SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> 94mm wiseco /cgi-bin/YaBB.pl?num=1569039680 Message started by ZSteele on 09/20/19 at 21:21:20

Title: 94mm wiseco Post by ZSteele on 09/20/19 at 21:21:20 Whose switched to this and what was the process like? Im having trouble finding any info on the forum.

Title: Re: 94mm wiseco Post by verslagen1 on 09/20/19 at 21:24:59 I have a 95, lancer didn't have those till a year later. shouldn't be a problem for the 94.  check the bore, hone it, put in the piston according to the mfr's instructions. I found it much harder to put in the blinker fluid.

Title: Re: 94mm wiseco Post by Rglad91 on 09/21/19 at 19:50:20 I put one of lancers 94mm pistons in along with some other stuff. Let me say I’ve never really done much more then some oil changes on engines and was a bit nervous when it came time to fire it up. But it started right up and runs better now then the factory setup did. Goes right back in the way you take it apart

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.