SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Cable drive speedometer /cgi-bin/YaBB.pl?num=1531338598 Message started by hotrod on 07/11/18 at 12:49:58 |
Title: Cable drive speedometer Post by hotrod on 07/11/18 at 12:49:58 Is anyone using a front axle to speedometer , cable driven unit ? Something like the Honda 550- 750 models from the seventies were driven off the front axle, and had 19 inch front wheels also. Some Harley models used that system, but I don't know what years. Seems like something like that would work , even if the existing axle spacers had to be cut down to make room for the drive gear. Any suggestions ? |
Title: Re: Cable drive speedometer Post by verslagen1 on 07/11/18 at 14:19:34 The gs series suzuki's had a front axle drive speedo. They have a notch in the hub that drives a bevel gear. |
Title: Re: Cable drive speedometer Post by faffi on 07/12/18 at 13:27:24 Go to Partzilla.com and search - 90% of bikes from Japan until the mid-80s had speedo drive off the front wheel, and most bikes above 450cc had 19in front wheels. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |