SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Torque limiter conversion, generator cover mod
/cgi-bin/YaBB.pl?num=1409784194

Message started by Jsud04 on 09/03/14 at 15:43:14

Title: Torque limiter conversion, generator cover mod
Post by Jsud04 on 09/03/14 at 15:43:14

Who has modified a pre 96 generator cover to fit a 96+ limiter?

How did it hold up?

Title: Re: Torque limiter conversion, generator cover mod
Post by Dave on 09/03/14 at 17:39:01

You really need to look in the Technical Section and look for this stuff before you post.....most of the things you want to know are in there.

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1181745927

http://suzukisavage.com/cgi-bin/YaBB.pl?num=1288911670

Then if you can't find what you need, and using the "search" function doesn't get you a valid thread....then post a new question.

Title: Re: Torque limiter conversion, generator cover mod
Post by Jsud04 on 09/03/14 at 17:41:23

I knew that was there, what I want to know is how it holds up, if you compare the new covers to the old ones they are reenforced in the area of the boss.

But sorry.