SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Handlebars.
/cgi-bin/YaBB.pl?num=1563153451

Message started by Philmh on 07/14/19 at 18:17:31

Title: Handlebars.
Post by Philmh on 07/14/19 at 18:17:31

I bought my Savage with Buffalo style bars on it.  They are a T bar style with the risers all one part of the handlebar assembly.  They are a 7" rise overall. The bike was laid down and the handlebars took the brunt of the injury.  I cannot for the life of me find the same handlebars to fit and no parts places can either.  Everywhere I look, handlebars are 3.5" on center bolts and mine seem to measure wider.

Anyone have any ideas?  Is it possible that the top tree was changed out to accommodate a wider setup? Are stock bolts wider than 3.5"?

I'll also need some advice on grips as well.  Not looking to break the bank and hopefully I can find something on Amazon. (Grips, throttle sleeve, throttle cam setup)

This is driving me crazy and I'm dying to get that bike back on the road!

Title: Re: Handlebars.
Post by Ruttly on 07/14/19 at 19:13:08

Check the ads in The Market Place , there is always someone selling take off parts from their bobber builds or try eBay. Keep after it and you'll find what you need.

Title: Re: Handlebars.
Post by batman on 07/14/19 at 20:30:42

If you see 3.5 "spread there most likely for Harleys.

Title: Re: Handlebars.
Post by verslagen1 on 07/14/19 at 22:33:55

The stock spacing is close to 4", 3.5" spacing is HD's.

You need risers that are separate or made for our bike.

Tall risers and a wide drag bar would be a close match for what you had.

Title: Re: Handlebars.
Post by Philmh on 07/15/19 at 17:03:42

To tag on and not start a new thread....

Anyone know the size of the bolt for the risers?

Part number 13 in the attached image.

Title: Re: Handlebars.
Post by PanchoTaffy on 07/23/19 at 07:10:24

It is an M10 bolt not sure on the exact length.

Title: Re: Handlebars.
Post by batman on 07/23/19 at 08:40:27

Suz. part number- bolt-, 56223-24B10

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.