SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> The Marketplace >> Stage 3 Camshaft /cgi-bin/YaBB.pl?num=1480431237 Message started by LANCER on 11/29/16 at 06:53:57 |
Title: Stage 3 Camshaft Post by LANCER on 11/29/16 at 06:53:57 I have one Stage 3 camshaft in stock, ready to go. Just $250 with your good cam core in exchange. I will have 2 more soon. |
Title: Re: Stage 3 Camshaft Post by Banzai310 on 05/21/18 at 12:14:08 Lancer, Sorry but I’m a new guy to the forum. Just using your 2 year old post to post 10 replies so that I can PM Dude’s for some used parts, Thanks! |
Title: Re: Stage 3 Camshaft Post by Banzai310 on 05/21/18 at 12:14:31 ...1 |
Title: Re: Stage 3 Camshaft Post by Banzai310 on 05/21/18 at 12:14:47 ...2 |
Title: Re: Stage 3 Camshaft Post by Banzai310 on 05/21/18 at 12:15:04 ...3 |
Title: Re: Stage 3 Camshaft Post by Banzai310 on 05/21/18 at 12:15:27 ....4 |
Title: Re: Stage 3 Camshaft Post by Banzai310 on 05/21/18 at 12:15:48 5 |
Title: Re: Stage 3 Camshaft Post by Banzai310 on 05/21/18 at 12:16:02 6 |
Title: Re: Stage 3 Camshaft Post by Banzai310 on 05/21/18 at 12:16:21 7 |
Title: Re: Stage 3 Camshaft Post by Banzai310 on 05/21/18 at 12:16:35 8 |
Title: Re: Stage 3 Camshaft Post by Banzai310 on 05/21/18 at 12:16:49 9 |
Title: Re: Stage 3 Camshaft Post by Banzai310 on 05/21/18 at 12:18:10 10. Thanks for letting me spam your ancient post so that I can PM now. That rule took me by surprise. Cheers! |
Title: Re: Stage 3 Camshaft Post by LANCER on 05/21/18 at 18:45:57 You are welcome. Is it working for you now ? [ch128516] |
Title: Re: Stage 3 Camshaft Post by Banzai310 on 05/24/18 at 00:53:22 Yep, thanks. Sorry, didn’t know my bogus posts would move your old post back to the top. My bad! |
Title: Re: Stage 3 Camshaft Post by Dave on 05/24/18 at 02:41:51 1A39362239316B6968580 wrote:
Lancer doesn't mind "free" advertising! ;) |
Title: Re: Stage 3 Camshaft Post by madmikesmech on 05/25/18 at 13:59:38 LANCER, where these stave 3 cams a one time product, or are they still available? I ask because of this being an old post Is any head mods neaded? is it too much cam for a stock displacement engine? I am pondering a build project maybe this coming winter. Thank you, Mike |
Title: Re: Stage 3 Camshaft Post by LANCER on 05/26/18 at 03:09:00 25292C2521232D3B252D2B20480 wrote:
They are available, as long as I can get old cam cores in exchange. Getting those is the only way to continue making the improved camshafts at a reasonable cost. Nothing is required on the engine if you want to install a Stage 3 Camshaft. No head work is needed unless you just want to; you use the stock valve springs; valve adjustment settings is within stock specs; stock rockers can be used as long as there is no noticeable wear but if they are flattened at all they should be replaced. When I had the first Stage 1 Cam made it was installed with nothing being done...just dropped it in. Worked great. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |