SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Brass Pegs easy install
/cgi-bin/YaBB.pl?num=1352400289

Message started by elitemunkeycrew on 11/08/12 at 10:44:48

Title: Brass Pegs easy install
Post by elitemunkeycrew on 11/08/12 at 10:44:48

I found these brass pegs over at lowbrowcustoms.com and they are super easy to install and look good on the bike.

Here is little video of how they look:
http://www.youtube.com/watch?v=4JSadcGEu2c&feature=plcp

Title: Re: Brass Pegs easy install
Post by Pine on 11/08/12 at 11:34:04

Nice... just need a "primer" in the end!

Title: Re: Brass Pegs easy install
Post by elitemunkeycrew on 11/08/12 at 12:04:53

61585F54455E43310 wrote:

Nice... just need a "primer" in the end!

I'm sorry but I think I missing something. Could you elaborate?

Title: Re: Brass Pegs easy install
Post by Bubba on 11/08/12 at 12:12:17

How's the vibration on those?

Title: Re: Brass Pegs easy install
Post by EJID on 11/08/12 at 12:33:41

I was going to question the vibration as well. Mine had some all metal spike-type pegs on it when I bought it, and my feet felt all sorts of vibrations. I switched to some ISO style pegs and they feel much more comfortable to me. Just wonder if you've noticed the difference.

This is what mine used to look like...
http://p1.bikepics.com/2010/09/19/bikepics-2064130-full.jpg

and now...
http://p1.bikepics.com/2011/07/18/bikepics-2242177-800.jpg

Title: Re: Brass Pegs easy install
Post by elitemunkeycrew on 11/08/12 at 12:39:14

053225252676777F74470 wrote:

How's the vibration on those?

Actually, I've never even noticed the vibration so it must not be that prevalent. I will check on the ride home today and tell you if I feel anything.

Title: Re: Brass Pegs easy install
Post by ToesNose on 11/08/12 at 14:29:53

E.M.C. do they sag downward like most aftermarket pegs do? Or do they stay straight out solid :-?

Title: Re: Brass Pegs easy install
Post by elitemunkeycrew on 11/08/12 at 14:56:16

013A30261B3A2630550 wrote:

E.M.C. do they sag downward like most aftermarket pegs do? Or do they stay straight out solid :-?

I was worried about sagging as well and it does seem to sag very slightly but nothing noticeable. When I first installed these pegs I kept one side stock and one side aftermarket and the foot placement felt very similar.