|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Suzuki Boulevard S40 /cgi-bin/YaBB.pl?num=1504892140 Message started by SAYA on 09/08/17 at 10:35:40 |
|
Title: Suzuki Boulevard S40 Post by SAYA on 09/08/17 at 10:35:40 hi, I am having Suzuki boulevard S40 Model 2009. Can you please confirm what is the guage / thread size of the oil drain plug? Is it M12 x 1.25 or M14 x 1.5!or what?? Part number of Drain bolt is 09247-14026... Anybody?? |
|
Title: Re: Suzuki Boulevard S40 Post by stewmills on 09/08/17 at 14:14:37 Looking at DennisKirk, it says Dimensions: Thread Size: 14 x 1.25mm Thread Length: 1/2 in. Installed Length with Magnet: .61 in. Hex Size: 14mm |
|
Title: Re: Suzuki Boulevard S40 Post by SAYA on 09/08/17 at 19:27:52 Thank you very much brother |
|
Title: Re: Suzuki Boulevard S40 Post by SAYA on 09/11/17 at 21:01:28 Hi Stewmills, I would like to clarify that is 1.25 the spacing between threads? and secondly if the length of bolt with magent is 0.3 inch is that also okay? regards, Shahid |
|
Title: Re: Suzuki Boulevard S40 Post by piedmontbuckeye on 09/12/17 at 13:17:27 3F38293B212520203F4C0 wrote:
I never measured mine, but I doubt that the head size AND the body size are both 14mm. |
|
Title: Re: Suzuki Boulevard S40 Post by stewmills on 09/12/17 at 14:50:04 Yeah, that's just what the website says. I didn't measure mine, but IIRC my head size is 14mm, taking a 14mm socket wrench to remove. I have a thread gauge, but can't afford to remove my plug and lose all the oil to measure the thread size. Sorry. I think their website reference may be wrong as other references I now see indicate a M12 x 1.25 thread with 14mm hex head, 20mm thread length. |
|
Title: Re: Suzuki Boulevard S40 Post by piedmontbuckeye on 09/12/17 at 15:06:44 242332203A3E3B3B24570 wrote:
That sounds more like it! |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |