SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Does anyone have a crystal parts ball.
/cgi-bin/YaBB.pl?num=1540125595

Message started by Theblackestofmattes on 10/21/18 at 05:39:55

Title: Does anyone have a crystal parts ball.
Post by Theblackestofmattes on 10/21/18 at 05:39:55

Is there anyway to tell if parts from an older bike would fit a newer bike? I wrecked my 2011 and I've found a used parts dealer who has a 04 for peg. Is there a reference guide, or some other way of knowing without possibly wasting the money to buy and find out?
Thanks for taking the time to read

Title: Re: Does anyone have a crystal parts ball.
Post by GOF on 10/21/18 at 06:10:44

You can look up both bikes and see if the parts you need are the same.

Title: Re: Does anyone have a crystal parts ball.
Post by justin_o_guy2 on 10/21/18 at 08:21:30

What parts?

Title: Re: Does anyone have a crystal parts ball.
Post by Ed L. on 10/21/18 at 09:54:24

The divider for part compatibility is usually whether the bike is a 4 speed or a 5 speed at least for engines and electrical. The last re-badge was pretty much that, just a change in name and with a discontinued back rest. More knowledgeable posters can help better than I.

Title: Re: Does anyone have a crystal parts ball.
Post by IslandRoad on 10/21/18 at 12:58:40

At some point in the past the turn signals changed too. Not just the style, I believe they also mount differently.

Title: Re: Does anyone have a crystal parts ball.
Post by Theblackestofmattes on 10/21/18 at 18:10:09

4E5157504D4A7B4B7B43515D16240 wrote:

What parts?

Specifically it is the right front foot peg. Put i do need the right side turn signals as well.

Title: Re: Does anyone have a crystal parts ball.
Post by batman on 10/21/18 at 18:29:38

Check out the different year parts at a site like -Ron Ayers

Title: Re: Does anyone have a crystal parts ball.
Post by justin_o_guy2 on 10/21/18 at 19:25:44

You can straighten out the pegs sometimes.
The signals are expensive.
After market may be the way to go.

Title: Re: Does anyone have a crystal parts ball.
Post by IslandRoad on 10/21/18 at 19:57:05

392620273A3D0C3C0C34262A61530 wrote:

You can straighten out the pegs sometimes.
The signals are expensive.
After market may be the way to go.

Can confirm ... once the rubber is off it doesn't take much with a hammer or a vice to abuse the peg back into acceptable shape.

Title: Re: Does anyone have a crystal parts ball.
Post by Dave on 10/22/18 at 03:16:37

2004 is when a lot of the wiring changed - along with the shape/style of the turn signals. The wire connectors for the harness changed, and the bike got emergency flashers and a headlight flasher button.

Title: Re: Does anyone have a crystal parts ball.
Post by Theblackestofmattes on 10/22/18 at 03:37:36

657A7C7B6661506050687A763D0F0 wrote:

You can straighten out the pegs sometimes.
The signals are expensive.
After market may be the way to go.

The metal of the front peg snapped >:(

Title: Re: Does anyone have a crystal parts ball.
Post by Eegore on 10/22/18 at 06:39:18

I've broke at least 5 foot pegs, every replacement I have bought has been the same, I don't think they have ever been changed.

Title: Re: Does anyone have a crystal parts ball.
Post by SoC on 10/22/18 at 10:56:52

I might have right turn signals from an "02". They are buried in a box in the shop, won't get there until Thursday, will look next time there. They may need some clean up.

Title: Re: Does anyone have a crystal parts ball.
Post by justin_o_guy2 on 10/22/18 at 11:13:49

0E2E2C24392E4B0 wrote:

I've broke at least 5 foot pegs, every replacement I have bought has been the same, I don't think they have ever been changed.

That's Gotta be some kinda record.
How did you manage to do that?

Title: Re: Does anyone have a crystal parts ball.
Post by Eegore on 10/23/18 at 07:21:03

I wreck a lot.

Title: Re: Does anyone have a crystal parts ball.
Post by justin_o_guy2 on 10/23/18 at 14:00:04

Well, stop IT!
You're gonna get your dumbass hurt.
What are you doing that causes the falls?
Seriously, video

How to not suck at cornering

And

Twist of the Wrist II.
Is a book. I've read it five times and I see what reading it over and over has done for me. Learning to Not roll off when things get spooky has saved me from dropping it.

If a technique works at speed, it's good at easy speeds.
Now, back to the topic..

Title: Re: Does anyone have a crystal parts ball.
Post by Eegore on 10/23/18 at 16:19:17

"What are you doing that causes the falls?"

Testing certain object integrities such as a fork brace. At least three of them were off-roading on my old 86 or 87. Ice rink challenge. Frame slider test. Just whatever we are doing at the time.

Harley pegs fit with little modification by the way.

Title: Re: Does anyone have a crystal parts ball.
Post by Theblackestofmattes on 10/25/18 at 12:11:29

5C5D584A494A455840422B0 wrote:

I might have right turn signals from an "02". They are buried in a box in the shop, won't get there until Thursday, will look next time there. They may need some clean up.

I would love to take them off your hands. Let me know if you find them

Title: Re: Does anyone have a crystal parts ball.
Post by SoC on 10/25/18 at 20:12:39

I was in shop today and looked at turn signals I have. They were in a little worse condition than remembered, attached a photo. If interested let me know, I will send them for shipping and a small donate to the forum.

Title: Re: Does anyone have a crystal parts ball.
Post by keithloomis on 10/26/18 at 09:44:54

If Theblackestofmattes does not want these I am interested. Just purchased an 03 with no signals. Give him plenty of time to respond though as hes got dibs.

Title: Re: Does anyone have a crystal parts ball.
Post by Theblackestofmattes on 10/28/18 at 18:51:29

3D3C392B282B243921234A0 wrote:

Hey SoC
Yeah I'll take them. Im not sure that i can send pms yet on the forum. How should i proceed?

Title: Re: Does anyone have a crystal parts ball.
Post by ohiomoto on 10/29/18 at 06:34:23

You only need 10 posts, so post one more time and send a pm.

Title: Re: Does anyone have a crystal parts ball.
Post by SoC on 10/29/18 at 08:26:05

Blackestofmattes, I will need an address for shipping. With that I can determine the cost. They will fit in a small box. Then I would say a $25.00 donate to the forum would suffice.

I will send an email also so you have a contact.

Title: Re: Does anyone have a crystal parts ball.
Post by SoC on 10/29/18 at 08:28:36

Sent a PM, wouldn't allow email.

Title: Re: Does anyone have a crystal parts ball.
Post by SoC on 11/13/18 at 21:46:53

Blackestofmattes, Thanks for donation to forum, box went out this evening, hopefully will have it tomorrow.