SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Headlight upgrade finally done. /cgi-bin/YaBB.pl?num=1559834408 Message started by Xenokilla on 06/06/19 at 08:20:08 |
Title: Headlight upgrade finally done. Post by Xenokilla on 06/06/19 at 08:20:08 I used the adapter I bought from Dave. Here's the parts I ordered from amazon: https://www.amazon.com/gp/product/B01DZU30S0/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 https://www.amazon.com/gp/product/B078ZRCYYW/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 Here's everything apart: http://https://i.imgur.com/yRlPev7.jpg Here's the finished product: http://https://i.imgur.com/Yl15qVg.jpg I used a 3/8's bolt, along with 2 flange washers, 2 neoprene washers and a stop nut. It's very solid. The light is plug and play, the hard part was fitting the lens into the housing. |
Title: Re: Headlight upgrade finally done. Post by SpamyToo on 06/06/19 at 19:36:58 Looks cool in black. I also found that lamp really doesnt fit in that bucket. Way too tight with the heatsink back. |
Title: Re: Headlight upgrade finally done. Post by Xenokilla on 06/07/19 at 07:28:48 5477666A7E536868070 wrote:
Yea it was very tight. Any suggestions on a different bucket? |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |