SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Reg/rec wiring /cgi-bin/YaBB.pl?num=1560737501 Message started by ZSteele on 06/16/19 at 19:11:41 |
Title: Reg/rec wiring Post by ZSteele on 06/16/19 at 19:11:41 As part of my conversion I'm installing an m.unit and running a new wiring harness. My own reg/rec has 5 wires going to 2 connectors. The 3 bunch goes to the stator, no problem there. The 2 bunch goes to another 3 connector. Looking at the diagrams the R/B goes to the mainfuse and back to the battery positive. B/W goes to ground. The last wire is O/B. Theres nothing from the reg/rec in that port and Im not seeing any tie over for it to connect to the reg/rec. What the heck is this wire?! I see power split from the R/B going to the ignition switch then into the safety circuit eventually leading back to the connector. But the connector isnt sending that O/B anywhere. Is this just an intentional short or what am I missing? |
Title: Re: Reg/rec wiring Post by batman on 06/16/19 at 19:46:38 There are 5 wire and 6 wire reg/recs the older bikes had 6 , the red wire fed the ignition switch from the battery when starting , and O/BL fed power back to the O wire coming out of the ignition switch when running . the 5 wire reg/rec ties the R & O/BL wires together internally .(they are both 12volt +)as long as the red is feeding both Ignition switch and the battery, your good to go ,the O/BL may just have been left in the wiring harness but is unused, with the 5 wire reg. |
Title: Re: Reg/rec wiring Post by ZSteele on 06/16/19 at 20:03:01 Thanks for the info, weird that they still wired it into the ignition switch connector. |
Title: Re: Reg/rec wiring Post by batman on 06/16/19 at 21:02:56 There is a disadvantage to the 6 wire regulator , the O/BL wire that feeds the power to the entire bike is NOT fused , if the regulator fails , it passes a spike of power thru the whole bike and any and all light bulbs that are on at the time will blow and will also need replacement . Ask me how I know ,( 1980 GS 550) Nothing an added in line fuse can't fix. |
Title: Re: Reg/rec wiring Post by ZSteele on 06/16/19 at 21:17:21 Just to double check, the oem wiring has batt positive going to fuse and r/B from Reg/reg going to the same fuse? |
Title: Re: Reg/rec wiring Post by batman on 06/17/19 at 04:20:23 Not sure I don't have a diagram for the new bikes ,just the 86-88 Clymer, try looking in the tech references on the topic page. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |