around. I'll check what side it's for. I'll reach out to you if they end up not getting the covers.

@Fabricio Bino $40+ shipping? It would come with the rear brake linkage.

@MisterChris I'd say $40 for the saddlebag mounts. I believe they are the OEM ones.
Here is a picture of them:
https://drive.google.com/file/d/1vitY1wR-cV9GWmyg_GRQqVzr-q0kh5JC/view?usp=sharing

I also have some "River Road Classic Compact Slant Saddlebags" that I'll give you a good deal on if interested. They are a perfect fit for the bike.

https://drive.google.com/file/d/1Irfgn21LNHnaTgcPOEaUn8X6VR173j-R/view?usp=sharing

https://drive.google.com/file/d/1UeOy7Jmo9PO5P0hg6w_j0M4vSgtgJ4f5/view?usp=sharing

https://drive.google.com/file/d/1UZCIAQUvMnn8_2RIkH-Q4TIzzj6r55z6/view?usp=sharing

https://drive.google.com/file/d/1UZ4kw0ZfRFm4GvFLN__YYzGKKQTgTV96/view?usp=sharing
I added some more photos.

@civilsavage
Side Covers: https://drive.google.com/file/d/1NXo4riAThAjgeOpJbRmu6ZAED6zaW63J/view?usp=sharing

You should all start getting PMs over the next few days.

Title: Re: Parting Out 2006 Suzuki s40
Post by EZPZ on 08/21/20 at 19:12:11

BlakeEM...did you ever get a chance to see if the extra cover you thought you might have laying around was left side?

Title: Re: Parting Out 2006 Suzuki s40
Post by BStokes on 09/08/20 at 18:34:14

Do you still have the backrest and rack? I would be very interested in those. I would need the side pieces as well as my bike never had the backrest.

Title: Re: Parting Out 2006 Suzuki s40
Post by EZPZ on 11/01/20 at 19:02:39

Did the side cover deal go through?
Also, you said you might have another side plate. Did you ever find it? I am still looking for the left side to fit a 2008.

Title: Re: Parting Out 2006 Suzuki s40
Post by BobH on 11/06/20 at 07:37:46

Blake - I sent you a PM about the saddlebags.

Title: Re: Parting Out 2006 Suzuki s40
Post by niceast on 11/27/20 at 21:12:29

how much
seat with back rest and rack
s40 side triangular panels
saddlebag mounts

Title: Re: Parting Out 2006 Suzuki s40
Post by DankiestMist420 on 12/03/20 at 06:47:46

Hey, do you have the slip on muffler available?

Sorry if what i asked doesn't make sense - new here - but i purchased a 2003 Savage recently and previous owner drilled the baffle out with a welding torch.

Thanks in advance! Also could you comment on shipping to Canada (N2A 0K1)?

Title: Re: Parting Out 2006 Suzuki s40
Post by TestPro on 12/03/20 at 13:02:21

Are the rear turn signals available? I am specifically looking for a lens cover but will buy the whole light assembly if necessary.

Title: Re: Parting Out 2006 Suzuki s40
Post by suelzlej on 01/05/21 at 20:58:48

Is the gas tank still available?
I see some people were interested but can't tell if it got bought...

Title: Re: Parting Out 2006 Suzuki s40
Post by Fabricio Bino on 01/06/21 at 05:33:57

I'm looking for the hadle switches both LH and RH

Title: Re: Parting Out 2006 Suzuki s40
Post by amhaskin89 on 02/02/21 at 15:20:50

Sorry if this was already asked but do you have it's igniter assy? (part number 32900-24B30 for reference just in case) I'm still in the process of figuring out if that's what my issue is but figured it wouldn't hurt to ask.