SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Technical Documents/Reference >> MY SEAT LIFT MOD
/cgi-bin/YaBB.pl?num=1341147728

Message started by wambr on 07/01/12 at 06:02:07

Title: MY SEAT LIFT MOD
Post by wambr on 07/01/12 at 06:02:07

So I'll start. In General, I returned another trip with a length of about 200 miles. It was the wedding of the young bikers. Here they gave to each such label.
http://fotki.yandex.ru/users/pavelnerudo/view/497050/
http://img-fotki.yandex.ru/get/5305/68621747.2/0_7959a_c11b0110_L
I realized that I needed something to do with the driver's seat. Because my tushy after riding very strongly brimming eyes could hardly see. :( I realized that the need to raise the seat a little more. Before that I picked up the seat on 1 "in front of it, as is done here.
http://fotki.yandex.ru/users/pavelnerudo/view/497051/
http://img-fotki.yandex.ru/get/6314/68621747.2/0_7959b_af5a6426_L
But this seemed to me a little.
I removed the driver's seat and started thinking.
http://img-fotki.yandex.ru/get/5802/68621747.2/0_7959c_76d9c416_
And decided. I took all the necessary tool.
http://fotki.yandex.ru/users/pavelnerudo/view/497053/ http://fotki.yandex.ru/users/pavelnerudo/view/497053/
First you need to remove the brackets and bracket casing a driving seat.
http://fotki.yandex.ru/users/pavelnerudo/view/497054/ http://fotki.yandex.ru/users/pavelnerudo/view/497054/
http://fotki.yandex.ru/users/pavelnerudo/view/497055/
This only took a screwdriver and pliers.
http://fotki.yandex.ru/users/pavelnerudo/view/497056/
http://fotki.yandex.ru/users/pavelnerudo/view/497057/
Here's what I eventually succeeded.
http://fotki.yandex.ru/users/pavelnerudo/view/497058/
Then you need to remove the plate that are inside of the seat. I have an old enough-it motorcycle for nearly 20 years, so the plate slightly rusty.
http://img-fotki.yandex.ru/get/6314/68621747.2/0_795a3_eae97ee6_
Then I took a drill and drill bit 12 mm and 25 mm drilled holes for the plate.
http://fotki.yandex.ru/users/pavelnerudo/view/497065/
Then I put the plate in the holes and attached to the bracket driver's seat.
http://img-fotki.yandex.ru/get/6114/68621747.2/0_795a7_9cb185b2_
http://fotki.yandex.ru/users/pavelnerudo/view/497062/
Yes almost forgot! I drilled holes in the 25 mm forward. 25 mm is the distance between holes for bolts to the mounting bracket. Then I did the same with the other arm. And here's how it looks. After all this I only fix driving seat upholstery stapler. And ready!
http://fotki.yandex.ru/users/pavelnerudo/view/497064/http://fotki.yandex.ru/users/pavelnerudo/view/497064/
http://fotki.yandex.ru/users/pavelnerudo/view/497068/http://fotki.yandex.ru/users/pavelnerudo/view/497068/
It looked like my motorcycle before the mod.
http://fotki.yandex.ru/users/pavelnerudo/view/497069/
As well now.
http://img-fotki.yandex.ru/get/6314/68621747.2/0_795ae_88642fc0_
http://fotki.yandex.ru/users/pavelnerudo/view/497071/
As you can see the seat up in the back and just got back. Feels like: when I sat down I felt much more comfortable and slightly staight legs at the knees and ass has become softer.
Photo insert failed. If you can, do it instead of me.
What do you think about this?
Thank you.
p.s. this my first topic

A letter from the editor...
I added the picture from the link provided.
Some just needed the img brackets.
If you 'modify' your post you'll see the difference.
And maybe you can do the rest... please? -V1