SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> 17-45 sprockets ??? /cgi-bin/YaBB.pl?num=1590890688 Message started by SavageMan99 on 05/30/20 at 19:04:48 |
Title: 17-45 sprockets ??? Post by SavageMan99 on 05/30/20 at 19:04:48 They look like a good fit gearing wise. I'm wondering how they will fit with my tall shocks and 530 O-ring chain? Also how long of a chain do I need? |
Title: Re: 17-45 sprockets ??? Post by Gary_in_NJ on 05/30/20 at 19:20:04 I’m running an 18/52 set-up. I purchased a 120-link x-ring chain and cut 4 or 5 links from that. With. 17/47 you may get away with a 114 link chain. You’ll have to take some measurements to be sure, or just get a 120 and cut as required. |
Title: Re: 17-45 sprockets ??? Post by SavageMan99 on 05/30/20 at 20:08:45 Thank you. |
Title: Re: 17-45 sprockets ??? Post by SavagecruiserX on 06/06/20 at 13:39:07 Hello i am new to this forum and I have a question i have a 47 tooth rear sprocket from a rollin chasis i purchased and i cannot for the life of me find a front sprocket for this bike every other frickin suzuki but not the s40 please can some one put me in the right direction thank you |
Title: Re: 17-45 sprockets ??? Post by ZSteele on 06/06/20 at 14:13:46 http://suzukisavage.com/cgi-bin/YaBB.pl?board=tech;action=display;num=1174239333 All the info needed should be there. You will need the spacer washers for the front. Otherwise the whole parts list is the 2 sprockets, chain and 2 washers. |
Title: Re: 17-45 sprockets ??? Post by badwolf on 06/06/20 at 14:34:42 The reason you can't find the stock parts, is the bike comes with a belt drive, not a chain. If it has a chain it's a non-stock or custom conversion. Nothing ''wrong'' with that, just personel prefernce. The above link should give you the low-down. |
Title: Re: 17-45 sprockets ??? Post by SavagecruiserX on 06/06/20 at 14:35:45 Thank you very much |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |