SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Size of speedo?
/cgi-bin/YaBB.pl?num=1589274131

Message started by SpamyToo on 05/12/20 at 02:02:11

Title: Size of speedo?
Post by SpamyToo on 05/12/20 at 02:02:11

I threw mine out many years ago so I'm not sure.

Does anyone know the size of the stock gauge?

I really don't want to buy one just to see the size, but I want to know if the one I sell is a good replacement for the stock one, instead of bar mounting it.

Title: Re: Size of speedo?
Post by verslagen1 on 05/12/20 at 07:05:41

I believe the stock size is 3.25"
Most go for the mini gage ~2"

Title: Re: Size of speedo?
Post by justin_o_guy2 on 05/12/20 at 07:14:19

Every picture ive seen of anyone in a speedo, theyre all too small.

Title: Re: Size of speedo?
Post by SpamyToo on 05/12/20 at 19:28:46

Ha ha, oh dang you caught me off guard with that one.

Im wondering if the 3-3/8" (85mm) would fit or be too tight. Im adding some Speedo/Tachs to my lineup that might interest some here. There has been lots of posts about what tachs to use and this might fit the bill for a few people.

And per previous requests I had it made with a black back and trip-meter. It comes with the same color options as my other ones. Polished or black stainless bezel and white or black face.

But Im not sure the depth would work in the stock LS650 placement. The GPS attachment on the back will stick out a bit. The straight connector will need about 3"(75mm) of depth, or use the 90 degree connector and be at about 2-3/8" (60mm). From the mounting face.