SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Wiseco pistons /cgi-bin/YaBB.pl?num=1552913477 Message started by DennisB on 03/18/19 at 05:51:17 |
Title: Wiseco pistons Post by DennisB on 03/18/19 at 05:51:17 I seem to be having a hard time finding a stock 1mm over piston for my wife's 86 savage. I've read that the dr650 piston works. Just want to be sure before I buy one that is a 90-95 dr650 that interchanges. I need to go to 95 or 96mm. The bore size is currently a very loose std bore. |
Title: Re: Wiseco pistons Post by Dave on 03/18/19 at 06:43:53 Our forum member source for the pistons is Lancer, and he has 94, 95, 96 & 97mm available: http://suzukisavage.com/cgi-bin/YaBB.pl?num=1338581006 Here is one of his eBay listings: https://www.ebay.com/itm/95mm-Wiseco-High-Compression-Pistons/123557650314 The pistons were made for the DR650 originally.....luckily they happen to fit our bike as well. I don't know the specific part numbers for each piston. The scariest part of this would be finding a place that can bore your cylinder and to it right....they only get one chance at boring it properly. Too tight and it could seize - too loose and you are starting with a worn out cylinder. |
Title: Re: Wiseco pistons Post by LANCER on 03/19/19 at 09:45:05 I have all of the pistons in stock, from 94mm up to 97mm. $199 each with free shp. for all US addresses. International is more. Dave is absolutely correct about the machine shop that bores an air cooled cylinder for a Wiseco High Compression Piston. They MUST know what they are doing. If you want to bore your cylinder larger you need to find a shop that dies this work frequently. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |