SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Dyna muff pipe fit
/cgi-bin/YaBB.pl?num=1530819431

Message started by SavageMan99 on 07/05/18 at 12:37:11

Title: Dyna muff pipe fit
Post by SavageMan99 on 07/05/18 at 12:37:11

Mounting my Harley muffler. Using the stock bracket. There is a gap between the pipe and muffler. Will flex pipe fit over the stock pipe and in the muffler?

Title: Re: Dyna muff pipe fit
Post by engineer on 07/05/18 at 19:28:20

There is this guide that is in the tech section:
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1298689417

And here are instructions and a drawing of an adapter that Dave made up. It can be fabricated at a muffler shop or you can do it yourself if you have some basic welding and metal working skills. I made the adapter and it works fine. http://suzukisavage.com/cgi-bin/YaBB.pl?num=1353284557