SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> The Marketplace >> Top triple clamp /cgi-bin/YaBB.pl?num=1549061357 Message started by SpamyToo on 02/01/19 at 14:49:17 |
Title: Top triple clamp Post by SpamyToo on 02/01/19 at 14:49:17 These have been long overdue. Sorry if you had wanted them before and I didnt have them ready. But now Ive got them in stock, a few now and bunch more in about a month. There are four options, Black, Polished, bars or no bars. They can be ordered directly from the site. Dcmotive.com https://dcmotive.com/products/suzuki-ls650-s40-savage-flat-pinch-triple-clamp |
Title: Re: Top triple clamp Post by LANCER on 02/01/19 at 18:07:28 Nice work ! |
Title: Re: Top triple clamp Post by Armen on 02/02/19 at 06:11:31 Beautiful work! |
Title: Re: Top triple clamp Post by SpamyToo on 03/01/19 at 20:31:49 I havent been able to get good pics yet, but here is a view of the triple clamp with the bar mounts running fat bars... |
Title: Re: Top triple clamp Post by SpamyToo on 03/01/19 at 20:40:59 Here is a quick vid. I wanted to show installation but I needed another set of hands for the camera even though the installation is super easy and a perfect fit. https://youtu.be/ZvpUpYi2eaI |
Title: Re: Top triple clamp Post by SpamyToo on 03/02/19 at 13:46:27 Question for you guys, would many be interested in the type of fork pre-load adjusters I had used here? Im considering stocking something like these, but these particular ones are not anodized very well, scratches off way too easy. So I may build or source more durable ones myself if there is enough interest. (Side note for those who may have seen my triples for the first time and think, man those sure are similar to the ones on Ryca's website. Well that's not coincidence, I designed that triple and had the first one on my bike for a few years. That company still produces them and he does fine work. These are my next version, actually v5 to be exact. This version I produce and sell myself.) http://https://static1.squarespace.com/static/599a7976579fb3a4cb84b290/5a495835e4966b19e3096b9f/5c3e96ae40ec9a01b8d51a1f/1547605845128/Suzuki+LS650+dcmotive+triple+clamp.gif?format=750w |
Title: Re: Top triple clamp Post by Armen on 03/03/19 at 06:32:35 Someone referenced a preload adjuster for another bike (I forgot which one). Found them on Ebay (new) pretty cheap. |
Title: Re: Top triple clamp Post by SpamyToo on 03/18/19 at 08:17:23 Boxing some triples up, I had to take some pics. |
Title: Re: Top triple clamp Post by SpamyToo on 03/18/19 at 08:18:19 ... |
Title: Re: Top triple clamp Post by SpamyToo on 03/18/19 at 08:24:34 ... |
Title: Re: Top triple clamp Post by SpamyToo on 03/18/19 at 08:26:16 ... |
Title: Re: Top triple clamp Post by SpamyToo on 03/18/19 at 08:26:53 ... |
Title: Re: Top triple clamp Post by SpamyToo on 03/18/19 at 08:28:54 Cx500 triple |
Title: Re: Top triple clamp Post by ZSteele on 03/30/19 at 19:16:48 Any idea when the polished with riser holes will be available again? |
Title: Re: Top triple clamp Post by SpamyToo on 03/31/19 at 02:48:34 In about 1 week we should be restocked on those. Ill keep this post up to date with the details. |
Title: Re: Top triple clamp Post by zipidachimp on 03/31/19 at 22:31:33 Hi: can you tell me the dia. of the riser holes? Cheers! 8-) |
Title: Re: Top triple clamp Post by SpamyToo on 03/31/19 at 22:38:35 The holes in the triple are meant for 12mm bolts. And there is roughly 25mm diameter of clearance for the riser base if you were going to use your own risers. |
Title: Re: Top triple clamp Post by SpamyToo on 04/12/19 at 22:38:19 A couple of days later than I expected but the all the items are back in stock now. |
Title: Re: Top triple clamp Post by zipidachimp on 07/26/19 at 00:09:33 PM sent ! Cheers! 8-) |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |