|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> in take port center length /cgi-bin/YaBB.pl?num=1487729122 Message started by batman on 02/21/17 at 18:05:22 |
|
Title: in take port center length Post by batman on 02/21/17 at 18:05:22 I'd like to know if someone who has a chance could measure the center length of the intake port from the carb mounting flange to the back of the closed in take valve . |
|
Title: Re: in take port center length Post by justin_o_guy2 on 02/21/17 at 19:05:38 Holler at someone who is about to pull the carb. |
|
Title: Re: in take port center length Post by verslagen1 on 02/21/17 at 20:06:40 88mm from valve center to center of intake rubber where carb sits 110mm overall length of carb 80mm intake rubber ducky mounting face to mounting face. |
|
Title: Re: in take port center length Post by justin_o_guy2 on 02/21/17 at 20:25:53 Who knows that kinda stuff? |
|
Title: Re: in take port center length Post by batman on 02/21/17 at 20:36:23 Maybe the guy who built the tuned intake for the "beast", THe bike with the duel filters,Verslagen of coarse! |
|
Title: Re: in take port center length Post by justin_o_guy2 on 02/21/17 at 21:14:54 We've got enginears running out of our eers. |
|
Title: Re: in take port center length Post by verslagen1 on 02/21/17 at 21:57:31 fastest calipers in the west. |
|
Title: Re: in take port center length Post by batman on 02/22/17 at 17:32:24 We are lucky to have some engineers ! thanks Versy! |
|
Title: Re: in take port center length Post by LANCER on 02/23/17 at 03:13:22 32213637282523212A75440 wrote:
;D ;D ;D ;D ;D |
|
Title: Re: in take port center length Post by Serowbot on 02/23/17 at 08:37:40 Did anybody else hear a "Swoosh" sound from Versy's post?... :-? ;D |
|
Title: Re: in take port center length Post by verslagen1 on 02/23/17 at 09:24:51 Hmmm... I normally just hear a thumpa thumpa thumpa... |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |