SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Reemplazo de carburador
/cgi-bin/YaBB.pl?num=1570473370

Message started by Gwgm on 10/07/19 at 11:35:44

Title: Reemplazo de carburador
Post by Gwgm on 10/07/19 at 11:35:44

BuenS tarde comunidad savage, es mi primer publicacion y estoy tratando de familiarizarse con el foro, así que por favor les pido paciencia, mi nombre es Gustavo, soy de Argentina, tengo una savage desde hace unos 4 años, modelo 95 con apenas 8000 km. de fábrica. Estuvo muchos años guardada y siempre renegue con el CARBURADOR , diferentes problemas, nunca logré que quedara bien, siempre funcionando gorda de combustible. Quiero reemplazarlo por otro , que no sea igual, quiero saber que me aconsejan adquirir y como adaptarlo, se que en el foro ya han tocado el tema pero no se buscarlo, desde ya muchas gracias.

Title: Re: Reemplazo de carburador
Post by stewmills on 10/07/19 at 11:47:18

Translated:

Good afternoon Savage community, it is my first publication and I am trying to get acquainted with the forum, so please I ask for your patience, my name is Gustavo, I am from Argentina, I have a savage for about 4 years, model 95 with just 8000 km . of fabric. It was saved for many years and I always denied with the CARBURETOR, different problems, I never got it to look good, always running fat. I want to replace it with another one, which is not the same, I want to know that they advise me to acquire and how to adapt it, I know that in the forum they have already touched on the subject but I do not know how to look for it, thank you very much.

Title: Re: Reemplazo de carburador
Post by Gary_in_NJ on 10/07/19 at 12:33:25

If someone could post in Spanish how to rejet a carb, I believe Gustavo would appreciate it. By "never got it to look good' does he mean it's dirty? By "always runs fat" I assume that means rich. I'd like to see how a fresh spark plug looks after a short fast ride.

Title: Re: Reemplazo de carburador
Post by batman on 10/07/19 at 14:09:10

I'd like to know if he's still running a stock petcock.

Title: Re: Reemplazo de carburador
Post by DragBikeMike on 10/07/19 at 15:31:14

Bravo Stewmills! This is cool. Sure wish I was bilingual. I agree with Gary & Batman. A thorough sorting out of Gustavo's stock carburetor along with a first class petcock should do the trick.

Now how do we convey the info?

Please tell Gustavo I said welcome aboard. 8-)

Title: Re: Reemplazo de carburador
Post by Gwgm on 10/07/19 at 15:48:45

Desde ya muy agradecidos por vuestra atención, les comento que paso por 5 mecánicos, se limpió infinidad de veces, se reemplazo flotante, agujas , venturi, chiclers, diafragmas y cuanta cosa se le pudiese cambiar, pero siempre queda muy rica , emanando mucho humo negro. Si se le cambió el grifo original por uno de Yamaha sin diafragma y se anuló el conducto que va al carburator, yo lo que ya quiero porque no quiero renegar más, es reemplazar por otro modelo seguramente ustedes deben saber cual me conviene y que reformas debo hacer.

Title: Re: Reemplazo de carburador
Post by Gwgm on 10/07/19 at 15:53:07

Title: Re: Reemplazo de carburador
Post by Gary_in_NJ on 10/07/19 at 17:17:07

Gustavo,

We typically replace the fuel shut off with a model from a Yamaha Raptor. Make sure you get a genuine Yamaha part.

Title: Re: Reemplazo de carburador
Post by philthymike on 10/07/19 at 17:35:03

I love your tires Gustavo!

My sister is fluent in Spanish I'll ask her if she has time to help out

Title: Re: Reemplazo de carburador
Post by batman on 10/07/19 at 19:20:55

Yamha Rapter 660R - fuel thingy assy , 5LP-24500-01-00

Title: Re: Reemplazo de carburador
Post by ohiomoto on 10/08/19 at 05:55:09

I'm thinking "thingy assy" won't translate too well for Gustavo. :)

Title: Re: Reemplazo de carburador
Post by LANCER on 10/08/19 at 06:12:19

How about Primary Fuel Valve Assembly ?

Title: Re: Reemplazo de carburador
Post by ArkansasBrian on 10/08/19 at 17:47:30

Bienvenido Al suzukisavage.com. No estoy fluente, pero voy a tratar ayudarte.

El problema que tiene usted usualmente ocura porque la valvula por apagado la Gasolina tiene problems. La valvula del Suzuki no es buena. Si no has reemplezado, debe reemplezarlo con un Raptor Petcock de Yamaha. Es muy importante usar el parte real de Yamaha. Arriba, Batman escribio el numero del parte. Instalaccion es muy facil y los agujeros alinean.

Hay otro carburadores que puedes usar en esta motocycleta, pero necesitas partes estranos, es poquito dificil y cuesta mas que algunos cosas que puedes tratar primero. Usualmente con algunos adjustamientos estos motos son Buenos.

Puedes decirnos las tallas de loa chorros en el carburador que tienes? (No se so chorros es la palabra correcta aqui, pero hay tornillos piquenos con orificios muy piquenos que distribuyen la Gasolina) A que altitude vivas? Hay in tornillos de adjustamentos en El carburador que se cubren al factoria. Sabes que este tornillos ya esta cubierta?

Voy a describir al grupo este mensaje por sus opiniones y mas informaccion que olvido.

Title: Re: Reemplazo de carburador
Post by ArkansasBrian on 10/08/19 at 18:00:51

To all y'all English speakers: Dude runs rich, has black smoke in his exhaust, thinks a different carb will fix this. He's taken it to five mechanics and they've swapped out every carb part I understand in Spanish plus some I'm guessing on.

I told him about the Raptor Petcock and stressed the importance of a genuine Yamaha part and directed him to the part number from Batman's post.

I also told him other carbs can be used, but that we can probably coach him through this with less money hand hassle than changing the carb, which seems an odd/excessive way to solve this problem. If he continues down that line of thinking I'll try to translate a conversation with Lancer about that business ;)

Lastly, I asked him if he knew what size his jets are (also, tried to describe WHAT jets are because there are lots of definitions for that word and I don't know if the translation I used applies to the part in question), if his carb adjustment screw has been uncovered and what altitude he lives at. If y'all can think of any other pertinent questions I'll try my darndest to translate back-and-forth in a timely fashion.

All that said, I'm not really fluent and I'm looking up a lot of vocab as I go, so it's time consuming and I'll likely make mistakes ;D

Title: Re: Reemplazo de carburador
Post by Ed L. on 10/09/19 at 06:53:53

Could be the white spacer was totally removed. If I remember right that will cause the bike to run on the rich side.

Title: Re: Reemplazo de carburador
Post by stewmills on 10/09/19 at 07:39:47

70767905070004340 wrote:

Bravo Stewmills! This is cool. Sure wish I was bilingual.

Man...I'm not bilingual. I'm google-translate-lingual 8-)