SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> kick stand
/cgi-bin/YaBB.pl?num=1391043975

Message started by CrazyCanuck on 01/29/14 at 17:06:15

Title: kick stand
Post by CrazyCanuck on 01/29/14 at 17:06:15

Hello everyone,

just picked up a '86 savage that im going to retro into a bobber/chopper but before i get to the fun stuff theres some issues that need to be addressed for starters the kick stand switch is being held by a zip tie....lol  anyone know where i can source out a new stand and mechanism?  im based out of toronto canada but have family in the USA that can pick up for me

thanks

Title: Re: kick stand
Post by Dave on 01/29/14 at 17:50:31

The Kick Stand switch is a safety device, that often fails.  If you put the bike in gear with the stand still down, the engine stalls.  When/if the switch fails - it can stall the bike and you may spend a long time trying to figure out why.  If you are an experienced rider and not prone to riding off with the kickstand down....you can just bypass the kickstand switch and "forgetta bout it".

Title: Re: kick stand
Post by CrazyCanuck on 01/30/14 at 21:43:48

but if i wanted to replace it anyways is there a aftermarket brand you would recommend?

Title: Re: kick stand
Post by Dave on 01/31/14 at 05:20:30


4079696A796964786A0B0 wrote:
but if i wanted to replace it anyways is there a aftermarket brand you would recommend?


Nope.....

This bike is a limited production bike, and it does not get the aftermarket attention that more popular bikes do.  Some parts just need to be bought from the factory - or you need to adapt some generic parts.

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.