SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Technical Documents/Reference >> Highway peg extenders
/cgi-bin/YaBB.pl?num=1347982948

Message started by BOBD on 09/18/12 at 08:42:28

Title: Highway peg extenders
Post by BOBD on 09/18/12 at 08:42:28

http://i1171.photobucket.com/albums/r552/SUZUKIS40/253c6a3e.jpg
This is what I did. I extended my highway pegs out 4" with stainless 1/4" steel bar and stainless steel bolts. Could have gone to 5 or 6", but only did 4". It's fine for me. If you have really long legs you may want to go to 6".

Title: Re: Highway peg extenders
Post by Pine on 09/18/12 at 10:04:06

Nice!
I just got my engine guards.. cant wait to try it out.

Title: Re: Highway peg extenders
Post by BOBD on 09/18/12 at 11:30:08

http://i1171.photobucket.com/albums/r552/SUZUKIS40/0c5ea460.jpg These are my 6" extenders. Because the engine guards are angled I had angle the extenders outward to get them level. If I had a way to bend them that would be better, but since I only have a 31" inseam so they work fine for me. http://i1171.photobucket.com/albums/r552/SUZUKIS40/Extender%20bent%20in_zps8a325c2a.jpg Found a way to bend the extender, A sledge hammer and a bench vice. The front wheel looks like it is close, but there is plenty of room.

Title: Re: Highway peg extenders
Post by BOBD on 09/26/12 at 10:07:31

http://i1171.photobucket.com/albums/r552/SUZUKIS40/Highwaypegsmodified_zpsb0852b59.jpg Just modified the pegs to have a heel rest. They both fold up. I used some Buddy Footpegs by Bikemaster. Got them for $10 from here: http://www.cruisercustomizing.com/buddy-footpegs-10mm/part/BM-171250