SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> forword controls
/cgi-bin/YaBB.pl?num=1520743139

Message started by mz250 on 03/10/18 at 20:38:58

Title: forword controls
Post by mz250 on 03/10/18 at 20:38:58

Hi all finally got myself a 2014 S40 but it is so uncomfortable after about half hour of riding so I was wondering if anyone has any Auto-cad DWGs of forward controls they would like to share ? I work where I have access to a laser cutter so can get them cut if
Cheers

Title: Re: forword controls
Post by Chip 2010 on 03/21/18 at 08:11:09

It's not that difficult to make your own. I made mine by pulling the left foot control bracket (for use as a spacing template) and drawing on a piece of 1/4" sheet steel. Once I had a shape that I liked and a reasonable distance forward (anything is better than stock when you have a 34" inseam) I had a welding shop cut the pieces out and weld the pegs (for shift and brake pedal- I used metric bolts) and tabs. I used horseshoes for my foot pegs and painted everything gloss black. Has worked great for 4000 miles or so. Or from what I've seen, Ed L (used to make them, not sure if he still does).
I'm considering making myself a new set to move my feet a little farther forward since I just put longer fork tubes on and now have more room.