SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> The Marketplace >> Header pipe
/cgi-bin/YaBB.pl?num=1584830184

Message started by NMSavage on 03/21/20 at 15:36:24

Title: Header pipe
Post by NMSavage on 03/21/20 at 15:36:24

SOLD

Are you using your shelter at home time for some Savage work?

Here's a header I had custom built. I sent in the OEM header to the custom header builder so what you see is as close to original as he could make...mandrel bends. Length approximate 35 inches. Diameter approximate 2" necks down to 1.75" to fit muffler. Never mounted or used.

Asking $25 plus you pay shipping. PayPal works. I'm not a vendor nor business so please select the appropriate category for payment. PayPal or PM eayers007@gmail.com

http://https://i.imgur.com/LTos4zal.jpg

http://https://i.imgur.com/YtSDtpZl.jpg?1

http://https://i.imgur.com/Fk030qSl.jpg?1

http://https://i.imgur.com/45qmZAXl.jpg

As you can see it is tailpipe raw. I had two made and ceramic coated the one I installed.

*

Title: Re: Header pipe
Post by Armen on 03/22/20 at 07:53:26

Nice work!
Is this still available?
thanks
-Armen

Title: Re: Header pipe
Post by NMSavage on 03/25/20 at 18:02:56

Hey,

Sorry for the delay. Yes this is still available. PM me at eayers007@gmail.com and we will work out the details if you are still interested.

*

Title: Re: Header pipe
Post by LANCER on 03/26/20 at 05:31:41

Who was the builder and what was the cost ?

Title: Re: Header pipe
Post by NMSavage on 03/26/20 at 18:20:00

Contact Information
Wilson Header Manufacturing
1019 S Atkinson Ave
Roswell, NM 88203
Contact: Mark S Wilson
Title: Owner
Phone: (575) 622-1717

If memory serves me correctly $100 is what sticks in my mind. So, 100-125 would be a range I would stand behind But it was a one off. Mark is a good guy and will shoot you an honest price in today's market.

*

Title: Re: Header pipe
Post by LANCER on 03/26/20 at 18:35:38

Thanks

Title: Re: Header pipe
Post by NMSavage on 03/27/20 at 14:08:59

Lancer,

Went back and checked. Wilson Custom Header fabricated 2 pipes for me. One is the one I am offering...it was 2". One was 1.6". Cost at Wilson was $90. I had the one I mounted ceramic coated at JetHot for an additional $90.

Title: Re: Header pipe
Post by LANCER on 03/27/20 at 16:33:26

68414942436C54485F5E2D0 wrote:

Thank you for the additional info.

Title: Re: Header pipe
Post by suzi-q on 04/04/20 at 12:14:26

if that header pipe has not sold, i'll take it. thanks, su

Title: Re: Header pipe
Post by NMSavage on 04/05/20 at 07:04:54

Morning,

The pipe is still available. I'll need your address to complete the transaction. Let's take this to personal message to work out the details.

*

Title: Re: Header pipe
Post by NMSavage on 04/11/20 at 15:41:43

Suzi-q passed on the header pipe...so it's still available.

*

Title: Re: Header pipe
Post by Steve1980 on 04/12/20 at 17:56:52

I'll take it, sending a PM

Title: Re: Header pipe
Post by NMSavage on 04/13/20 at 09:57:41

I'll check out the shipping and get back to you!

*