SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> The Marketplace >> Parting out mock-up
/cgi-bin/YaBB.pl?num=1556123576

Message started by SoC on 04/24/19 at 09:32:55

Title: Parting out mock-up
Post by SoC on 04/24/19 at 09:32:55

So I have decided to part out the mock-up. Basically everything is for sale. Bike was in a wreck so some stuff is damaged or thrown away. There is a clean title. There is a motor, had 9584 on the clock. Bike was not ridable and I have never started motor. Top mount is broken but mostly there. Bought the bike from Geno's Cycles in Philly. Geno said it ran at time of wreck (obviously) and guaranteed it would run, but never followed up on it.

Frame has dent in down tube, clean title. It may be tweeked in other areas. Wheel assemblies, front and rear with tires. Most all the controls and other. Tank with a couple small dents.

All I am keeping is the belt and rear fender. Let me know what you need and what you want to pay for it. Let's not bog the forum down with money discussions, PM or email any offers. It's all got to go from the shop.

Title: Re: Parting out mock-up
Post by S40_Bandito on 07/09/19 at 09:05:25

Hi,

Wanted to check and see if you perhaps had the seat screws, the battery cover screws, tool kit screws and any other cover screws?

Let me know!

Title: Re: Parting out mock-up
Post by Pswartz on 07/10/19 at 06:47:54

What year model is it?

Title: Re: Parting out mock-up
Post by S40_Bandito on 07/10/19 at 07:30:33

I have a 2009 Suzuki Boulevard S40 LS650

0331362026313F3F3126540 wrote:

What year model is it?

Title: Re: Parting out mock-up
Post by SoC on 07/10/19 at 22:11:39

Model is an "02". As for the screws you are seeking, I probably do have most of them, but they would be in parts boxes, with lots of other miscellaneous stuff. If you don't need them quickly I could poke through the boxes, but it might take me a week or more to get to it.

Title: Re: Parting out mock-up
Post by S40_Bandito on 07/16/19 at 09:42:29

Hi SoC,

Where you able to get your hands on any of the screws?
Screws needed

1. Battery box
2. Seat
3. Tool kit cover
4. S40 badge cover on side

Title: Re: Parting out mock-up
Post by GreatDaaneM on 07/16/19 at 12:21:43

Do you still have a gas tank available? If so in what kind of condition? THANKS!