SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Mixture screw installation /cgi-bin/YaBB.pl?num=1527342748 Message started by edison on 05/26/18 at 06:52:28 |
Title: Mixture screw installation Post by edison on 05/26/18 at 06:52:28 Putting the carb back together after cleaning..... Installation of the mixture screw is first the seal> washer >spring then mixture screw, correct? Can I place it in as a single unit (i.e. washer and seal on the screw or do they go in separately?). Still trying to figure out the spring's function. Thanks! |
Title: Re: Mixture screw installation Post by norm92de on 05/26/18 at 07:29:49 Edison, The function of the spring is friction, to prevent the screw from turning due to vibration. You have the order correct it all goes in together. Very gently and carefully. |
Title: Re: Mixture screw installation Post by edison on 05/26/18 at 09:15:22 Thanks again! |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |