SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Brake master cylinder
/cgi-bin/YaBB.pl?num=1520100202

Message started by TheSavageRookie on 03/03/18 at 10:03:22

Title: Brake master cylinder
Post by TheSavageRookie on 03/03/18 at 10:03:22

Hey guys so I have an 87 savage and bought a used master cylinder off of an 03. I'm noticing the brake switch connectors are different. What do I do?

Title: Re: Brake master cylinder
Post by justin_o_guy2 on 03/03/18 at 10:39:40

Get the right connection and splice it into the wiring harness?
Did you get the master cylinder from a junk yard?
If you can find a junkyard, I'd expect that connector to be cheap.

Title: Re: Brake master cylinder
Post by TheSavageRookie on 03/03/18 at 13:16:48

I bought it off of someone parting their bike out. How much more or less should I expect to pay?

Title: Re: Brake master cylinder
Post by justin_o_guy2 on 03/03/18 at 18:41:01

I've got no idea.
Before you do anything, you should bleed it and get pressure on the pads.
Prove it works.
The wires just light the brake light.
You can put your foot on the pedal and do that till you get it right.