|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> The Marketplace >> JETSETS /cgi-bin/YaBB.pl?num=1336741909 Message started by LANCER on 05/11/12 at 06:11:49 |
|
Title: JETSETS Post by LANCER on 05/11/12 at 06:11:49 JETSETS $29.95 As always, shipping included in the US Paypal to savage.s40@gmail.com Contents: #50, 52.5 & 55 pilot jets #150, 152.5 & 155 main jets Float bowl gasket 3 washers to replace white spacer http://images1.snapfish.com/232323232%7Ffp93232%3Euqcshlukaxroqdfv36973%3Enu%3D323%3A%3E639%3E697%3EWSNRCG%3D3753%3A25834339nu0mrj |
|
Title: Re: JETSET SALE Post by Pine on 05/11/12 at 08:45:49 ordered with gasket paypal sent many thanks! |
|
Title: Re: JETSET SALE Post by Badass94Cad on 05/11/12 at 08:56:04 PayPal sent for jet set and gasket. You just saved me a trip to the shop! ;) Thanks! |
|
Title: Re: JETSET SALE Post by Scott McCrory on 05/11/12 at 10:22:11 Ditto! :) |
|
Title: Re: JETSET SALE Post by kuri77 on 05/12/12 at 15:34:36 Ditto. |
|
Title: Re: JETSET SALE Post by Denise on 05/14/12 at 10:53:59 Paypal payment sent. Thanks !!! |
|
Title: Re: JETSET SALE Post by LANCER on 05/14/12 at 11:22:22 float bowl gaskets are sold out a lot of orders came in quickly so quite a few of you will receive a $3 refund for the gasket I will be ordering more parts but it will be a week or two before they get here. If you want to wait for the gaskets send me a PM and include the name under which your Paypal was processed |
|
Title: Re: JETSET SALE Post by Badass94Cad on 05/19/12 at 17:41:40 Received mine today. Thanks again! 8-) |
|
Title: Re: JETSET SALE Post by kuri77 on 05/21/12 at 19:39:59 Got it today thanks. |
|
Title: Re: JETSET SALE Post by Drifter on 05/22/12 at 12:03:15 Thanks |
|
Title: Re: JETSET SALE Post by thomasoconnor19 on 05/22/12 at 15:51:26 still have these for sale? i have a 03 savage w/ k&n cone filter and and emgo short cone muffler. not sure what jets I should be putting on yet though. |
|
Title: Re: JETSET SALE Post by Denise on 05/22/12 at 16:46:11 Got mine today, Thanks |
|
Title: Re: JETSET SALE Post by LANCER on 05/23/12 at 04:31:13 160A0D0F03110D010D0C0C0D10535B620 wrote:
Yes, JETSETS are available but I'm out of the float bowl gaskets for now. One of my stock S40's has a Emgo cone filter and the Emgo reverse cone megaphone muffler that came with the RYCA Cafe kit. I pulled the baffle out and wrapped it with fresh material since it comes with VERY LITTLE fiberglass in it. It is the pink stuff shown on the RYCA muffler video. The current jetting is a #52.5 pilot @ 2 3/4 turns out (I need to go up to a #55 pilot and reset the pilot screw) and it runs well with some small pops on occasion. The white spacer was replaced with the 3 washers and the main jet is a #152.5. It runs strong and on level ground, sitting straight up, will hit 100 indicated. On one occasion it went to 105 indicated, but after revisiting that section of interstate I believe it to have a slight downgrade which would account for the extra speed. Due to the stock camshaft the power peaks at about 85mph in 5th. It is still pulling beyond that but on a decreasing scale. This particular engine seems to have a bit more power than most stock engines; one of those FLUKEs from the assembly line that just turns out a little better than average. When I get around to pulling the carb again I will go to a 55 pilot, 2 washers on the needle & 155 main jet and see how it acts with that combo. |
|
Title: Re: JETSET SALE Post by Pine on 05/24/12 at 11:32:31 Lancer, I have still not gotten. First post says when I ordered via paypal. any idea on shipping date? |
|
Title: Re: JETSET SALE Post by LANCER on 05/24/12 at 13:56:57 162F2823322934460 wrote:
send me a pm with the name, address and email used for the paypal transaction and I will look it up |
|
Title: Re: JETSET SALE Post by gcsdls on 05/25/12 at 10:02:47 Just ordered mine...thanks a bunch! |
|
Title: Re: JETSET SALE Post by comp_pro on 05/28/12 at 18:10:07 Lancer, I just sent the paypal payment to you for $20.00. Thanks! Mark |
|
Title: Re: JETSET SALE Post by LANCER on 05/29/12 at 03:50:09 Got em |
|
Title: Re: JETSET SALE Post by comp_pro on 05/29/12 at 07:10:43 Great! Thanks Lancer! |
|
Title: Re: JETSET SALE Post by Pine on 05/31/12 at 16:05:00 Got mine! Thanks Lancer! |
|
Title: Re: JETSET SALE Post by Kyle on 06/05/12 at 06:11:34 Lancer - Still selling jet sets? |
|
Title: Re: JETSET SALE Post by LANCER on 06/06/12 at 03:57:25 514E6F681A0 wrote:
yep |
|
Title: Re: JETSET SALE Post by Greg on 06/06/12 at 05:01:55 Still have gaskets? |
|
Title: Re: JETSET SALE Post by Kyle on 06/06/12 at 05:40:58 Paypal sent. |
|
Title: Re: JETSET SALE Post by Greg on 06/06/12 at 09:44:48 Did the PayPal thing. Thanks! |
|
Title: Re: JETSET SALE Post by LANCER on 06/06/12 at 13:13:11 2421262D2A20430 wrote:
Out of gaskets but waiting on resupply |
|
Title: Re: JETSET SALE Post by SaVaGeEaRL on 06/09/12 at 17:53:02 PayPal sent, 20 bucks. You know of anywhere else to get the gasket? |
|
Title: Re: JETSET SALE Post by clearush on 06/09/12 at 22:48:47 Just sent a payment :) |
|
Title: Re: JETSET SALE Post by renegade1 on 06/10/12 at 22:51:11 how much would a set be lancer? i am in the process of getting a cone filter and dyna muffler. and i really dont know what kind of main and jet to use im an hour away from vancouver so pretty close to sea level |
|
Title: Re: JETSET SALE Post by LANCER on 06/13/12 at 05:22:53 The set is just $20 for now start with the 52.5 pilot jet if it is not there already (some newer models have it) replace the white spacer with the 3 washers on the needle 150 main jet; See how it runs on a test ride; if it feels ok then go longer to get a better feel for it in different conditions. If it runs out of power before you get to wide open throttle ... ie, like no power/speed change after 3/4 throttle even though you turn it more. Then you should try the 152.5 main jet. Or if you start with the 152.5 and when at wide open throttle IF it bogs down then you know it is too big. But if it runs strong and clean then you are good to go. |
|
Title: Re: JETSET SALE Post by renegade1 on 06/13/12 at 09:45:04 thanks lancer, that gasket has to be changed everytime or is it re-usable?? if it is not could you send message when you have them in and i'll be on the order list. |
|
Title: Re: JETSET SALE Post by LANCER on 06/13/12 at 10:10:18 594E454E4C4A4F4E1A2B0 wrote:
You can reuse the gasket if it is intact, If it cracks or tears more than just a little then you should replace it. I have reused some that were pretty badly broken but was able to maintain a continuous seal with some goopy stuff that can live with fuel, until I could get another. I've made some from gasket material from Autozone before, but did replace that with a new one when available. |
|
Title: Re: JETSET SALE Post by Dlanger13 on 06/16/12 at 13:42:19 i just sent you $20.00 via paypal, for Jetset, let me no if there are any problems. thanks dean |
|
Title: Re: JETSET SALE Post by Jaydogg25 on 06/19/12 at 13:58:01 Just sent $20 via Paypal for a kit.....thanks |
|
Title: Re: JETSET SALE Post by giltzer3 on 06/21/12 at 07:36:21 will this work on a 2012 s40? |
|
Title: Re: JETSET SALE Post by LANCER on 06/21/12 at 07:41:36 5856534B455A4D0C3F0 wrote:
Yes, it works on all. The carb is essentially unchanged since the first '86 model. The jets have changed a bit over the years and the needle no longer has adjustment grooves for the clip, but its still the same carb. |
|
Title: Re: JETSET SALE Post by giltzer3 on 06/21/12 at 08:26:44 i have a 2012 s40 and if i just put an exhaust tip on would this jet set be good enough? |
|
Title: Re: JETSET SALE Post by Greg on 06/24/12 at 07:34:48 Lancer, I sent you a pm |
|
Title: Re: JETSET SALE Post by LANCER on 06/25/12 at 03:13:44 303E3B232D322564570 wrote:
Yes, it will cover virtually any changes you make. I'm leaving this morning for the Dragon Ride and will be gone for a week. If you process the order via Paypal I will get it out when I return. |
|
Title: Re: JETSET SALE Post by LANCER on 06/25/12 at 03:14:11 4D484F4443492A0 wrote:
OK |
|
Title: Re: JETSET SALE Post by squirreldog on 06/26/12 at 16:09:53 i would like a set of jets how do i order from you? |
|
Title: Re: JETSET SALE Post by Greg on 06/26/12 at 16:11:41 Any word on my lost package? |
|
Title: Re: JETSET SALE Post by mnefred on 06/26/12 at 23:17:45 Hi Lancer, I made a rather long winded post over on the tech board, "Re: carb jetting- a progressive guide Reply #56 " I'm guessing your jet set would fix that problem for me? Thanks, Mark |
|
Title: Re: JETSET SALE Post by Hotrodchriz on 06/27/12 at 07:53:41 Payment sent for a set of jets via pay pal |
|
Title: Re: JETSET SALE Post by Dlanger13 on 06/27/12 at 13:12:52 Lancer did you forget me. Its been 11 day still not jets. Do you have any idea how long it takes to get them? are you out of the kits? please let me know. just want to get my bike on the road thanks !! |
|
Title: Re: JETSET SALE Post by Sileighty on 06/29/12 at 05:43:20 Payment sent for a set! |
|
Title: Re: JETSET SALE Post by Cam Savage on 06/29/12 at 07:34:04 PayPal payment sent for Jet Set. I am new, but this looks like one of the first things to get. |
|
Title: Re: JETSET SALE Post by jimapex on 07/02/12 at 13:08:30 Received jet set and gasket yesterday. Thank you! |
|
Title: Re: JETSET SALE Post by SaVaGeEaRL on 07/02/12 at 13:56:55 payment sent june 10th. hope lancer is doin ok... last i heard he was off to a dragon run. hope everything went ok for him. i had to move and my address has changed lol |
|
Title: Re: JETSET SALE Post by Greg on 07/02/12 at 15:47:36 I am hoping the same thing. Payment sent on June 6. No replies to PM's. Doesn't sound typical from what I can gather. |
|
Title: Re: JETSET SALE Post by Connary on 07/02/12 at 18:39:30 Lancer I just sent you an email on my order. Thanks for your help. Connary |
|
Title: Re: JETSET SALE Post by LANCER on 07/04/12 at 05:20:24 Sorry guys, several things caused delays...jet shortage, Dragon ride prep and then the ride. I did get a small shipment of jets while on the ride & will be spending a good part of today catching up on orders. |
|
Title: Re: JETSET SALE Post by LANCER on 07/04/12 at 05:21:27 273D3A3F38392F264A0 wrote:
Got the msg with new address |
|
Title: Re: JETSET SALE Post by giltzer3 on 07/04/12 at 06:07:39 How do I order? |
|
Title: Re: JETSET SALE Post by Greg on 07/04/12 at 06:19:33 4A47484543541411260 wrote:
Thanks for the update. Glad you're OK! |
|
Title: Re: JETSET SALE Post by clearush on 07/05/12 at 19:07:23 535E515C5A4D0D083F0 wrote:
ah cool I got the shipping tracking # but nuthin every came, this explains alot, will be waiting in anticipation, Its the last thing I need to get done on the engine side of this bike for right now 8-) Got them today 7/7 can put them to good use mon or tuesday when I'm off :) |
|
Title: Re: JETSET SALE Post by Greg on 07/08/12 at 18:41:45 Got them Saturday! Thanks! |
|
Title: Re: JETSET SALE Post by Bosgarage57 on 07/09/12 at 13:22:22 Lancer do you have the gasket still? How long does it take to recieve the jets? |
|
Title: Re: JETSET SALE Post by BARoth on 07/09/12 at 18:04:39 I just sent you payment for a jet kit. Thanks! |
|
Title: Re: JETSET SALE Post by LJac05 on 07/10/12 at 06:11:38 Hi Lancer, How much for shipping to Toronto, Canada?? This is my first post in the forum after reading probably hundreds of posts. I'm new to this but am learning a great deal deal thanks to all the members. Thanks SuzukiSavage.com ;) |
|
Title: Re: JETSET SALE Post by Bosgarage57 on 07/10/12 at 13:31:30 Payment sent for a set of jets |
|
Title: Re: JETSET SALE Post by Dlanger13 on 07/10/12 at 14:01:34 Lancer it has been a month since i sent u a payment through papal for a jet set. i was just woundering what was going on? all I'm waiting on is my jets so I can get this bike up and running. ETA thanks dean |
|
Title: Re: JETSET SALE Post by LANCER on 07/11/12 at 07:03:55 644C414E4745521113200 wrote:
I am behind; was gone for a while and some jets on backorder. More jets ordered with express delivery so should have them tomorrow or or Thur. That should enable me to catch up. Your Paypal info did not include a shipping address. Did you send me one separately ? I have not found a msg or email with it. I normally contact when a shipping address is not included; sometimes I miss making contact and my apology if so. |
|
Title: Re: JETSET SALE Post by RanDaMan on 07/12/12 at 14:13:13 Lancer how do i order one of the jetsets with a gasket ? :-? |
|
Title: Re: JETSET SALE Post by Dlanger13 on 07/12/12 at 15:17:28 Your Paypal info did not include a shipping address. Did you send me one separately ? I have not found a msg or email with it. I normally contact when a shipping address is not included; sometimes I miss making contact and my apology if so. Hey I was just wondering if you sent the jets, and if yes how long does it take to get them? Thanks dean On Jun 17, 2012, at 3:24 PM, Dean Langer <dlanger13@yahoo.com> wrote: OK thanks!! Dean Langer --- On Sun, 6/17/12, michael eslick <savage.s40@gmail.com> wrote: From: michael eslick <savage.s40@gmail.com> Subject: Re: dean langer sent you $20.00 USD To: "Dean Langer" <dlanger13@yahoo.com> Date: Sunday, June 17, 2012, 1:18 PM Yep, just needed your address On Jun 17, 2012, at 10:23 AM, Dean Langer wrote: sorry don't use paypay much, Dean Langer 5850 Indigo Dr. Cheyenne, Wy 82001 is that all you need? and thanks alot!! Dean Langer --- On Sun, 6/17/12, michael eslick <savage.s40@gmail.com> wrote: From: michael eslick <savage.s40@gmail.com> Subject: Re: dean langer sent you $20.00 USD To: dlanger13@yahoo.com Date: Sunday, June 17, 2012, 6:41 AM Dean I did not get a mailing address for you on Paypal. Michael sorry I can't PM until I post 10 times |
|
Title: Re: JETSET SALE Post by LANCER on 07/12/12 at 20:28:38 51626D47624E626D030 wrote:
Just add $3, for $23 total and Paypal it to the email; savage.s40@gmail.com |
|
Title: Re: JETSET SALE Post by LANCER on 07/12/12 at 20:29:56 Quote:
Yep |
|
Title: Re: JETSET SALE Post by Dlanger13 on 07/12/12 at 21:23:39 thanks |
|
Title: Re: JETSET SALE Post by RanDaMan on 07/13/12 at 04:59:15 0C010E0305125257600 wrote:
Just add $3, for $23 total and Paypal it to the email; savage.s40@gmail.com[/quote] I just recently set up my pay pal so im not quite sure how to send paypal to an email ive only ever used it through ebay :-/ EDIT Never mind i think i figured it out! ::) |
|
Title: Re: JETSET SALE Post by RanDaMan on 07/13/12 at 05:08:25 PayPal SENT! 8-) whats the usual wait time for the set? |
|
Title: Re: JETSET SALE Post by MiCTLaN on 07/13/12 at 14:04:27 Got mine today, thanks Lancer! |
|
Title: Re: JETSET SALE Post by Scott.aust on 07/14/12 at 02:10:38 Not having a whinge .... How are you going with sending my set ? |
|
Title: Re: JETSET SALE Post by giltzer3 on 07/14/12 at 02:14:03 Do we get a tracking number after it is sent out? |
|
Title: Re: JETSET SALE Post by Firetox on 07/15/12 at 07:30:26 So glad you sell these as a kit, payment and address sent WOOT FIRST MOD lol |
|
Title: Re: JETSET SALE Post by chefevild on 07/16/12 at 13:58:02 20$ sent for a kit. Please mail asap! :p What a great service for us Savage owners. Much thanks to you Lancer :) |
|
Title: Re: JETSET SALE Post by 67jake on 07/18/12 at 12:35:05 I'm a newbie so I could not PM you, but I just Paypal'd you the funds for a jet kit and a gasket. Thanks for making this available. Lord knows these little thumpers could use some tuning! Jake |
|
Title: Re: JETSET SALE Post by tizzyfit on 07/20/12 at 02:15:05 Hi Lancer, Just sent my $23.00, don't spend it all in one spot! ;D I'm in no real hurry, so whenever you get some free time, send them along. THANKS! Tizzyfit |
|
Title: Re: JETSET SALE Post by Millerman on 07/21/12 at 04:27:38 Just ordered my jet kit with gasket. Thanks Lancer! ;D |
|
Title: Re: JETSET SALE Post by giltzer3 on 07/22/12 at 18:09:27 Lancer do you know where my jet set is? |
|
Title: Re: JETSET SALE Post by LANCER on 07/23/12 at 09:40:09 All jets for all orders to date have gone out. If you don't have yours yet, including some who were still due the #155 main jet, then it will be there in a few days. |
|
Title: Re: JETSET SALE Post by Firetox on 07/25/12 at 09:22:55 Got mine the other day thanks man |
|
Title: Re: JETSET SALE Post by 67jake on 07/25/12 at 15:13:14 Got mine today. Thanks Lancer :) |
|
Title: Re: JETSET SALE Post by giltzer3 on 07/25/12 at 15:14:37 Does anyone have a diy for the jet set kit. How to install it |
|
Title: Re: JETSET SALE Post by SaVaGeEaRL on 07/25/12 at 16:12:35 http://www.youtube.com/watch?v=rFFuF9QZ4IM&feature=youtube_gdata_player |
|
Title: Re: JETSET SALE Post by chefevild on 07/25/12 at 18:18:49 Got mine today yaaay! |
|
Title: Re: JETSET SALE Post by SaVaGeEaRL on 07/26/12 at 16:19:37 Got them in and installed. Bike runs fantabulously |
|
Title: Re: JETSET SALE Post by Barrett on 08/22/12 at 10:00:00 $23 sent for jet kit and gasket. Thanks Lancer |
|
Title: Re: JETSET SALE Post by FerventPiranha on 08/22/12 at 11:36:22 $23 sent for a kit and gasket a few days ago (wasn't approved as a member yet). Thanks in advance! |
|
Title: Re: JETSET SALE Post by LANCER on 08/23/12 at 06:17:06 Everyone should have received their JETSET's by now but if anyone has not then let me know right away and I will fix it. |
|
Title: Re: JETSET SALE Post by mbowman68 on 09/18/12 at 10:00:29 ok where do i paypal to so i can get a jet set |
|
Title: Re: JETSET SALE Post by LANCER on 09/18/12 at 13:20:52 0F0B0907000D150F030C535B545A620 wrote:
Paypal $24.95 to savage.s40@gmail.com Now includes float bowl gasket This includes shipping to US addresses If international then contact me first with your location for shipping cost |
|
Title: Re: JETSET SALE Post by mbowman68 on 09/20/12 at 20:52:34 ok 23$ sent |
|
Title: Re: JETSET SALE Post by Todd James on 09/20/12 at 21:38:08 Just ordered my Jet Set and Gasket. Thank You, Lancer ! |
|
Title: Re: JETSET SALE Post by busterboy on 09/21/12 at 17:29:09 Paypal sent! |
|
Title: Re: JETSET SALE Post by mbowman68 on 09/25/12 at 10:01:53 just got my email that my parts are on the way thank you lancer ;D |
|
Title: Re: JETSET SALE Post by dmj13 on 09/30/12 at 21:16:37 These still available? |
|
Title: Re: JETSET SALE Post by mbowman68 on 10/02/12 at 06:18:18 hey lancer got my jetset ty for that now im curious where i should start with it i have a stock muffler that i punched through the baffles with a piece of rebar. i live in salt lake city so kinda high elavation i plan on puting a dyna on it what do you think...oh forgot its a 01 |
|
Title: Re: JETSET SALE Post by LANCER on 11/04/12 at 06:03:05 If you are considering ordering a JETSET then be sure to check my initial entry on the first page. I have added jets and the bowl gasket back to the JETSET and adjusted the cost to cover just that expense, to reflect what folks are asking for. |
|
Title: Re: JETSET SALE Post by redsticksavage on 11/10/12 at 09:17:23 Ordered, quick shipping, installed, thanks |
|
Title: Re: JETSET SALE Post by LANCER on 11/10/12 at 11:53:45 6266646A6D6078626E613E3639370F0 wrote:
Start with the 52.5 pilot jet with the pilot screw 1 turn out, replace the white spacer with the 3 washers, and the 150 main jet. Start and run the engine for 10 minutes or ride it a good 2 miles to be sure it is completely warmed up. Adjust the pilot screw as needed for the highest idle speed, then reset the idle to 1100 rpm with the idle speed screw. |
|
Title: Re: JETSET SALE Post by Chris Roth on 11/10/12 at 18:46:55 Thanks for the deal on this Lancer, just sent you my order via PayPal. |
|
Title: Re: JETSET SALE Post by teggy on 01/17/13 at 19:51:50 Just sent you paypal for the jet set thanks in advance |
|
Title: Re: JETSET SALE Post by shrekdemon on 02/21/13 at 10:54:48 Hey Lancer, i made a payment feb 11, just wanted to know whrn i can expect the kit? |
|
Title: Re: JETSET SALE Post by LANCER on 02/22/13 at 03:57:09 5D667C6B656A6B6361600E0 wrote:
sent email |
|
Title: Re: JETSET SALE Post by G-Dawg on 02/22/13 at 08:51:43 Hey Lancer, just received my set. That was fast!!!! Thanks |
|
Title: Re: JETSET SALE Post by trini tuner on 02/22/13 at 09:42:23 Hey Lancer, i know your busy with the big move... I sent payment for a JETSET a couple days ago. Please, when you have a chance let me know when i should be expecting my new jetset. Thank you. |
|
Title: Re: JETSET SALE Post by trini tuner on 03/02/13 at 11:43:50 I just recieved my JETSET yesterday, I havent finished completely tuning the carb but i did replace the main jet with a 47.5 and the bike feels much better under WOT. Thank you for the fast shipment lancer! |
|
Title: Re: JETSET SALE Post by jiminapex on 04/02/13 at 12:09:27 New jets and gasket installed. Perfect! Thanks very much Lancer. |
|
Title: Re: JETSET SALE Post by LANCER on 04/02/13 at 17:40:30 My pleasure guys. A note to others who may have ordered stuff and have been waiting; my parts stock is low and I have ordered more but it's not here yet...for jets and carb kits. The move to Oklahoma and all that's required here in settling a bit and planning for this next year in building and all does not leave much time, so please be patient. I will get parts out but time is stretched. |
|
Title: Re: JETSET SALE Post by Coaxial on 04/03/13 at 11:25:05 Hey Lancer, I hate to bug you, I realize you are just settling in. If you do not have any jets available would you happen to know an online source where I can grab some for the savage? |
|
Title: Re: JETSET SALE Post by LANCER on 04/04/13 at 05:24:19 577B756C7D7578140 wrote:
Have jets; PM'd you |
|
Title: Re: JETSET SALE Post by TaylorT on 04/20/13 at 09:55:39 Hi Lancer, I was wondering if you had your JetSets ready to ship? I just posted a question regarding rejet advice in the RubberSideDown section. I can't PM you because I'm still under 10 posts. Thanks in advance for your reply and any advice you have. :) |
|
Title: Re: JETSET SALE Post by LANCER on 04/21/13 at 06:51:08 474A4E5B47162F0 wrote:
Yep, have jets. |
|
Title: Re: JETSET SALE Post by TaylorT on 04/21/13 at 10:27:22 6568676A6C7B3B3E090 wrote:
Yep, have jets.[/quote] Thanks for your reply and advice to my post. I just sent my payment via paypal. |
|
Title: Re: JETSET SALE Post by wearsabrowncoat on 05/06/13 at 14:07:36 Hello, Just sent a PM regading a Jetset. I was going to ask about tuning in the PM but perhaps other members may benefit from this public Q&A. I have a 97 and live 300 feet above sea level. I just did a blue collar boober kit install incuding their muffler. After install this gave me a little more backfiring and I have been tinkering with the idle mix screw. Still seems slightly more lean than when stock. When I perform the pilot swaps I plan on also adding a chinese cone filter. What would you recommend for a starting point with the pilots and spacer? |
|
Title: Re: JETSET SALE Post by LANCER on 05/07/13 at 07:44:36 44565241405251415C445D505C5247330 wrote:
I've not used the BCB muffler but from others who have it appears the jetting for the pilot circuit is on the 52.5/55 line, so start with the 52.5 and with the pilot screw at 1.5 turns out. Expect the need to go more on the rich side. Do not go beyond 3 turns out if the engine continues to increase in rpm as you turn the needle out. If/when you hit 3 turns out then go up to the 55 pilot and start the screw back at 1 turn out and tune again. You are looking for the "sweet spot", the screw position where the engine is at the highest rpm, and if you turn the screw in either direction the rpm decreases. Expect for this position to cover from 1/8 to 1/4 turn, or perhaps slightly more, with the engine not changing its sound/rpm. Just set the screw in the middle of that range. The pilot circuit (low throttle range) is set. For the BCB muffler, which is fairly high flowing from the reports of it, will benefit from using all 3 washers in the JETSET to replace the white spacer on the needle. There is not often difficulty with this "mid throttle range" and using 3 washers. If there is then we can deal with it at the time. For the main jet, start with 152.5 and see how it runs. Find an area where you can open up the throttle to wide open in 3rd or 4th gear and allow it to go to redline. If it pulls good and clean without stuttering and without a flat spot then it is usually good to go. If there is erratic running or a flat spot then to up to the 155 main jet and make the run again at wide open throttle. It must be absolutely wide open and at the throttle stop to be sure you have it there. If it pulls strong without problems then you are good. If it bogs down then the jet is too big, so back down to the 152.5. Always make sure that the engine is fully warmed up by riding for several miles if possible before starting the jetting/tuning. If you cannot ride it then let it idle for a good 10 minutes. Those are the basics. |
|
Title: Re: JETSET SALE Post by 00savage on 05/07/13 at 11:30:07 Paypal payment sent |
|
Title: Re: JETSET SALE Post by momzbike on 06/13/13 at 14:20:12 Paypal payment sent for Jet Set. |
|
Title: Re: JETSET SALE Post by Scar on 08/02/13 at 14:30:42 Do you have any of these left? If so, how long to ship to Grand Rapids, MI? |
|
Title: Re: JETSET SALE Post by Stealthmobile on 08/02/13 at 15:04:58 Hi Lancer, just wondering if you have any complete carb kits ready to go? am dreaming of riding but have lots of work to do. thanks in advance. |
|
Title: Re: JETSET SALE Post by LANCER on 08/02/13 at 17:08:15 5A5C43535845594401300 wrote:
Yes, have JETSETS available. Paypal $24.95 to savage.s40@gmail.com You should have it within a few days |
|
Title: Re: JETSET SALE Post by Stealthmobile on 08/03/13 at 13:54:38 Lancer, i'm sorry to admit that I screwed up big, I am confusing your "Jetset" (I called it a carb kit) and your complete performance carb. two very completely different things!! :-/ while I want a performance carb (and 97mm big bore, stage one cam, millions of dollars, and world peace) what I need is for now is just a Jetset . $24.95 USD and shipping. any guess on shipping cost into northern Canada? thanks in advance and again sorry about the mix up ::) Dave |
|
Title: Re: JETSET SALE Post by Nailz on 08/03/13 at 14:12:15 Payment Sent! Thanks in advance!!!! JETSET |
|
Title: Re: JETSET SALE Post by LANCER on 08/03/13 at 20:08:46 496C7B68456C7F7D687F0D0 wrote:
sent PM |
|
Title: Re: JETSET SALE Post by LANCER on 08/03/13 at 20:09:13 6748404553290 wrote:
Okie dokie |
|
Title: Re: JETSET SALE Post by slavke1976 on 08/14/13 at 10:40:07 Cant send you an PM, do you send to France, if yes what is price total? Thank you |
|
Title: Re: JETSET SALE Post by OldSport on 08/14/13 at 11:25:12 Set Payment for Jetset. Thanks in advance. |
|
Title: Re: JETSET SALE Post by Dancomer on 08/14/13 at 12:10:00 sent a PM and have not gotten a response....says you take paypal....found the email address.....money sent, wish I would have seen that earlier..... :-( |
|
Title: Re: JETSET SALE Post by Dancomer on 08/14/13 at 12:15:08 oh and thank you :-) |
|
Title: Re: JETSET SALE Post by Stealthmobile on 08/18/13 at 07:03:03 LANCER, sent payment via paypal for jetset, thanking you in advance |
|
Title: Re: JETSET SALE Post by LANCER on 08/18/13 at 20:53:29 123720331E3724263324560 wrote:
Got it. |
|
Title: Re: JETSET SALE Post by cheno on 08/23/13 at 17:18:57 Lancer, do you have Jetsets in stock? If so, how can I go about purchasing? Thanks. |
|
Title: Re: JETSET SALE Post by LANCER on 08/24/13 at 09:43:20 45564B141415260 wrote:
I'm currently short on a couple of the jet sizes but ordering resupply of those along with carb and other kit stuff, should take 7-10 days to get them. Go ahead and process via Paypal (savage.s40@gmail.com) and as soon as the order comes in I will get it on the way. For general info to all, I ship parts to anywhere in the world. Of course, for international shipping the costs go up. For the JETSETS add $5 to the $24.95 price; so a total of $29.95. |
|
Title: Re: JETSET SALE Post by LANCER on 08/24/13 at 09:45:32 1F3A353834363E295B0 wrote:
Did you get your JETSET ? |
|
Title: Re: JETSETS Post by Fishbulb on 08/27/13 at 21:33:28 Paypal sent, thank you! |
|
Title: Re: JETSETS Post by Stealthmobile on 09/03/13 at 13:10:08 LANCER, have received jetset and will now be playing with the carb and jets, having great fun I am sure. ::) just be ready for the oddball questions. am hoping to got bike running before the white stuff falls and stays. many thanks to you. david |
|
Title: Re: JETSETS Post by cheno on 09/24/13 at 06:08:58 Lancer, I am in need of two jetsets. Do you have them in stock? Thanks |
|
Title: Re: JETSETS Post by Saltwater Cowboy on 09/26/13 at 17:37:10 when do you think you will get more float bowl gaskets? then I will order. Nick |
|
Title: Re: JETSETS Post by LANCER on 09/26/13 at 19:32:18 I have 2 bowl gaskets; a few pilot jets and main jets except for the 152.5. Partial set with gasket $22.50, without gasket $20, assuming shipping within the US. International shipping is more. |
|
Title: Re: JETSETS Post by cheno on 09/30/13 at 12:46:10 Thanks. Do you have a sense of when you will restock? I need two full jet sets (i.e. with 152.5 main jets and gaskets)? |
|
Title: Re: JETSETS Post by LANCER on 10/01/13 at 03:31:32 50435E010100330 wrote:
Expected some time within the next couple of weeks .... we hope. The issue was with the Mikuni factory; they PAUSED all deliveries to their distributors while they did a top to bottom inventory to find exactly what they had. Parts are SUPPOSED to be on the way from Japan soon. |
|
Title: Re: JETSETS Post by Skitzer on 10/07/13 at 17:37:04 6C616E6365723237000 wrote:
Expected some time within the next couple of weeks .... we hope. The issue was with the Mikuni factory; they PAUSED all deliveries to their distributors while they did a top to bottom inventory to find exactly what they had. Parts are SUPPOSED to be on the way from Japan soon.[/quote] I sent you $24.95 via Paypal for 1 set. There is no rush as this is a winter project. Thanks! Skitzer |
|
Title: Re: JETSETS Post by LANCER on 10/11/13 at 14:59:34 4D75776A647B6C1E0 wrote:
Expected some time within the next couple of weeks .... we hope. The issue was with the Mikuni factory; they PAUSED all deliveries to their distributors while they did a top to bottom inventory to find exactly what they had. Parts are SUPPOSED to be on the way from Japan soon.[/quote] I sent you $24.95 via Paypal for 1 set. There is no rush as this is a winter project. Thanks! Skitzer[/quote] yep, got the confirmation & will hold for the restock |
|
Title: Re: JETSETS Post by NEHokiePokie on 10/16/13 at 09:34:20 Continuing on that line I also sent you $24.95 for a set. Same deal, no rush, it's a winter thing. Thanks! |
|
Title: Re: JETSETS Post by rextec on 10/20/13 at 12:19:01 Payment for complete jetset sent. Please let me know when these are shipping if you can. Thank you! |
|
Title: Re: JETSETS Post by rextec on 10/20/13 at 16:14:43 Oh man i guess i wont be needing these after all since i have an 87 with the 155 main in it from the factory... pulled the trigger on this without knowing. Can i get a refund on this? im sorry for the inconvenience. |
|
Title: Re: JETSETS Post by LANCER on 10/21/13 at 14:52:25 382F323E2F294A0 wrote:
No problem. PM me the name & email address you used on Paypal so I send the refund to the correct person. |
|
Title: Re: JETSETS Post by rob662ca on 10/23/13 at 16:04:30 hey lancer. do you have the jetsets back in stock? how much would it cost to ship to nova scotia, canada? |
|
Title: Re: JETSETS Post by Ap5112 on 11/06/13 at 19:39:47 Money sent for jet set thank you |
|
Title: Re: JETSETS Post by LANCER on 11/07/13 at 04:01:20 Jets on the way & should have by the first of next week. Bowl gaskets STILL on b/o. Shipping to Canada ... add $5 to the $24.95 JETSET cost. |
|
Title: Re: JETSETS Post by Tummelisa083 on 11/07/13 at 08:53:52 I sent you money via Paypal for a Jetset today. Thanks |
|
Title: Re: JETSETS Post by Ap5112 on 11/10/13 at 12:28:35 Oh I thought the gasket came with the kit so the kit I ordered does not come with that kit so I need to send you 5 more dollars? |
|
Title: Re: JETSETS Post by LANCER on 11/10/13 at 13:54:28 0D203C202D2238367E7A4C0 wrote:
No. The JETSET kit does come with the gasket normally but at this time I am out of stock and they are still back ordered with my supplier. |
|
Title: Re: JETSETS Post by NEHokiePokie on 11/14/13 at 14:50:24 Lancer, Just wondering if you sent all of the Jet sets last week? I've been keeping an eye out for them but nothing has arrived yet. I got a confirmation email on the 6th saying that the electronic shipping info was received and that is the last and only tracking update available. |
|
Title: Re: JETSETS Post by Skitzer on 11/19/13 at 11:19:24 7A77787573642421160 wrote:
Expected some time within the next couple of weeks .... we hope. The issue was with the Mikuni factory; they PAUSED all deliveries to their distributors while they did a top to bottom inventory to find exactly what they had. Parts are SUPPOSED to be on the way from Japan soon.[/quote] I sent you $24.95 via Paypal for 1 set. There is no rush as this is a winter project. Thanks! Skitzer[/quote] yep, got the confirmation & will hold for the restock[/quote] Got the jetset yesterday. All is good! Thank you kind sir. |
|
Title: Re: JETSETS Post by mnefred on 11/21/13 at 23:36:56 Hi Lancer, So, do you have everything back in stock yet? Looking forward to ordering a set. Thanks, Mark |
|
Title: Re: JETSETS Post by LANCER on 11/23/13 at 08:28:37 I have all the jets, but the bowl gaskets are STILLLLLLLL b/o. Yea, really. If you need jets go ahead with the order and I will send them now, and follow up when the gaskets make it here. |
|
Title: Re: JETSETS Post by mnefred on 11/23/13 at 22:38:06 No super hurry. Besides, Murphy lives in my garage. I figure if I try to take the float bowl off w/out a gasket handy, it'll stick and tear for sure. Don't really want to risk that with my daily driver. Will you post here when the gaskets come in? Thanks! Mark |
|
Title: Re: JETSETS Post by LANCER on 11/24/13 at 02:08:55 64676C6F7B6C6D090 wrote:
YEP |
|
Title: Re: JETSETS Post by seedubs1 on 01/10/14 at 06:35:51 Payment sent. Please hold for shipment until gasket is in stock. |
|
Title: Re: JETSETS Post by LANCER on 01/10/14 at 14:48:47 392F2F2E3F28397B4A0 wrote:
Just got the back ordered stuff so we are good to go; put them in the mail today |
|
Title: Re: JETSETS Post by PAPiekarski on 01/21/14 at 18:10:30 Money sent for a kit :-) Thanks, Peter |
|
Title: Re: JETSETS Post by LANCER on 01/22/14 at 16:18:01 6475645D515F5546475F5D340 wrote:
Packed and ready to go out tomorrows mail. |
|
Title: Re: JETSETS Post by wearsabrowncoat on 01/28/14 at 08:34:58 I finally got some downtime to install my jetset. I am doing some tank work so getting to the top of the carb and replacing the white spacer with the metal washers wasn't too hard. My question is what is the easiest way to change out the main jet on bottom. Am I wasting my time thinking about working with it in place or does the carb need to come off to properly switch the jets? |
|
Title: Re: JETSETS Post by verslagen1 on 01/28/14 at 08:54:02 May have to pry on the bat box a bit to drop the bowl. But can be done. Put a towel down over the engine in case you drop something. |
|
Title: Re: JETSETS Post by Dave on 01/28/14 at 09:09:03 706374756A6761636837060 wrote:
I can tell you from experience....that when a little screw falls down the front pulley cover, they are really hard to find! :o |
|
Title: Re: JETSETS Post by LANCER on 01/28/14 at 11:09:12 617265647B7670727926170 wrote:
What he said... ;) ;D |
|
Title: Re: JETSETS Post by wearsabrowncoat on 02/08/14 at 15:50:40 Spot on advice. It's like you've done it before. Even being aware of the hazard I still managed to drop 3 of the 4 carb screws - right on my shop rag. Thank you gentlemen. |
|
Title: Re: JETSETS Post by NJ Brit on 02/08/14 at 18:43:55 Do you still sell these? If so I'll Paypal you the money. Planning to switch out the muffler for a dyna and replace the filter with a K&N. Not sure what jet to use but looks like you have a good selection. |
|
Title: Re: JETSETS Post by LANCER on 02/09/14 at 02:17:33 797B232928110 wrote:
Yes, still sell JETSETS |
|
Title: Re: JETSETS Post by pgambr on 02/09/14 at 02:31:37 I'd like a set as well. Do you prefer pm or e-mail? Thanks. |
|
Title: Re: JETSETS Post by LANCER on 02/09/14 at 03:56:08 2730363A3525570 wrote:
Does not matter, either pm or em. Parts order going out this week, so should be available next week. |
|
Title: Re: JETSETS Post by Poguy11 on 02/09/14 at 06:30:12 Lancer,I,m in need of a jetset kit,please contact me at your convenience and let me know if my original email made it, Thanks |
|
Title: Re: JETSETS Post by LANCER on 02/10/14 at 01:56:59 66263824292F5E0 wrote:
OK, JETSET. I did not receive your email though. |
|
Title: Re: JETSETS Post by LANCER on 02/10/14 at 02:06:55 Poguy, pgambr, NJ Brit & anyone else needing JETSET's; Paypal $24.95 to savage.s40@gmail.com and the day the jets hit my door I will bag'm & hang'm on the post outside for the Pony Express Rider to pick up when he rides though on the next round. ** If anyone is outside the US let me know up front because the shipping cost requires extra $$. UPDATE: Wow, amazingly fast turn-a-round ... found Paypal confirmation for NJ Brit already and it's just been a few minutes since my last post. It's like a miracle ! ;D ;D ;D Got confirmation for Capt Ron as well ... don't know who he is from this site yet ... it's all good though, it works for me. ;D ;D |
|
Title: Re: JETSETS Post by Poguy11 on 02/10/14 at 04:38:33 Thanks Lancer,I'll get right on it |
|
Title: Re: JETSETS Post by Poguy11 on 02/10/14 at 04:56:02 Payment sent!..........I believe? |
|
Title: Re: JETSETS Post by LANCER on 02/10/14 at 05:18:43 65253B272A2C5D0 wrote:
Got it. |
|
Title: Re: JETSETS Post by paulmocan on 02/16/14 at 02:08:30 What would the cost be to ship to Romania? |
|
Title: Re: JETSETS Post by LANCER on 02/16/14 at 04:56:43 7362766F6E6C60626D030 wrote:
Looks like about $7 for First Class postage. The last one I sent to Norway took about 2 weeks for delivery. Paypal an even $32 for the JETSET & postage. |
|
Title: Re: JETSETS Post by walterpump on 02/17/14 at 16:15:02 Hi Lancer: What is the cost to ship to Ontario, Canada? Postal Code is K0K 3E0. I have a Dyna-Glide muffler going on my 2003 as soon as the weather warms up a little and I want to make the carb jetting changes that go with it. Thanks & have a great day. Jim |
|
Title: Re: JETSETS Post by LANCER on 02/18/14 at 04:22:00 4F59544C5D4A484D5548380 wrote:
$30 total for JETSET with shipping |
|
Title: Re: JETSETS Post by walterpump on 02/18/14 at 09:09:25 323F303D3B2C6C695E0 wrote:
$30 total for JETSET with shipping[/quote] Funds sent via PayPal Lancer. Thanks & have a great day. |
|
Title: Re: JETSETS Post by bobdog on 02/24/14 at 08:56:50 Did you get my pm ? |
|
Title: Re: JETSETS Post by LANCER on 02/24/14 at 09:14:06 2E2C292B2E1D0 wrote:
No, I missed it. Just went back and read it now. Will be looking for your letter in the mail. Since you are using a Supertrapp, the number of discs you use on the muffler for the sound level you LIKE will determine in large part what size main jet you end up needing. Besides changing sound level, the number of discs also changes the amount of air flow, and changing air flow affects fuel requirements; more air needs more fuel. |
|
Title: Re: JETSETS Post by walterpump on 02/24/14 at 13:16:00 $30 total for JETSET with shipping Funds sent via PayPal Lancer. Thanks & have a great day. Hey Lancer: Did you receive my PayPal payment for the carb jetset package? Thanks & have a great day. |
|
Title: Re: JETSETS Post by paulmocan on 02/28/14 at 04:09:10 I have one more question, Is the K&N filter RC-1250 good? I am working on changing the muffler, and removed the airbox. Do you, by any chance, have one? Could you ship it together with the jet kit? |
|
Title: Re: JETSETS Post by walterpump on 02/28/14 at 06:57:27 $30 total for JETSET with shipping Funds sent via PayPal Lancer. Thanks & have a great day. Hey Lancer: Did you receive my PayPal payment for the carb jetset package? Thanks & have a great day. Hi again Lancer. Sent funds to you via paypal for the jetset kit. Approximately three weeks ago. Have you recieved and funds and is the jetset on the way to me??? Thanks. |
|
Title: Re: JETSETS Post by LANCER on 02/28/14 at 15:25:43 24323F27362123263E23530 wrote:
Did it come under the name of James Mounk ? If so, I did get it. I have been delayed a bit. My last parts order arrived a couple of days ago but was short one of the jets and I'm trying to get those before shipping the JETSETS ? |
|
Title: Re: JETSETS Post by novicetinkerer on 03/02/14 at 17:21:45 Hey lancer I am interested in a jet set, I am too new to the forum to pm, I didn't see the details on how to purchase from you please let me know, also I saw an older post of yours that you were selling some Hard Krome pipes if you still have them I would like to buy them. Thank you. |
|
Title: Re: JETSETS Post by LANCER on 03/03/14 at 06:56:26 2F2335232E2E3170707371420 wrote:
Snow and iced in today but should be able to get out tomorrow to check if I have any H/K's. Will let you know then. |
|
Title: Re: JETSETS Post by novicetinkerer on 03/03/14 at 10:55:27 sorry about the inclement weather, thank you for the reply. |
|
Title: Re: JETSETS Post by Poguy11 on 03/03/14 at 19:50:01 Lancer,received jets sets today, now to get on that carb cleaning and raptor conversion.Thanks for providing such great service!!!! |
|
Title: Re: JETSETS Post by walterpump on 03/10/14 at 15:45:14 Did it come under the name of James Mounk ? If so, I did get it. I have been delayed a bit. My last parts order arrived a couple of days ago but was short one of the jets and I'm trying to get those before shipping the JETSETS ? Hey Lancer: The Jetset package arrived today. Thanks mucho amigo. Now to get that DynaGlide muffler on and the carb jets changed and lookout Spring:-) Take care. Jim |
|
Title: Re: JETSETS Post by Shocker on 03/16/14 at 17:04:23 Lancer, I'm in need of a jetset for my 07. Running a drag pipe and a cone filter. Stock jets just seem too lean. Please shoot me a PM with the particulars so I can get some money to ya. |
|
Title: Re: JETSETS Post by curmudgeon on 03/24/14 at 19:16:40 Sent PayPal funds today. I'm not sure if you check email more often than this thread, but please confirm receipt when you get a chance. Thanks! |
|
Title: Re: JETSETS Post by LANCER on 03/25/14 at 16:17:22 2D3B3C233B2A292B21204E0 wrote:
What was the email address that was used so I know which one you are. |
|
Title: Re: JETSETS Post by curmudgeon on 03/25/14 at 16:24:39 :) |
|
Title: Re: JETSETS Post by curmudgeon on 03/26/14 at 04:38:09 Saw the usps ship confirmation this morning. Thanks! |
|
Title: Re: JETSETS Post by paulmocan on 03/29/14 at 04:46:43 I made the payment a week or so ago. Did you receive it? Let me know when you have a chance. |
|
Title: Re: JETSETS Post by LANCER on 03/29/14 at 05:21:55 74657168696B67656A040 wrote:
Yes, I did. The package went out Wednesday, the 26th. |
|
Title: Re: JETSETS Post by Thomas Högberg on 04/12/14 at 01:23:15 Hi Lancer I am a newbie here, can´t send messages yet, so I try this :) Can you send me a jetset to Sweden? Do you have a idle mix screw for sale as well, mine vanished the ohter day? best regards /Thomas thomas.hogberg@telia.com |
|
Title: Re: JETSETS Post by LANCER on 04/14/14 at 13:22:32 6B4D5653464B5A3F0 wrote:
Yes, I can send to Sweden. Currently, I'm waiting on resupply again. I've been running out as soon as I get them in; some sizes are in very short supply from Japan. I MAY have a pilot screw...will have to check tomorrow at the barn shop. |
|
Title: Re: JETSETS Post by Thomas Högberg on 04/14/14 at 23:53:21 5558575A5C4B0B0E390 wrote:
Yes, I can send to Sweden. Currently, I'm waiting on resupply again. I've been running out as soon as I get them in; some sizes are in very short supply from Japan. I MAY have a pilot screw...will have to check tomorrow at the barn shop.[/quote] Thanks for your response, I might have found a supplier here in Sweden :) I will be in touch if it does not work out /Thomas |
|
Title: Re: JETSETS Post by nickythegreek on 04/21/14 at 18:18:53 PayPal sent. Now I hope I win this dyna eBay auction. |
|
Title: Re: JETSETS Post by nickthe_human on 05/03/14 at 11:05:45 Thanks! Sent a PM and payment Tuesday, jets were here Friday! Ready to do some jetting! |
|
Title: Re: JETSETS Post by oh_hi_bear on 05/20/14 at 22:51:08 Hi Lancer, I need jets size slightly different from your jet sets and a float bowl gasket. pilot #50 52.5 main #157.5 160 Can you PM me and let me know what you have and the price with shipping. I live in California. I am unable to PM you due to my lack of posts. Thanks. |
|
Title: Re: JETSETS Post by LANCER on 05/21/14 at 05:20:41 25222223282F2B384A0 wrote:
If you let me know right away, I can order the 157.5 main jet with my next order; should have it in about 10 days. Gaskets ? ? ? will just have to wait and see if they are available yet; stuff is getting hard to get. Yea, it's crazy. |
|
Title: Re: JETSETS Post by oh_hi_bear on 05/21/14 at 23:36:20 28252A2721367673440 wrote:
If you let me know right away, I can order the 157.5 main jet with my next order; should have it in about 10 days. Gaskets ? ? ? will just have to wait and see if they are available yet; stuff is getting hard to get. Yea, it's crazy.[/quote] I do want to order the 157.5 main jet. I already send the payment for the other 3 jets. Since the wait is only 10 days, I can wait for you to send them all in one package. Just let me know what is the additional cost and I will send the second payment. |
|
Title: Re: JETSETS Post by LANCER on 05/22/14 at 03:10:27 3C3B3B3A31363221530 wrote:
If you let me know right away, I can order the 157.5 main jet with my next order; should have it in about 10 days. Gaskets ? ? ? will just have to wait and see if they are available yet; stuff is getting hard to get. Yea, it's crazy.[/quote] I do want to order the 157.5 main jet. I already send the payment for the other 3 jets. Since the wait is only 10 days, I can wait for you to send them all in one package. Just let me know what is the additional cost and I will send the second payment.[/quote] Okie dokie, will do |
|
Title: Re: JETSETS Post by skiian on 06/02/14 at 09:10:36 I'd be interested in a set, but first can someone point me to a good guide on how to do this on a savage/S40? I've never re-jetted a carb so this should be quite the learning experience. The previous owner put a freer flowing exhaust on, and it's a little laggy/lurchy in the low RPM 10-20mph zone. It sounds like a jetting problem to me, do you agree? |
|
Title: Re: JETSETS Post by extraparts on 06/02/14 at 13:04:12 Hi, Lancer. I was wondering if you had a jet set put together or would have one soon. I wasn't sure if I should just Paypal you a fistfull of money and then wait by my mailbox or talk to you first. Also, with shipping to MN, the cost is just $24.95 total? Thanks in advance! |
|
Title: Re: JETSETS Post by extraparts on 06/02/14 at 13:07:42 Skiian, There is good info right here on the SuzukiSavage site. http://suzukisavage.com/cgi-bin/YaBB.pl?board=tech;action=display;num=1157720585 Or go here for a super helpful contents list of the whole site: http://suzukisavage.com/cgi-bin/YaBB.pl?num=1181745927 |
|
Title: Re: JETSETS Post by YoungSavage on 06/03/14 at 23:10:14 Lancer I was curious if you sold single jets instead of sets? I only need a 152.5 and 52.5 because my stock jets are from the 88 savage. |
|
Title: Re: JETSETS Post by zSavage on 06/09/14 at 10:59:56 hello, New owner here... and not much of a mechanic.... am able to do stuff just dont' know much... So i have this bike with straight pipe and stock air and carb..I bought it this way...It backfires a lot and I can ride it smooth with little backfire if i'm rela gentle on teh trottle... but just normal lots pops and pud backfires. Also when shut down most ofter i hear a loud puff or plop... hard to explain.. SO.... How do i figure out what kinda jets to replace to make it stop this? Also does carb come off each time i do this.... or can you get at it from bottom woiht out carb removal Thanks for your help if you have time... z- |
|
Title: Re: JETSETS Post by oh_hi_bear on 06/10/14 at 21:50:36 6E636C6167703035020 wrote:
If you let me know right away, I can order the 157.5 main jet with my next order; should have it in about 10 days. Gaskets ? ? ? will just have to wait and see if they are available yet; stuff is getting hard to get. Yea, it's crazy.[/quote] I do want to order the 157.5 main jet. I already send the payment for the other 3 jets. Since the wait is only 10 days, I can wait for you to send them all in one package. Just let me know what is the additional cost and I will send the second payment.[/quote] Okie dokie, will do[/quote] Have the 157.5 main jet arrive yet? |
|
Title: Re: JETSETS Post by LANCER on 06/14/14 at 05:12:31 676060616A6D697A080 wrote:
If you let me know right away, I can order the 157.5 main jet with my next order; should have it in about 10 days. Gaskets ? ? ? will just have to wait and see if they are available yet; stuff is getting hard to get. Yea, it's crazy.[/quote] I do want to order the 157.5 main jet. I already send the payment for the other 3 jets. Since the wait is only 10 days, I can wait for you to send them all in one package. Just let me know what is the additional cost and I will send the second payment.[/quote] Okie dokie, will do[/quote] Have the 157.5 main jet arrive yet?[/quote] Was ordering parts Thursday and checked on this; the 157.5 main jets are still on back order and expected to come in from Japan the first week of July. Yea. Crazy. |
|
Title: Re: JETSETS Post by LANCER on 06/14/14 at 05:43:47 567F4D5A4D4B492C0 wrote:
Howdy Z: If possible, you want to do away with that straight pipe. It is just real loud and hurts performance and makes tuning difficult. An older HD dyna is a good cheap replacement, or you can buy new mufflers for more $$$$; just be sure to get a good one so you are not wasting your money. The least expensive quality built mufflers I've found are from Cone Engineering. http://www.coneeng.com/pdf/motorcycle/MC%20finsihed%20Mufflers%20PDF.pdf In order to have a good smooth running engine that does not backfire you need to have a good muffler and an air-tight exhaust system. Any air leaks at all with cause back firing and frustrate the heck out of you as you try to tune the carb, which will just not act right at all as long as there is an air leak in the system. Fortunately, with just one cylinder to deal with we only have to ensure that the head-to-header, and header-to-muffler connections are air tight ... assuming that there are no other holes somewhere else that may be due to "rust-through" etc. Of course, you also need to have a good air intake filtering system. The stock air filter is good, but if you want to go with a pod type then be sure it is a good filter, is kept clean and sealed well to keep out crud. So; good muffler, good air-tight exhaust system, jet/tune carb to match intake & exhaust system. If you are in need of jets let me know. Currently I have them. |
|
Title: Re: JETSETS Post by LANCER on 06/14/14 at 05:47:15 6D5B415A53675542555351340 wrote:
Yes, I can do that. The 2 jets + shp + $12 for US addresses. Do you have washers for the needle ? No extra cost for those. |
|
Title: Re: JETSETS Post by Demin on 06/15/14 at 07:50:23 LANCER..Are the carbs all the same?I didn't recall my '86 having the white spacers.And according to Dynojet,their kits are for '00 and up.Older than that all the same then? |
|
Title: Re: JETSETS Post by LANCER on 06/16/14 at 03:56:33 25242C282F410 wrote:
Yep, basically all the same. The 80's models (some, if not all) had a needle with 3 notches in it so the clip could be adjusted rice/lean, but other than that consider them the same. The 80's models do have the white spacer like all the other models. When it comes to the LS650, with exception to some electrical items that Suzuki changed over the years, or the 4 to 5 speed change in the tranny, or the starter gear change they made, you can ignore any of the model year restrictions that may be listed by after market manufacturers. It just does not matter. |
|
Title: Re: JETSETS Post by RangerRide on 06/18/14 at 15:29:40 I'm ready for the jetset. First time using paypal. Do I just email you through paypal to savage.s40@gmail.com ? |
|
Title: Re: JETSETS Post by LANCER on 06/19/14 at 03:08:21 695A555C5E4969525F5E3B0 wrote:
Yep |
|
Title: Re: JETSETS Post by rapfohl on 07/01/14 at 15:12:18 Can I get a Jetset with a 145 main jet? Let me know, thanks! |
|
Title: Re: JETSETS Post by LANCER on 07/05/14 at 05:55:17 7A69786E676064080 wrote:
Sorry, I don't have any new 145 jets for the sets. There may be a used one somewhere but have not ran across one yet. |
|
Title: Re: JETSETS Post by oh_hi_bear on 08/02/14 at 22:00:13 626F606D6B7C3C390E0 wrote:
If you let me know right away, I can order the 157.5 main jet with my next order; should have it in about 10 days. Gaskets ? ? ? will just have to wait and see if they are available yet; stuff is getting hard to get. Yea, it's crazy.[/quote] I do want to order the 157.5 main jet. I already send the payment for the other 3 jets. Since the wait is only 10 days, I can wait for you to send them all in one package. Just let me know what is the additional cost and I will send the second payment.[/quote] Okie dokie, will do[/quote] Have the 157.5 main jet arrive yet?[/quote] Was ordering parts Thursday and checked on this; the 157.5 main jets are still on back order and expected to come in from Japan the first week of July. Yea. Crazy. [/quote] Did the shipment from Japan ever came? I have been itching to ride for a while now. |
|
Title: Re: JETSETS Post by LANCER on 08/04/14 at 18:03:42 3D3A3A3B30373320520 wrote:
If you let me know right away, I can order the 157.5 main jet with my next order; should have it in about 10 days. Gaskets ? ? ? will just have to wait and see if they are available yet; stuff is getting hard to get. Yea, it's crazy.[/quote] I do want to order the 157.5 main jet. I already send the payment for the other 3 jets. Since the wait is only 10 days, I can wait for you to send them all in one package. Just let me know what is the additional cost and I will send the second payment.[/quote] Okie dokie, will do[/quote] Have the 157.5 main jet arrive yet?[/quote] Was ordering parts Thursday and checked on this; the 157.5 main jets are still on back order and expected to come in from Japan the first week of July. Yea. Crazy. [/quote] Did the shipment from Japan ever came? I have been itching to ride for a while now.[/quote] NOPE, still have not received that jet. |
|
Title: Re: JETSETS Post by oh_hi_bear on 08/04/14 at 23:09:42 Dang that sucks. I guess I'll just get those other 3 jets first and see where my tuning takes me. |
|
Title: Re: JETSETS Post by Drow on 08/11/14 at 10:23:25 I need a jet set with gasket please. I have the '03 LS650. Not sure how to order them from you. I can't PM for some reason. Thank you. |
|
Title: Re: JETSETS Post by killeraxemannic on 08/11/14 at 13:49:33 Do you have a set still available? I am interested. |
|
Title: Re: JETSETS Post by killeraxemannic on 08/11/14 at 20:11:59 45736E766D68726E6F010 wrote:
Looks like you can't PM until you have 10 posts on the forum |
|
Title: Re: JETSETS Post by LANCER on 08/11/14 at 20:52:38 535154545D4A59405D55595656515B380 wrote:
Looks like you can't PM until you have 10 posts on the forum[/quote] You can Paypal $29.95 to "savage.s40@gmail.com" or I can send you an invoice to your email for credit/debit use. |
|
Title: Re: JETSETS Post by killeraxemannic on 08/11/14 at 21:10:11 333E313C3A2D6D685F0 wrote:
Looks like you can't PM until you have 10 posts on the forum[/quote] You can Paypal $29.95 to "savage.s40@gmail.com" or I can send you an invoice to your email for credit/debit use. [/quote] Paypal has been sent! Thanks! I have a 2005 S40 |
|
Title: Re: JETSETS Post by oh_hi_bear on 08/11/14 at 22:19:00 Hey Lancer, can you send me my 50 and 52.5 pilots and the 160 main jet. I already made the payment via paypal on 5/21/14. LMK if you need more information. I still cannot PM. |
|
Title: Re: JETSETS Post by LANCER on 08/12/14 at 03:45:00 373030313A3D392A580 wrote:
Was the payment done via Paypal ? If so, under what name and what is the transaction # ? You can email the info if you wish to savage.s40@gmail.com |
|
Title: Re: JETSETS Post by papare on 08/12/14 at 09:03:47 HEY Lance , can you suggest a jetset for me I have an 86 ls650 with a stock 155 main and 47.5 pilot but i just put a sportster muffler with tabs and a ryca (rm-0259) air filter , can you send me a paypal invoice (papare@optonline.net) thanks |
|
Title: Re: JETSETS Post by Drow on 08/12/14 at 15:53:49 I sent the funds and shipping information via PayPal. Thank you |
|
Title: Re: JETSETS Post by Drow on 08/12/14 at 15:56:56 BTW, if it matters...I am using the K&N cone filter and a Harley Dyna muffler at 500' above sea level. No additional engine mods. Thanks again. |
|
Title: Re: JETSETS Post by oh_hi_bear on 08/12/14 at 20:49:59 7B76797472652520170 wrote:
Was the payment done via Paypal ? If so, under what name and what is the transaction # ? You can email the info if you wish to savage.s40@gmail.com [/quote] email sent. |
|
Title: Re: JETSETS Post by Drow on 08/15/14 at 08:28:58 Lancer, Did you get my payment and shipping instructions via PAY PAL? |
|
Title: Re: JETSETS Post by LANCER on 08/15/14 at 14:55:07 093F223A21243E22234D0 wrote:
Are you in Eugene ? |
|
Title: Re: JETSETS Post by Drow on 08/16/14 at 11:32:25 Yes, I am in Eugene. |
|
Title: Re: JETSETS Post by LANCER on 08/16/14 at 12:34:00 4B7D607863667C60610F0 wrote:
Email sent |
|
Title: Re: JETSETS Post by killeraxemannic on 08/25/14 at 10:06:27 Got my jets installed along with the 3 washers for the white spacer. Bike runs absolutely great!!! Thanks! BTW for what it's worth the screws on top and inside the carb were no match for my DeWalt 12v max impact driver. It busted them loose with no problems or scaring or even a hint of stripping. If you have an impact gun that you can put a phillips bit on I highly recommend using it. |
|
Title: Re: JETSETS Post by LANCER on 08/25/14 at 12:14:49 242623232A3D2E372A222E2121262C4F0 wrote:
LOL Yep, on the power side I have a Sears Craftsman 19.2V lithium-ion powered impact driver that works quite nicely. I do use the little hand driver on the 2 tiny screws down inside of the slide though, in order to maintain more delicate control. ;) |
|
Title: Re: JETSETS Post by jasonsavage on 10/03/14 at 06:36:02 i take it these are still available? |
|
Title: Re: JETSETS Post by LANCER on 10/08/14 at 09:33:35 2D3F283F393B2C373A3B2C6868685E0 wrote:
Answered via PM |
|
Title: Re: JETSETS Post by Iceman4193 on 10/08/14 at 19:46:42 Hey are any of these still available? Who makes these Jets? Are they as good as dynojet or any of those other brands? Sorry I'm new to bikes. |
|
Title: Re: JETSETS Post by LANCER on 10/08/14 at 20:01:31 272D2B232F207A7F777D4E0 wrote:
The jets are Mikuni jets, same as the manufacturer of the carb. Are they as good as Dynojet ? As far as I could tell the jets that Dynojet makes seem to be of decent quality. However, the numbering system that Dynojet uses is different than the one that Mikuni uses and that makes it difficult when trying to jet/tune if you need to change from a Mikuni jet to a Dynojet jet, or visa-versa. Apples and oranges thing. For that reason alone I stick with Mikuni jets and keep life as simple as possible. |
|
Title: Re: JETSETS Post by Iceman4193 on 10/09/14 at 08:45:00 Awesome, do you still have a set available? |
|
Title: Re: JETSETS Post by LANCER on 10/09/14 at 19:06:23 656F69616D62383D353F0C0 wrote:
Yes, Paypal $29.95 to savage.s40@gmail.com and I will get them on the way. Shipping is included for US addresses. If you are outside the US then let me know where you are first because additional shipping cost will apply. |
|
Title: Re: JETSETS Post by Iceman4193 on 10/09/14 at 22:57:43 Quote:
I saw a shop near me also has a 6Sigma kit available. It has mostly the same stuff but it also has some Springs and needles as well. Are these things important at all or just extra junk? I don't want to have to keep moding my carb so I want to make sure I do what is best the first time around, I don't mean it as any offence. Also, if I didn't want the 14* and 150 mains would the price still be the same? I'm pretty sure I want to do a 52.5 pilot and 152.5 main. Thanks for your help |
|
Title: Re: JETSETS Post by Iceman4193 on 10/12/14 at 17:12:44 I sent the payment for the set. Can't pm yet not enough posts lol |
|
Title: Re: JETSETS Post by LANCER on 10/12/14 at 17:56:27 565C5A525E510B0E060C3F0 wrote:
Got it...will send it out tomorrow |
|
Title: Re: JETSETS Post by Iceman4193 on 10/22/14 at 15:29:24 363B34393F28686D5A0 wrote:
Got it...will send it out tomorrow [/quote] Hey which address did you send it to? I noticed I had 3 for some reason on my paypal. It wont let me delete the old ones for some reason but I hope it didnt go to the wrong one. |
|
Title: Re: JETSETS Post by LANCER on 10/22/14 at 19:34:46 0903050D010E54515953600 wrote:
Got it...will send it out tomorrow [/quote] Hey which address did you send it to? I noticed I had 3 for some reason on my paypal. It wont let me delete the old ones for some reason but I hope it didnt go to the wrong one.[/quote] Is this for Fernando in Nat. City ? or Kory in Daytona Beach ? And what is it about the "3" ? 3 what ? |
|
Title: Re: JETSETS Post by phatts27 on 10/23/14 at 06:27:19 Hey Lancer, I'm gonna need me one of those jet sets too. To the bank I go. I'll have payment through in a few hours Thanks, Ed :) |
|
Title: Re: JETSETS Post by Iceman4193 on 10/23/14 at 20:09:36 323F303D3B2C6C695E0 wrote:
Got it...will send it out tomorrow [/quote] Hey which address did you send it to? I noticed I had 3 for some reason on my paypal. It wont let me delete the old ones for some reason but I hope it didnt go to the wrong one.[/quote] Is this for Fernando in Nat. City ? or Kory in Daytona Beach ? And what is it about the "3" ? 3 what ? [/quote] Kory in Port Saint Lucy. I had 3 addresses on my paypal for some reason, 2 of which where old addresses. The Port Saint Lucy one should have been the primary but I didn't get the jets yet so maybe they where sent to one of the others? |
|
Title: Re: JETSETS Post by LANCER on 10/25/14 at 16:37:36 4A40464E424D17121A10230 wrote:
Got it...will send it out tomorrow [/quote] Hey which address did you send it to? I noticed I had 3 for some reason on my paypal. It wont let me delete the old ones for some reason but I hope it didnt go to the wrong one.[/quote] Is this for Fernando in Nat. City ? or Kory in Daytona Beach ? And what is it about the "3" ? 3 what ? [/quote] Kory in Port Saint Lucy. I had 3 addresses on my paypal for some reason, 2 of which where old addresses. The Port Saint Lucy one should have been the primary but I didn't get the jets yet so maybe they where sent to one of the others?[/quote] It was the 9th St address in Daytona that was on your Paypal and that is where the package went. Do you have "Forwarding" set up from that address to your current place ? |
|
Title: Re: JETSETS Post by phatts27 on 10/30/14 at 12:25:32 Thank you Lancer, the jet-set is here and complete. |
|
Title: Re: JETSETS Post by corey v84 on 10/31/14 at 12:44:07 Have any more jet seta available? ?? |
|
Title: Re: JETSETS Post by LANCER on 11/01/14 at 09:24:46 Temporarily out of stock for a few days; waiting on resupply which should be here the end of next week. |
|
Title: Re: JETSETS Post by corey v84 on 11/01/14 at 20:24:25 Ok thanks lancer, I want a set when they come in |
|
Title: Re: JETSETS Post by LANCER on 11/15/14 at 19:36:06 Just a reminder that due to continued increases in cost of parts throughout the year I've had to increase the cost of the JETSET to $29.95 in recent months. |
|
Title: Re: JETSETS Post by RobSutt on 01/06/15 at 19:05:52 Still selling these? And do they include the gasket? |
|
Title: Re: JETSETS Post by Sheriff41 on 02/17/15 at 21:53:49 Jetset order placed 17 Feb. Thanks! |
|
Title: Re: JETSETS Post by Sheriff41 on 02/23/15 at 18:44:35 Received the kit! Mahalo for the quick turnaround! Aloha! Sheriff [smiley=thumbsup.gif] |
|
Title: Re: JETSETS Post by LANCER on 02/24/15 at 05:49:30 053E33243F30306267560 wrote:
My pleasure man. My wife and I are saving for an anniversary trip to the island in a couple of years. It little change of pace from Oklahoma. YEP |
|
Title: Re: JETSETS Post by koehlerrk on 02/27/15 at 03:48:05 Sending you $29.95 right now. Send me a set to my PayPal address at your convenience. Too cold to work on the bike right now, but that will change in a couple weeks. Thank you! Rick |
|
Title: Re: JETSETS Post by LANCER on 02/27/15 at 04:30:12 393D373A3E37202039520 wrote:
Okie dokie |
|
Title: Re: JETSETS Post by koehlerrk on 03/02/15 at 18:39:03 Got mail from you today Lancer... they look great, many thanks! Made it worth the drive home today... two inches of slush and slop all over the roads. Yuck! C'mon Spring, get to New York soon... |
|
Title: Re: JETSETS Post by LANCER on 03/03/15 at 07:21:31 41454F42464F5858412A0 wrote:
Springs-a-comin ! |
|
Title: Re: JETSETS Post by Sheriff41 on 03/04/15 at 06:37:14 69646B6660773732050 wrote:
My pleasure man. My wife and I are saving for an anniversary trip to the island in a couple of years. It little change of pace from Oklahoma. YEP[/quote] It has probably changed a bit since you were here last. When you get around to heading out here let me know if you need any tips! Sheriff |
|
Title: Re: JETSETS Post by mhart731 on 03/08/15 at 04:41:46 Sent 29.95 today |
|
Title: Re: JETSETS Post by LANCER on 03/09/15 at 00:48:58 5550594A4C0F0B09380 wrote:
I got the Paypal confirmation of the payment but there is no shipping address info with it. |
|
Title: Re: JETSETS Post by mongo on 03/12/15 at 15:31:23 do you still have any jet kits left? thx |
|
Title: Re: JETSETS Post by LANCER on 03/13/15 at 07:53:00 4446474E461F1D290 wrote:
Yes I do. Need a set ? Or a dozen ? ;) |
|
Title: Re: JETSETS Post by LANCER on 03/14/15 at 04:05:28 4446474E461F1D290 wrote:
Yes I do, do you need som ? One set or a dozen or ? |
|
Title: Re: JETSETS Post by spearheadss on 03/16/15 at 13:45:42 Sent payment today. |
|
Title: Re: JETSETS Post by Flint on 03/23/15 at 18:13:20 Hi Lancer, I am planning on installing a Dyna muffler I bought, and opening up the air box a bit once my bike is broken in. I would like to order a jet set from you. What would be the procedure to do that in regards to ordering the jet set? Elevation is 2000' at home and at times when driving the max is 5000'. I would like to tune for around 3000'. Thanks |
|
Title: Re: JETSETS Post by LANCER on 03/24/15 at 05:58:53 1025313D325C0 wrote:
Just Paypal $29.95 to savage.s40@gmail.com or I can send you an invoice to your email if you wish to use a credit or debit account instead. It is still processed through the Paypal system either way for security. You don't need to punch holes in the air box, that is not a bottle neck for air flow. For your altitude you could start with a #50 pilot, #150 main jet, and just 2 washers on the needle. Set the pilot screw @ 1.5 turns out to begin and adjust as needed. The engine NEEDS to be FULLY warmed up...like after riding a few miles or idling for 10 minutes BEFORE tuning. See how it responds and go from there. |
|
Title: Re: JETSETS Post by Rylee on 03/30/15 at 23:19:07 Hey @Lancer I need a jet kit. Gonna paypal you now! |
|
Title: Re: JETSETS Post by LANCER on 03/31/15 at 06:50:26 387A60626B666B090 wrote:
OK ! |
|
Title: Re: JETSETS Post by Rylee on 04/04/15 at 23:04:26 Got my jet set today thanks @Lancer fast shipping! Can't wait to put them on. |
|
Title: Re: JETSETS Post by Kris01 on 04/17/15 at 15:51:23 I need some jets. Sent payment just now. Thanks Lancer! |
|
Title: Re: JETSETS Post by Mr.Wilson on 04/22/15 at 16:48:13 Sent 29.95 to your Paypal for Jetset. |
|
Title: Re: JETSETS Post by LANCER on 04/23/15 at 15:53:10 202E2D28223E2234470 wrote:
ok |
|
Title: Re: JETSETS Post by Wolfe on 05/11/15 at 21:14:52 Ready to send payment for jet set just want to make sure you have them in stock. |
|
Title: Re: JETSETS Post by Wolfe on 05/12/15 at 05:53:33 Payment sent through paypal. Please let me know when it ships thanks. |
|
Title: Re: JETSETS Post by LANCER on 05/12/15 at 06:05:44 657C7F3B7B606D6C3C30090 wrote:
Will do. |
|
Title: Re: JETSETS Post by Neilap on 05/12/15 at 20:49:45 How long does it usually take to receive these? Im in West Virginia |
|
Title: Re: JETSETS Post by LANCER on 05/13/15 at 06:36:18 466D61646978080 wrote:
You should have it by Friday or Saturday. |
|
Title: Re: JETSETS Post by alienbogey on 05/14/15 at 20:27:29 Lancer, Just sent PayPal payment for the jet set. Thanks. |
|
Title: Re: JETSETS Post by LANCER on 05/15/15 at 08:43:57 7C717478737F727A78641D0 wrote:
Got it ! Will send out today. I lived in Oak Harbor on Whidbey Island years ago. |
|
Title: Re: JETSETS Post by Text_14 on 05/31/15 at 22:27:55 Payment sent for Jetset! Thanks. |
|
Title: Re: JETSETS Post by LANCER on 05/31/15 at 22:36:05 59626B7D64596F6666790A0 wrote:
Okie dokie, If you are Chris from across the pond then I got it. If not, then we have an issue somewhere. Also, please note that the stock of #50 pilot jets is held up waiting for Mikuni Japan to deliver them to Mikuni America, and then to my supplier. It could be 2-3 more weeks yet. Hopefully when we get back from the Dragon Run they will be available. A note to everyone else too, is that I am out of all jets as of now. After shipping the to the dude above I will be out until further notice. |
|
Title: Re: JETSETS Post by LANCER on 05/31/15 at 22:59:47 Temporarily out of jets and it will be about 3 weeks before any more are available, after we get back from the Dragon Run. |
|
Title: Re: JETSETS Post by hushdaddy on 06/03/15 at 12:23:09 please let me know as soon as you have jet sets available. im getting ready to throw a new exhaust on and know im going to need to jet it. thanks. |
|
Title: Re: JETSETS Post by LANCER on 06/03/15 at 20:36:17 0A17110A060306061B620 wrote:
I found a set today, excepting the #50 pilot, if you want it now. |
|
Title: Re: JETSETS Post by hushdaddy on 06/04/15 at 08:06:02 yeah sure! I would really appreciate it. how much? |
|
Title: Re: JETSETS Post by Art Webb on 06/04/15 at 20:52:08 Aww shoot, I was gonna buy a set during the run Oh well, fcfs |
|
Title: Re: JETSETS Post by LANCER on 06/05/15 at 06:50:20 4A595F5C4E49492B0 wrote:
I still have a #52.5 pilot and #152.5 main jet that I will bring with me. If they can be helpful to you then you can just have them. |
|
Title: Re: JETSETS Post by Art Webb on 06/05/15 at 08:36:41 Well, they might, depending on what jets are in there now (i'm thinking it's the 45) thanks I'll grab some washers here |
|
Title: Re: JETSETS Post by hushdaddy on 06/23/15 at 13:27:02 got my set in yesterday! thanks again. I already installed my new muffler and its defiantly been needing to be re jetted. |
|
Title: Re: JETSETS Post by LANCER on 06/23/15 at 16:20:31 495452494540454558210 wrote:
You are welcome I have a few jets coming and will forward the #50 pilot if there are enough...I have quite a few folks waiting, some of them for 2 months. |
|
Title: Re: JETSETS Post by Canadian_kiwi on 06/23/15 at 23:34:25 Lancer do you deliver to New Zealand? I'm also trying to find a new air mixture screw any idea where I can get one? ;D |
|
Title: Re: JETSETS Post by LANCER on 06/24/15 at 08:48:21 6A4159565A5756510000380 wrote:
Yes I do and I can get them for you. I am on my way out right now but will look up whatever parts you may need and give you a price on them when I get back. |
|
Title: Re: JETSETS Post by Canadian_kiwi on 06/24/15 at 18:21:39 Thanks lancer just PM if easier :) |
|
Title: Re: JETSETS Post by webbrob on 06/24/15 at 20:13:44 Interested in a set, I know you are out right now. I am in the Navy and don't have reliable internet, I am not in a rush, can I send you the money now, and you just email me when you send it? |
|
Title: Re: JETSETS Post by LANCER on 06/25/15 at 07:24:43 15070000100D00620 wrote:
That's fine, you will be on the "short" waiting list. There are a few assorted jets coming now but not complete sets. There's almost enough #50 pilots to catch up with what I owe folks right now. I did get a fair number of gaskets though. Still waiting for the bigger supply to arrive. |
|
Title: Re: JETSETS Post by hushdaddy on 06/29/15 at 12:41:31 no worries, I don't think ill need the #50 so just get it to me when you can. if other people need it I can wait. like I said I don't think ill need it with my current set up. |
|
Title: Re: JETSETS Post by squiggy on 08/14/15 at 07:28:52 Interested as well when you get full sets put together. Not in a hurry by any means though. |
|
Title: Re: JETSETS Post by LANCER on 08/14/15 at 07:44:37 Jets are on the way; should have them by Monday. YEA !!! |
|
Title: Re: JETSETS Post by mastercarstech on 08/16/15 at 10:50:57 Hey Lancer! I have an 86 savage that I picked up in not running condition last summer and have been slowly rebuilding. My question is it came with a pod air filter and a screaming eagle muffler on it, it has the 155 main jet already which I think is stock for the 86 model year. As far as I can tell everything else is stock on it. I am switching the muffler out with a dyna unit. Do you think I will need to change the Jets for this set up? It seems the 155 is the biggest anyone uses on this bike but there are very few of the 86s left out here. :) I have never heard it run yet so I don't have a baseline on how it runs yet, hope to have it running in the next week or two. Just wanted to get the carb set up close before I put it on. Thanks for your help! ;D |
|
Title: Re: JETSETS Post by verslagen1 on 08/16/15 at 11:03:25 575B494E5F48595B48494E5F59523A0 wrote:
155 should be fine with a dyna muff. also depends on if it still has the center block in the muff. make sure your pod filter doesn't block the eyebrow inlet at the top of the carb. and you'd be better off with an inlet extension of at least 4" between the carb and filter. |
|
Title: Re: JETSETS Post by mastercarstech on 08/16/15 at 11:23:31 Ok great! I'll make up an intake for it. Should I be able to look down the muffler with a flashlight to see if the center is still there? If so how/should I remove it? Thanks again! |
|
Title: Re: JETSETS Post by verslagen1 on 08/16/15 at 11:48:30 2A2634332235242635343322242F470 wrote:
Leave it in, otherwise no need to change muff. |
|
Title: Re: JETSETS Post by mastercarstech on 08/16/15 at 15:24:38 Ok, next question, does it matter if I make the air intake longer than 4 inches? :-? |
|
Title: Re: JETSETS Post by springman on 09/06/15 at 19:21:42 Hello Lancer, Hope you are doing well. Also hope to see you at the 3 Twisted Sisters ride next year. Yes, let's all do it. ;D ;D ;D Well, I think I am ready to play with the carb. I have the 06 S40 on I which I put an HD muffler just before the Dragon ride. The motor seems to be running well but a couple of weeks ago I opened it, got to 80 and that was it. I've had it to 85 before with still some throttle available. Has stock air filter and I have not touched the carb. Has just over 18k miles on it. I want to go with a performance air filter (possibly K&N standard replacement or some pod air filter) and rejet fot best overall performance. What do you recommend for the jets and for the air filter? Thanks. |
|
Title: Re: JETSETS Post by LANCER on 09/07/15 at 07:41:54 595A5843444D474B442A0 wrote:
For a stock engine with K&N and an HD muffler, a 52.5 pilot and 152.5 main jet should work for you. When my '09 was stock, and with an HD and pod filter, I was running the 52.5/152.5 combo and it worked quite well. My pilot screw was set at about 2 1/2 turns out though. I could have swapped out the 52.5 for the 55 pilot jet and that would have brought the pilot screw setting down to about 1 3/4 turns out, but the end result would have been the same. I just never bothered to make the change until I removed the stock camshaft in favor of a Performance Camshaft. At that point it was needed and I did install a 55/155 set. By the way, I had also replaced the white spacer with the 3 washers back at the beginning. |
|
Title: Re: JETSETS Post by springman on 09/07/15 at 20:43:30 Thanks Lancer. I'm sure you have the price and payment instructions in here but I really am not the best at navigating the web site. Please let me know how much and how to send it to you as I think I will try to do some major maintenance (check valves, change spark plug, maybe change petcock, K&N air filter, etc) on the bike soon and might as well get it all done at the same time. Thanks for the help. I really do appreciate it. |
|
Title: Re: JETSETS Post by LANCER on 09/08/15 at 11:26:37 2625273C3B3238343B550 wrote:
Okie dokie, no problem. The JETSET is $29.95, and you can send it vial Paypal to savage.s40@gmail.com If you do not have a Paypal account or just want to use a credit/debit card I can send you an invoice; it is quick and easy to use. It is my pleasure to help. If you need anything else or have any questions just holler. Michael |
|
Title: Re: JETSETS Post by springman on 09/08/15 at 20:17:21 OK, here you go. This is me the man of the house speaking. I was going to pay with credit card but my wife says I should get a paypal account. So I will attempt to figure out how to get a paypal account and will then send you the money. And they say men rule the world. :( |
|
Title: Re: JETSETS Post by Canadian_kiwi on 09/09/15 at 03:47:08 Hey lancer I'm only looking for a air mix screw as I've stripped mine... Shops here want a fortune. I have 06 s40 Any chance you could help me out need shipping go New Zealand ;D Pm me if easier Thanks |
|
Title: Re: JETSETS Post by LANCER on 09/09/15 at 06:42:21 2D2E2C373039333F305E0 wrote:
Yeah ... ok ... uh ha ... I see how it is there ! ;D It is all processed through Paypal either way, but it is good to keep peace in the house. Let me know when you are ready. |
|
Title: Re: JETSETS Post by LANCER on 09/09/15 at 06:44:39 6B4058575B5657500101390 wrote:
I will be ordering parts later today and will include the pilot screw in the order. I will let you know when it comes in and the total with shipping. |
|
Title: Re: JETSETS Post by Canadian_kiwi on 09/09/15 at 12:38:11 5459565B5D4A0A0F380 wrote:
I will be ordering parts later today and will include the pilot screw in the order. I will let you know when it comes in and the total with shipping.[/quote] Thanks lancer! :) :) |
|
Title: Re: JETSETS Post by springman on 09/09/15 at 14:18:30 Oh yeah! I feel liberated! ;D |
|
Title: Re: JETSETS Post by LANCER on 09/09/15 at 14:21:00 292A2833343D373B345A0 wrote:
I proclaim you LIBERATED |
|
Title: Re: JETSETS Post by springman on 09/09/15 at 14:51:01 And it feels so good! |
|
Title: Re: JETSETS Post by Ryan Craft on 09/10/15 at 06:22:23 Hey there! I have a 1998 Suzuki savage Ls 650. I am in the process of bobbing it out right now. I also bought the fishtail exhaust to go to a straight pipe set up. Now what is your recommendation for everything with re-jetting with sizes and all? The carb is stock to me knowledge. |
|
Title: Re: JETSETS Post by springman on 09/10/15 at 11:46:16 I am almost scared to ask this after having just read oldfeller'e post regarding his dirty air filter. But here goes. The K&N air filter for the air box is around $60, Emgo pod air filter is around $10-12, and the Uni 2 stage foam pod filter is around $18. Which of the less expensive options would provide the best overall performance boost with the rejetting of the carb? Also Ramair and Uni both sell the filter media that I could adapt to an old filter frame. I put an HD muffler on the bike just recently but the carburetor remains untouched. What say you, Savages???? |
|
Title: Re: JETSETS Post by Tiktok423 on 09/10/15 at 17:27:25 Hey Lancer, How much in total for jet set Kit, with postage to New Zealand please? do I need to private message you when placing orders or do i just pay via PayPal and you will automatically receive payment and shipping details. Cheers. |
|
Title: Re: JETSETS Post by LANCER on 09/11/15 at 05:45:43 5B6A797E6C61212B180 wrote:
I've never personally used a fishtail muffler, but it is my understanding that they offer a fairly decent amount of back pressure. That said, start with the standard 52.5 pilot & 152.5 main jet, with the 3 washers in place of the white spacer, and the pilot screw set at 1.5 turns out. This is a typical basic setup and it is a pretty good starting point. |
|
Title: Re: JETSETS Post by LANCER on 09/11/15 at 05:47:43 2F2C2E35323B313D325C0 wrote:
The Uni pod foam filter is your best choice for the least $$. |
|
Title: Re: JETSETS Post by Ryan Craft on 09/11/15 at 06:49:01 303D323F392E6E6B5C0 wrote:
I've never personally used a fishtail muffler, but it is my understanding that they offer a fairly decent amount of back pressure. That said, start with the standard 52.5 pilot & 152.5 main jet, with the 3 washers in place of the white spacer, and the pilot screw set at 1.5 turns out. This is a typical basic setup and it is a pretty good starting point. [/quote] Actually it's not a muffler it's a straight pipe so I'm assuming that would change things! |
|
Title: Re: JETSETS Post by LANCER on 09/11/15 at 07:59:35 07362522303D7D77440 wrote:
I've never personally used a fishtail muffler, but it is my understanding that they offer a fairly decent amount of back pressure. That said, start with the standard 52.5 pilot & 152.5 main jet, with the 3 washers in place of the white spacer, and the pilot screw set at 1.5 turns out. This is a typical basic setup and it is a pretty good starting point. [/quote] Actually it's not a muffler it's a straight pipe so I'm assuming that would change things! [/quote] When you said "fishtail exhaust" I assumed you meant it was a muffler. If it is all just a straight pipe then it DOES change things. You will be hard pressed to get the jetting/tuning sorted out with a straight pipe. A straight pipe is basically just a setup for high speed running, tuning wise. It just does not tune well. You can get some quality mufflers that are pretty slim & trim and still be able to jet & tune them. But this is your build, and if you really want a straight pipe just be aware of the jetting/tuning difficulties you will encounter. That said, I would still start with the 52.5/152.5+3 combo. The straight pipe is essentially an extended header, and total length makes a difference. You will find most headers are about30- 32" in length. There is a reason for that. Adding that same amount in a straight pipe would probably yield your best result. 3/4 or 1/2 of that amount would be your next best bet. Just something to think about. |
|
Title: Re: JETSETS Post by springman on 09/11/15 at 10:01:54 Thanks for the advice on the Uni pod air filter. It's off to eBay or Amazon we go. |
|
Title: Re: JETSETS Post by LANCER on 09/11/15 at 12:17:10 5053514A4D444E424D230 wrote:
You can get the Uni from Thunder Products, that's where I get the UFO's, Dial-a-jets, etc. Lonn is the owner and Anne is his wife; they are really good folks. He has it priced at 19.95 www.thunderproducts.com |
|
Title: Re: JETSETS Post by Volpstar on 09/12/15 at 13:00:48 Hey Lancer. This is a late response, but thanks again for the jet set and the quick mailing of the backed up #50 pilot jet. I just wanted to let you know, if you weren't already aware, that the gasket you mailed out wasn't cut correctly. The hole for the small brass tube to stick through was slightly off; meaning the gasket wouldn't fit properly. If the tube was slipped through the hole, the gasket was diagonal. If the gasket was placed properly, the tube wasn't even close to making it into the hole. Other than that, everything was perfect. Not a big issue, I just cut more space on the hole to fit the tube and things worked out fine. No obstructions or important areas not sealed. Obviously I can't say if this was an issue unique to myself; but still something I thought you might want to be aware of. |
|
Title: Re: JETSETS Post by springman on 09/12/15 at 22:34:11 Thanks for the additional info Lancer. |
|
Title: Re: JETSETS Post by LANCER on 09/14/15 at 12:37:53 645D5E4241465340320 wrote:
I have had 2 others tell me they had a fitment issue as well, except that theirs was just slightly off for the tube hole; just half a hole space over. After the first one I checked my gaskets against the carb bodies I have and they fit mine. It's weird, there is only one part number for all of the model years in my parts catalog. |
|
Title: Re: JETSETS Post by springman on 09/22/15 at 19:35:04 Jet set received today. Thanks. I guess now I have to figure out just how to do this. ;D |
|
Title: Re: JETSETS Post by LANCER on 09/23/15 at 07:05:05 484B4952555C565A553B0 wrote:
It is not difficult; but if you need help let me know. |
|
Title: Re: JETSETS Post by springman on 09/23/15 at 11:32:14 Thanks. Sounds good, I appreciate the offer. I will not be able to get to it this weekend so I will try to read up on it with what is in the forum and plan on doing it the following weekend. I'll let you know how it turns out. |
|
Title: Re: JETSETS Post by Zonablazer on 11/12/15 at 07:38:02 Lancer, do you still have some sets available? |
|
Title: Re: JETSETS Post by LANCER on 11/13/15 at 07:22:00 526766696A6469726D7A080 wrote:
Yes I do. |
|
Title: Re: JETSETS Post by Badger on 11/25/15 at 19:31:37 Lancer, how much for a jet kit to New Zealand? |
|
Title: Re: JETSETS Post by LANCER on 11/26/15 at 06:09:34 6A494C4F4D5A280 wrote:
It's $28.50 for USPS Priority, 6-10 business days or $7.10 USPS First Class, 12-15 business days +/- Most I have sent to NZ have arrived in 1.5-2 weeks |
|
Title: Re: JETSETS Post by Zonablazer on 11/26/15 at 10:49:34 Does it include the gasket? |
|
Title: Re: JETSETS Post by LANCER on 11/26/15 at 12:37:34 7A4F4E41424C415A4552200 wrote:
YEP |
|
Title: Re: JETSETS Post by Zonablazer on 11/27/15 at 16:09:51 Payment and PM sent for a set. |
|
Title: Re: JETSETS Post by Badger on 11/27/15 at 20:51:11 Payment sent. Thanks in advance. I have a feeling that there will be a big order coming your way during our winter :) I have a need to play, can't leave an engine alone! |
|
Title: Re: JETSETS Post by LANCER on 11/28/15 at 03:29:17 Okie dokie, got both of you guys [ch128077][ch127995] |
|
Title: Re: JETSETS Post by Steve6 on 11/30/15 at 19:43:44 I have on 06 s40, just did Oldfeller's intake filter and am preparing to install a Ryca Vintage Reverse Cone Shorty. Would like to order the JETSETS, can you let me know how much with shipping to MO, also what quicker shipping would be and your thoughts on starting with the 52.5/152.5 setup with a setup that is that open? Cheers, Steve |
|
Title: Re: JETSETS Post by LANCER on 12/01/15 at 03:22:06 4A58515A0C0C390 wrote:
The $29.95 price includes shipping within the U.S. It usually only takes 3 days to arrive from the time I send it so there is no point in spending the money to try to get it there faster. For a starting point with the filter and RYCA muffler, you can go with the 52.5/152.5 combo or bump it to 55/155, which is a bit closer to what you may need. When I jetted my stock S40 I started with 52.5/152.5 and had the pilot screw ended up at 2 1/2-2 3/4 turns out and the 152.5 worked just fine for it. I did change it a couple of years later to 55/155 and the pilot screw setting was about 2 turns out and there was no noticeable performance improvement on the top end. The midrange was set up with the 3 washers in place of the white spacer on the needle, and that did not change. Other than the muffler and jet/tuning change, this was a totally stock engine. I had it up to 105 indicated on the speedo on several occasions. This particular engine is a bit stronger than your average LS650 engine. |
|
Title: Re: JETSETS Post by Steve6 on 12/02/15 at 05:12:26 Payment sent, Thanks. |
|
Title: Re: JETSETS Post by LANCER on 12/03/15 at 07:16:42 41535A510707320 wrote:
Its on the way. You should have received an email via Paypal with the tracking info. |
|
Title: Re: JETSETS Post by Badger on 12/07/15 at 00:03:27 Jet set arrived today, good work that man. Same time as new muffler turned up, time to play. |
|
Title: Re: JETSETS Post by LANCER on 12/07/15 at 02:23:09 4A696C6F6D7A080 wrote:
Well ok then !!! [ch128515] |
|
Title: Re: JETSETS Post by webbrob on 01/20/16 at 21:53:40 Do you still have some of these kits? If so how much with shipping to San Diego, CA 92108? |
|
Title: Re: JETSETS Post by Anegative on 03/17/16 at 18:54:34 will this fit on my 2012 boulevard s40? and how do i order them? |
|
Title: Re: JETSETS Post by Anegative on 03/17/16 at 19:04:32 Ok so im computer illeterate. how do i go about ordering a jetset? |
|
Title: Re: JETSETS Post by DesertRat on 03/24/16 at 19:54:09 4A47484543541411260 wrote:
http://images1.snapfish.com/232323232%7Ffp93232%3Euqcshlukaxroqdfv36973%3Enu%3D323%3A%3E639%3E697%3EWSNRCG%3D3753%3A25834339nu0mrj Can I get a complete set, please. I'm at 1,117 feet (340 m) elevation, advice for a good starting point with the jet set would be cool too ;) |
|
Title: Re: JETSETS Post by LANCER on 03/25/16 at 04:17:19 293B3C3C2C313C5E0 wrote:
Yes, $29.95 to your door ! ;) |
|
Title: Re: JETSETS Post by LANCER on 03/25/16 at 04:19:55 725D565452475A4556330 wrote:
Yes, they fit all model years. You can send via Paypal to "savage.s40@gmail.com" If you do not have Paypal yet I can send you an invoice with which you can use a credit or debit card. If you want to do that then I need your email address. |
|
Title: Re: JETSETS Post by DesertRat on 03/25/16 at 15:24:39 Paypal Payment sent, I'm at 1,117 feet (340 m) elevation, advice for a good starting point with the jet set. |
|
Title: Re: JETSETS Post by LANCER on 03/26/16 at 05:22:13 0F2E382E393F192A3F4B0 wrote:
If you are Anthony, I need a shipping address. There was not one on the Paypal transaction. |
|
Title: Re: JETSETS Post by DesertRat on 03/26/16 at 07:37:16 5F525D5056410104330 wrote:
I need a shipping address. There was not one on the Paypal transaction.[/quote] weird, it showed up on my transaction receipt. PM SENT |
|
Title: Re: JETSETS Post by DesertRat on 03/30/16 at 15:01:00 Got 'em Lancer, Thank you ... for the tips too :D |
|
Title: Re: JETSETS Post by LANCER on 03/30/16 at 16:52:25 557462746365437065110 wrote:
You are welcome. |
|
Title: Re: JETSETS Post by bearbones on 03/31/16 at 09:01:19 Sent payment via paypal. Let me know its all good. Thanks |
|
Title: Re: JETSETS Post by LANCER on 03/31/16 at 09:13:02 686F6B786865646F790A0 wrote:
Got Paypal confirmation; will be on the way in the morning |
|
Title: Re: JETSETS Post by oram on 04/10/16 at 15:31:37 Hi Lancer, I sent payment via paypal for the kit. Please let me know if everything looks good. |
|
Title: Re: JETSETS Post by JRUTS on 05/01/16 at 16:52:28 Would definitely like to order a set if you have any left.. paypal ready ! Let me know! |
|
Title: Re: JETSETS Post by LANCER on 05/01/16 at 18:05:45 656E646A7C7D7A7B7C7B6A66610F0 wrote:
Yep, just send $29.95 to savage.s40@gmail.com, or if you need an invoice give me your email address. You can process it with a credit or debit account. |
|
Title: Re: JETSETS Post by JRUTS on 05/01/16 at 18:30:34 All set ! Thanks again. |
|
Title: Re: JETSETS Post by cisco on 05/09/16 at 09:25:13 Hello im new to this forum, will be posting pics soon. I will also be needing a set of jets for my bobber project ;D |
|
Title: Re: JETSETS Post by AceofShades on 05/11/16 at 22:26:32 Paypal Sent |
|
Title: Re: JETSETS Post by LANCER on 05/12/16 at 07:15:33 020812020E565152610 wrote:
The JETSET's are $29.95 and you can Paypal to savage.s40@gmail.com If you do not have a Paypal account then give me an email address and I can send you an invoice for using credit/debit. |
|
Title: Re: JETSETS Post by LANCER on 05/12/16 at 07:16:42 6D4F49434A7F444D48495F2C0 wrote:
Got it and your jets are on the way |
|
Title: Re: JETSETS Post by mastercarstech on 06/15/16 at 16:24:29 PayPal sent for a jetset. Thanks! :D |
|
Title: Re: JETSETS Post by LANCER on 06/16/16 at 15:55:50 727E6C6B7A6D7C7E6D6C6B7A7C771F0 wrote:
Got it |
|
Title: Re: JETSETS Post by Beachpea on 06/17/16 at 19:39:56 I have a 2009 S40 with K&N air filter and Harley Dyna muffler (with non-removable baffles). I need the necessary jetset in the appropriate sizes for this configuration. Can you help? As a newcomer, I am not yet eligible for PM's, so please reply here. Many thanks, Beachpea |
|
Title: Re: JETSETS Post by LANCER on 06/18/16 at 03:32:03 36377F6A6E7F606B0F0 wrote:
If you have a Paypal account just send $29.95 to savage.s40@gmail.com If you don't have an account, or just want an invoice, give me your email address and I will send you an invoice with which you can use a credit/debit card, OR ... if you want to just send a money order then send to: Michael Eslick 32810 S 265 Rd Henryetta, OK 74437 Please insure that your full name and address are included on what ever choice you make. |
|
Title: Re: JETSETS Post by mastercarstech on 06/22/16 at 07:19:31 Got em Monday Lancer. Thanks! |
|
Title: Re: JETSETS Post by Doom on 06/22/16 at 16:03:53 Id like to order a set if you still have some left. |
|
Title: Re: JETSETS Post by LANCER on 06/23/16 at 17:56:47 4F6464660B0 wrote:
Yep, I do. Paypal to savage.s40@gmail.com or I can send you an invoice for credit/debit use. |
|
Title: Re: JETSETS Post by Doom on 06/23/16 at 19:12:21 Payment sent, thank you in advance! |
|
Title: Re: JETSETS Post by jblaine on 06/28/16 at 12:58:59 Payment just sent for Jetsets. Looking forward to installing. Thanks in advance! |
|
Title: Re: JETSETS Post by krsanky on 08/14/16 at 05:58:50 Hi Lancer, I paypaled you for a jetset. My shipping should be in there, it was from paul@oldcode.org ... thx |
|
Title: Re: JETSETS Post by LANCER on 08/14/16 at 18:57:43 465F5E4C4346542D0 wrote:
okie dokie |
|
Title: Re: JETSETS Post by Redryder652 on 11/17/16 at 03:21:52 Hey Lancer, I just PayPal'd you 29.95 for a jetset, my address should be there, if it It is not, pm me and I'll give it to you. |
|
Title: Re: JETSETS Post by JDNewYork on 12/07/16 at 05:31:03 Hi Lancer, new to the forum, new to riding, new to my Savage (bought 3 weeks ago). Have been slowly giving her some TLC (oil and filter change, air filter, brake fluids and pads etc.). Just replaced the stock muffler with a Jardine and from what I understand, despite it running OK rejetting should bring out optimum performance. 2 questions, first are you still able to provide the JETSET parts to do the rejet? and second...if you have any advice on what combination of jets would be best used with this muffler? Savage is a 1999. All help would be greatly appreciated and if you are able to still supply the parts I will be PayPal'ing you the dough immediately. |
|
Title: Re: JETSETS Post by LANCER on 12/07/16 at 19:14:17 7B757F5446685E435A310 wrote:
The engine is jetted lean from the factory and with a Jardine it will be even leaner. Some folks with a Jardine have a #52.5 pilot and others #55, and for main jets most seem to use the #155, though a few #152.5. I suggest the #52.5 pilot and #155 main jet. Also, you should replace the white plastic spacer on the needle with the 3 washers in the JETSET. THe price is $29.95 including shipping and you can PayPal to savage.s40@gmail.com. |
|
Title: Re: JETSETS Post by JDNewYork on 12/08/16 at 05:41:36 Just sent the cash via PayPal Lancer, thanks so much for the advice. |
|
Title: Re: JETSETS Post by JDNewYork on 12/13/16 at 10:40:48 just received the parts Lancer, thanks so much. |
|
Title: Re: JETSETS Post by MShipley on 12/15/16 at 06:16:20 Sent $$ via pay pal about a week ago for jet set. |
|
Title: Re: JETSETS Post by LANCER on 12/15/16 at 17:34:14 5B457E7F667A736F160 wrote:
It is packed and ready to go out in tomorrows mail. You should have it by Monday. USPS TRACKING # 9400109699938027158589 |
|
Title: Re: JETSETS Post by 09S40X on 03/25/17 at 17:49:54 Looking to purchase a jet set I can send PayPal asap |
|
Title: Re: JETSETS Post by LANCER on 03/25/17 at 20:30:36 1F167C1B1F772F0 wrote:
Hi JETSET is $29.95, PayPal to savage.s40@gmail.com Do you want 1, 5 or 10 ? ;D |
|
Title: Re: JETSETS Post by Tpot on 04/12/17 at 10:59:52 Just sent the Paypal payment the email address is t.potter2013@gmail.com. Do you know when it might be here? |
|
Title: Re: JETSETS Post by LANCER on 04/12/17 at 11:09:08 496F7C6B746E6D726969786F1D0 wrote:
It will go out in the morning so might be there Sat., but by Monday for sure. |
|
Title: Re: JETSETS Post by Tpot on 04/15/17 at 06:24:28 How do I tell which jet is which? |
|
Title: Re: JETSETS Post by verslagen1 on 04/15/17 at 07:54:22 the pilot is shaped differently than the main and there's a number on each one. |
|
Title: Re: JETSETS Post by Tpot on 04/15/17 at 11:15:44 The numbers on the main jet don't say if its a 150 or 152.5 |
|
Title: Re: JETSETS Post by LANCER on 04/15/17 at 12:03:16 The number on the main jet is on the big flat face, with the screw driver slot. It is not unusual for the numbers to be hard to see, they are not always stamped in real well. The use of a magnifier is needed at times. Oh yea. ;D I use a X10 jewelers magnifier. The pilot jet is on the side of the shaft and just under the threads. You will need to rotate the jet slightly when reading the numbers. Older carbs had 47.7 pilot and 155 main jets. Newer carbs had 52.5 pilot and 145 main jets. Of course California, being squirrelly, has different sets; 47.5 pilot and 125 main jets. You may find some with other jets if previous owners have messed with them. You may even find some strange looking and numbered jets if a previous owner put in a set of jets from a Dynojet kit. |
|
Title: Re: JETSETS Post by TheNaughtyLemur on 04/17/17 at 11:17:47 I just sent some for you. Let me know if my shipping address didn't go through. |
|
Title: Re: JETSETS Post by LANCER on 04/17/17 at 15:58:00 407C715A7561737C606D5871796166140 wrote:
Thank you; got it and your address is there. Will go out tomorrow. |
|
Title: Re: JETSETS Post by snackwrap on 04/18/17 at 17:41:42 Hey Lancer, I just PayPal'd you 29.95 for a jetset, my address should be there, if it is not, pm me and I'll give it to you. Email address is from nnc7948@rit.edu. |
|
Title: Re: JETSETS Post by koehlerrk on 04/20/17 at 09:17:12 Lancer, sending you money via Paypal for a jet set. My handle here is the first half of my email address. Rick |
|
Title: Re: JETSETS Post by snackwrap on 04/22/17 at 12:33:38 3F222D2F273B3E2D3C4C0 wrote:
Got my parts Lancer, Thanks so much!! |
|
Title: Re: JETSETS Post by camper2099 on 04/27/17 at 21:08:48 Hi Lancer. If you currently have the jet sets in stock, I would like to purchase one. Let me know, thanks. |
|
Title: Re: JETSETS Post by LANCER on 04/28/17 at 07:34:34 292B273A2F38787A73734A0 wrote:
Yes I do. You can PayPal $29.95 to savage.s40@gmail.com for a set. |
|
Title: Re: JETSETS Post by camper2099 on 04/28/17 at 08:06:59 424F404D4B5C1C192E0 wrote:
Yes I do. You can PayPal $29.95 to savage.s40@gmail.com for a set.[/quote] Awesome. I just paid via PayPal. Thanks |
|
Title: Re: JETSETS Post by Blueberet on 04/28/17 at 15:35:24 Hi LANCER, I'm new to the Forum as I recently bought stock -92 savage :) Will tune it up with bcb kit, cone air filter and slashcut muffler without silencer. What kind of jets would you recommend and will you ship to Finland? - Joni |
|
Title: Re: JETSETS Post by GreasyJonny on 05/11/17 at 05:53:03 PayPal'd you last night. What would you recommend for an 04 with oldfeller intake mod, and the new mac 2" header and reverse cone muffler at 900' ? Thanks |
|
Title: Re: JETSETS Post by LANCER on 05/11/17 at 07:13:09 45706763717B486D6C6C7B020 wrote:
Start with 52.5 pilot & 152.5 main jets. I have a newly installed MAC system on my '09 as well but due to electrical issues have not been able to test ride it so do not have specific recommendations yet. |
|
Title: Re: JETSETS Post by swing69 on 05/13/17 at 08:46:25 Hey Lancer....PP sent for a jet set! thanks!! Mike |
|
Title: Re: JETSETS Post by LANCER on 05/14/17 at 04:23:58 40445A5D54050A330 wrote:
Okie dokie Waiting for resupply of jets; will ship as soon as I get them. Michael |
|
Title: Re: JETSETS Post by Jarhead-CO on 05/14/17 at 13:10:53 0C010E0305125257600 wrote:
Okie dokie Waiting for resupply of jets; will ship as soon as I get them. Michael[/quote] Let me know when you get the jets in imma order a set. |
|
Title: Re: JETSETS Post by LANCER on 05/14/17 at 13:20:03 714554464648501B1A230 wrote:
Okie dokie Waiting for resupply of jets; will ship as soon as I get them. Michael[/quote] Let me know when you get the jets in imma order a set.[/quote] [ch128077] |
|
Title: Re: JETSETS Post by bobabot1 on 05/18/17 at 18:52:25 Just sent paypal money for a jetset (I understand it might be a minute before you get stock again). Email is my username. Please PM me if my address didn't come through. Thanks! |
|
Title: Re: JETSETS Post by mmoses on 06/29/17 at 21:09:36 Do you have more Jet sets in stock? |
|
Title: Re: JETSETS Post by LANCER on 06/30/17 at 09:21:00 7272706C7A6C1F0 wrote:
I have a few sets. PayPal $29.95 to savage.s40@gmail.com |
|
Title: Re: JETSETS Post by 2nosabes on 07/08/17 at 21:04:57 I got my kit!! It makes a world of difference ;D Awesome member to deal with! I highly recommend! |
|
Title: Re: JETSETS Post by mmoses on 07/09/17 at 09:23:59 7C717E7375622227100 wrote:
I have a few sets. PayPal $29.95 to savage.s40@gmail.com[/quote] Money sent Martin |
|
Title: Re: JETSETS Post by mmoses on 07/13/17 at 11:22:48 Lancer, Did you get the paypal money sent? I cant send a PM yet. please confirm |
|
Title: Re: JETSETS Post by metalbrian45 on 07/18/17 at 10:50:45 Do you have this kit available at this time? I am prepared to order if so. |
|
Title: Re: JETSETS Post by LANCER on 07/19/17 at 04:17:04 2A2233262B25352E26297372470 wrote:
Yes I do, PayPal to savage.s40@gmail.com |
|
Title: Re: JETSETS Post by metalbrian45 on 07/19/17 at 06:02:39 Thanks! I got your email response and payment is sent! |
|
Title: Re: JETSETS Post by LANCER on 07/19/17 at 16:57:46 787061747977677C747B2120150 wrote:
Your JETSET went out today. |
|
Title: Re: JETSETS Post by Armen on 07/24/17 at 12:02:58 So, stocker with a Dyna muffler (helping someone out). What's a good guess for the jet sizes? thanks |
|
Title: Re: JETSETS Post by LANCER on 07/24/17 at 14:12:36 0D3E2129224C0 wrote:
Typically, 52.5 pilot & 152.5 main, with 3 washers replacing the white spacer. That works for quite a few. Some may run 50/150 with 2 washers, and also combinations thereof. It is a mixed bag though and good tuning technique is required to make it sing. [ch128565] [ch127949] [ch128526] [ch128641] [ch128565] |
|
Title: Re: JETSETS Post by providencemg on 07/24/17 at 20:58:42 2001 stock savage with sportster muffler. idles but dies upon acceleration. Should a Jet set fix this problem??? If so, do you have any available? will order immediately. Suggestion on sizes? Thanks JD |
|
Title: Re: JETSETS Post by LANCER on 07/25/17 at 03:10:44 3F3D2039262B2A212C2A22284F0 wrote:
For a stocker with a sporty muffler you will likely need 52.5 pilot & 152.5 main jet, and 3 washers in place of the white spacer. Then tune for highest rpm at idle with the pilot screw. As for the issue you are dealing with now, the engine dieing on acceleration. You did not say what jets are in the carb now. This problem could be because a previous owner put some crazy jets in the carb, or more likely is that there is some crud blocking one or more of the tiny passageways in the carb. I would pull the carb and totally disassemble and clean everything, making sure each and every passageway is clear. Some are so tiny that they are hard to see. The smallest is in the bowl, it is the little brass tube hangine down from the carb body. There is a hole in the very end and 2 more, one on each side. Then there are 4 on the sides of the needle jet. There are several in the carb body itself. They must be clean. Use lots of carb cleaner and some very small/tiny wires to insure they flow. |
|
Title: Re: JETSETS Post by providencemg on 07/25/17 at 11:46:42 Hello Lancer, Thank you for the info. Email sent. JD |
|
Title: Re: JETSETS Post by providencemg on 07/26/17 at 08:50:01 Lancer, PayPal sent |
|
Title: Re: JETSETS Post by LANCER on 07/26/17 at 10:25:07 262439203F32333835333B31560 wrote:
Got ya covered |
|
Title: Re: JETSETS Post by Sosacj21 on 08/04/17 at 17:22:53 Is there any way to do express shipping? And if so how much? |
|
Title: Re: JETSETS Post by Sosacj21 on 08/04/17 at 19:24:14 PayPal Sent |
|
Title: Re: JETSETS Post by LANCER on 08/07/17 at 09:36:50 1E223E2C2E277F7C4D0 wrote:
I got your payment and the package is already shipped. It is coming USPS First Class but with you being in MO. I believe, you may have it day after tomorrow, and certainly by Thurs. |
|
Title: Re: JETSETS Post by SoC on 08/07/17 at 10:10:54 Lancer, just sent you an email about getting a Jet Set. Hope you have one. Thanks. |
|
Title: Re: JETSETS Post by SoC on 08/07/17 at 16:36:14 Lancer, payment sent from Paypal for 1 Jet Set. |
|
Title: Re: JETSETS Post by LANCER on 08/08/17 at 11:34:29 5554514340434C51494B220 wrote:
Yep, got it. Packed and ready to go. ;) |
|
Title: Re: JETSETS Post by kawazacky on 09/14/17 at 13:41:23 Sent an email re: jet kit. |
|
Title: Re: JETSETS Post by Mnheights on 01/05/18 at 22:55:02 3C313E3335226267500 wrote:
I am looking to get this |
|
Title: Re: JETSETS Post by LANCER on 01/06/18 at 04:12:58 11323439353B34282F5C0 wrote:
I am looking to get this [/quote] OK, you can process a Paypal payment as noted above, or if you need to do payment another way let me know and we can make arrangements. |
|
Title: Re: JETSETS Post by Castheandra on 02/01/18 at 13:31:13 Hi Lancer!! I'm newer to the forum & couldn't private msg but I'm looking to get a jet set off you! I'm in Ottawa, Ontario though- how much extra should I include for shipping??? Thanks!!! |
|
Title: Re: JETSETS Post by LANCER on 02/01/18 at 14:10:59 072537370C2B312021440 wrote:
Add $12 to the $29.95 price for the set, so $41.95 total. That is for First Class shipping. If you want Priority it is $25 extra. |
|
Title: Re: JETSETS Post by DarthUnicorn on 02/10/18 at 12:33:57 Sending payment now for a kit! Thanks for offering these! |
|
Title: Re: JETSETS Post by LANCER on 02/12/18 at 06:06:58 0421323428152E29232F322E400 wrote:
It is on the way today. I use to live in SC, the Columbia area; Little Mountain and Lexington. We will be coming back at some point though, to live in either Lexington or Myrtle Beach. :) |
|
Title: Re: JETSETS Post by Castheandra on 02/13/18 at 06:28:40 Payment sent for jetset to Ottawa :) Thanks so much!!!!! |
|
Title: Re: JETSETS Post by Castheandra on 02/21/18 at 12:33:32 I just Sent my address via email Lancer...thanks for the heads up! |
|
Title: Re: JETSETS Post by Christof13T on 02/22/18 at 17:57:57 Just ordered my set! Looking forward to a happier Savage! |
|
Title: Re: JETSETS Post by LANCER on 02/23/18 at 11:58:46 All JETSET's are on the way for ya'll. |
|
Title: Re: JETSETS Post by LTLRed556 on 02/23/18 at 23:19:58 Appreciate all the advice across the forum man! Super happy to be getting a kit! |
|
Title: Re: JETSETS Post by Transp0rt3r on 02/24/18 at 08:59:21 Payment has been sent! Thank you for your advice as well- very helpful for Suzuki newbies like me |
|
Title: Re: JETSETS Post by Transp0rt3r on 03/05/18 at 19:36:11 Got my jets today!!! 8-) Woo hoo. Also, got Zinc additive, Rotella T6 oil and filter. Time to get busy in the garage before spring is back. Thank you Lancer! |
|
Title: Re: JETSETS Post by LANCER on 03/06/18 at 06:41:04 My pleasure |
|
Title: Re: JETSETS Post by mz250 on 03/10/18 at 20:57:25 How much would postage be to Australia NSW 2287 Thanks |
|
Title: Re: JETSETS Post by LANCER on 03/21/18 at 07:06:21 62753D3A3F0F0 wrote:
Sorry for the delay, I missed seeing your post before today. shipping costs to Australia: $15 for USPS First Class (about 2 weeks) $37 for USPS Priority (5-10 days) plus $29.95 for the JETSET |
|
Title: Re: JETSETS Post by Pratik Tailor on 03/21/18 at 10:56:41 Hello Lancer, Do you still have that jet set. I would like to get one. Thanks. |
|
Title: Re: JETSETS Post by LANCER on 03/22/18 at 04:50:20 121003160B0916030B0E0D10525253620 wrote:
Yes, if you get it in today I will drop it in the mail before leaving for SC. PAYPAL TO savage.s40@gmail.com. $29.95 |
|
Title: Re: JETSETS Post by Pratik Tailor on 03/22/18 at 05:28:21 Hello, Payment sent on paypal. Address is there in notes. If you need anything else please let me know. Thank You. |
|
Title: Re: JETSETS Post by Pratik Tailor on 03/22/18 at 11:54:16 Hello Lancer, Can you confirm you got my payment, also I am at 80 ft elevation with stock bike and emgo turnout muffler. Can you tell me which jet i should use. Thanks in advance. |
|
Title: Re: JETSETS Post by LANCER on 03/22/18 at 19:31:51 525043564B4956434B4E4D50121213220 wrote:
Yep, got it. thank you. The package is in the box waiting for the mailman tomorrow. You should have it by Monday at the latest. If your engine is stock and with a stock muffler, then go with the 52.5 pilot and 150 main. If a stock engine and a Dyna/Sportster muffler or something similar then use a 152.5 main jet. Set your pilot screw at 1.5 turns out to begin with and tune from there to find the highest rpm, then adjust with the idle screw for 1100 rpm idle speed. Be sure the engine is completely warm when adjusting the pilot screw, which requires a ride of a couple of miles to get it really warmed up. Many folks like to reduce the idle rpm down to about 900 or so before adjusting the pilot screw, which makes it easier to hear the increase in rpm. Of course, if you have a tack then that makes it easier. |
|
Title: Re: JETSETS Post by Pratik Tailor on 03/23/18 at 04:33:18 I have emgo turn out muffler and that is near to open. What you will suggest for that. Thank You. |
|
Title: Re: JETSETS Post by LANCER on 03/24/18 at 14:54:46 3D3F2C392426392C2421223F7D7D7C4D0 wrote:
A good slightly used HD Dyna/Sportster muffler will work MUCH better for you than the Emgo, they are next to worthless in my opinion. I've had a couple of them and tried to make them work with extra packing and assorted baffles but it was an exercise in frustration. That's been my experience with them anyway. The HD's are plentifull and cheap and just work well. If you are interested in other types I like Cone Engineering a lot. They make all stainless in a variety of shapes and sizes, with assorted baffle choices and priced from $120-160. Virtually any other quality brand name will run $250-400. Take a look at their website. |
|
Title: Re: JETSETS Post by Pratik Tailor on 03/26/18 at 15:18:53 I got jet set buddy thanks for that. Second thing will this muffler work for my bike? "Harley Davidson Stock Sportster xl-883/1200 Muffler Exhaust 65894-95". If yes let me know i am getting it for $35. |
|
Title: Re: JETSETS Post by Pratik Tailor on 03/26/18 at 15:32:21 Or if you have muffler for sale how much it will be. I am looking for something loud, hd muffler will be loud enough? |
|
Title: Re: JETSETS Post by LANCER on 03/26/18 at 17:45:40 636172677A7867727A7F7C61232322130 wrote:
That should work just fine. The only muffler I have for sale right now is a Hard Krome muffler I picked up a while back. It is loud and has a really long pipe section on the front end, being made originally for one of the big HD's. It has really good chrome. The pipe section is a good 3' long so it can be cut to any desired length. It has the typical 1.75" ID in the pipe. I think shipping cost would be in the $30-40 range, maybe less if you wanted the pipe portion cut down before shipping. The price I would want is $100 + shipping. I have some photos at home I can send but that will not be until Apr. 8 when we get back home. |
|
Title: Re: JETSETS Post by onetruck on 04/13/18 at 10:53:11 Do you still have Jets and gaskets to sell. |
|
Title: Re: JETSETS Post by LANCER on 04/14/18 at 18:40:43 3474756E7B6772030 wrote:
Yep, need a dozen or two ? ;D ;D Paypal $30 for each one you want, but I must draw the line at 999.....to savage.s40@gmail.com 8-) |
|
Title: Re: JETSETS Post by onetruck on 04/16/18 at 11:57:17 If you send to Canada I will take a set. Let me know the cost and I will Pay Pal you. I live in Ontario Canada. Thanks. |
|
Title: Re: JETSETS Post by LANCER on 04/17/18 at 08:32:55 6424253E2B3722530 wrote:
Make it $40 even (total for JETSET & ship) They sure charge a lot for just jumping over a line. |
|
Title: Re: JETSETS Post by onetruck on 04/17/18 at 10:14:46 Better a line than a wall. I have to up my post count to send a pm but its coming. |
|
Title: Re: JETSETS Post by onetruck on 04/17/18 at 10:15:34 Soon. |
|
Title: Re: JETSETS Post by onetruck on 04/17/18 at 10:16:45 Pretty good deal actually. I just priced jets individually and I was |
|
Title: Re: JETSETS Post by onetruck on 04/17/18 at 10:17:50 Shocked what they wanted around here. |
|
Title: Re: JETSETS Post by onetruck on 04/17/18 at 10:21:49 I just paid over Forty bucks Canadian for a raptor petcock. The parts dummy I talked with told me the part # I have was wrong. His partner behind the counter took over and proved him wrong. PM coming. |
|
Title: Re: JETSETS Post by Frank_Cobain on 04/27/18 at 10:13:51 hello my name is frank I'm new to the forum and can't figure out how to post so I figured id ask a question through a post I'm trying to get a jet kit from 6 sigma jets but I don't know what stage I need I have a Jardine slash cut slip on pipe and I'm going to get a k&n air filter |
|
Title: Re: JETSETS Post by LANCER on 04/28/18 at 21:15:56 A Jardine supplies little to no back pressure so a lot of air will be going out the exhaust, and a K&N will contribute a bit too. You will probably be looking at a #55 pilot and a 155 main jet being needed, and should consider filing the white spacer on the jet needle in half or just replace it with some washers. Then readjust the pilot screw and reset the idle speed screw. |
|
Title: Re: JETSETS Post by madmikesmech on 05/10/18 at 18:02:21 Just sent a paypal to LANCER for a jet set! Cant wait!! What a good guy LANCER seems to be very good at comunicating, always willing to share his knowledge. Thank you Sir! Mike |
|
Title: Re: JETSETS Post by LANCER on 05/10/18 at 21:14:27 5C50555C585A54425C545259310 wrote:
Yep, got the Paypal |
|
Title: Re: JETSETS Post by madmikesmech on 05/11/18 at 09:07:59 [ch128077] |
|
Title: Re: JETSETS Post by T140V on 05/17/18 at 08:27:50 I sent you you a payment through PayPal Lancer. I also emailed my info to you. :) |
|
Title: Re: JETSETS Post by LANCER on 05/17/18 at 08:42:07 0164616503550 wrote:
Thanks Will be home late Sat. |
|
Title: Re: JETSETS Post by T140V on 05/17/18 at 09:46:00 No problem I have othe bikes I can ride right now. I have a gas overflow problem so I figured I'll reject at the same time. Thanks |
|
Title: Re: JETSETS Post by T140V on 05/27/18 at 01:38:24 Thanks for the jet set Lancer. I'll be working on that bike soon. :) :) |
|
Title: Re: JETSETS Post by LANCER on 05/27/18 at 02:01:14 6005000462340 wrote:
;) 8-) |
|
Title: Re: JETSETS Post by SavageMerlacot on 06/12/18 at 18:55:43 I just sent LANCER a payment for a Jet Set via PayPal. The bike is running fine, but who doesn't want more power, especially with a passenger?? Thanks a bunch!! |
|
Title: Re: JETSETS Post by LANCER on 06/13/18 at 07:02:38 5B7364757A775B73647A77757962160 wrote:
Got it ! |
|
Title: Re: JETSETS Post by SavageMerlacot on 06/13/18 at 17:28:09 Thanks so much!!! I've now got a full saturday of bike work planned: Sissy install, seat lift, white spacer mod, carb jetting and tuning, and frame the ramp that will eventually launch me over the 10 school buses I plan to jump! |
|
Title: Re: JETSETS Post by Testure on 06/13/18 at 19:40:01 Payment sent through PayPal for a Jetset. Thanks, Lancer! |
|
Title: Re: JETSETS Post by chrischrischris on 07/14/18 at 08:14:27 Hey Lancer can you PM me, I'm about to become an owner of a 2016 s40 and wanted to get one of your rejet kits. Im based in Sydney, Australia, how much will it be all up? I will be operating the bike near the coast at sea level and have a few extra questions. Do you do sell cone filters that will fit without the need to do any fabrication or move the battery box? or can you recommend one? If I keep the stock air filter/box and stock exhaust what jet / spacer setup do you recommend to start with? If i keep the stock exhaust but replace the airbox with a cone filter, what jet / spacer setup do you recommend to start with? Im not sure what the initial setup of the jets will be but im fairly certain there is a plastic tube inside the large spring that is also fitted within the carb which acts as a throttle limiter for learners / emission control that ill have to remove, ill keep you posted when i find out. Thanks Chris |
|
Title: Re: JETSETS Post by Banzai310 on 07/24/18 at 08:48:26 Jetset requested please. PayPal sent. Thanks! |
|
Title: Re: JETSETS Post by LANCER on 07/24/18 at 08:56:40 082B24302B23797B7A4A0 wrote:
Okie dokie |
|
Title: Re: JETSETS Post by 12BS on 08/03/18 at 05:57:26 Recieved the Jet set. Thanks for the quick turnaround. |
|
Title: Re: JETSETS Post by LANCER on 08/03/18 at 08:05:59 292A5A4B180 wrote:
[ch128521] |
|
Title: Re: JETSETS Post by Savage Terry on 08/11/18 at 16:50:14 Lancer, do you still have float bowl gaskets? I also need an o-ring that fits around the needle and seat. I can pay thru PayPal. Thanks Terry |
|
Title: Re: JETSETS Post by Big Al on 01/09/19 at 10:36:28 Hello Lancer, first post here but I've been lurking for a long time, just learning as much as possible. I have a bone stock 2009 S40 with 3,200 miles on it. I just got in a spotless Harley Dyna muffler and I'm planning on picking up a K&N replacement filter. I'm located 1,500 feet above sea level. What jet combination would you recommend for this setup? I'm not wanting to do anything wild, just get the engine breathing properly the way it should be instead of the lean stock setup. I can bounce you out a Paypal payment ASAP! |
|
Title: Re: JETSETS Post by LANCER on 01/10/19 at 04:56:26 777A7370622422160 wrote:
Start with #50 pilot and #150 main jets wih 3 washers in place of the white spacer on the needle. You need to run your bike for a few miles before final tuning to insure it is completely warm. $30 for the JETSET, includes shipping I also have a set of stainless Allen Head screws for the stock carb 4 top, 4 bottom & 3 for the tiny triangular cover on the right side. Regular $15 but just $10 if added to the JETSET. Michael |
|
Title: Re: JETSETS Post by Big Al on 01/15/19 at 12:21:54 Payment just sent out for the JETSET and screw set! Thank you! -AL- |
|
Title: Re: JETSETS Post by LANCER on 01/15/19 at 22:56:29 7C71787B692F291D0 wrote:
It’s on the way. My pleasure |
|
Title: Re: JETSETS Post by Yoshi on 01/16/19 at 03:57:34 Paypal sent for a set |
|
Title: Re: JETSETS Post by LANCER on 01/16/19 at 12:50:48 5E4F5E676B656F7C7D65670E0 wrote:
Okie dokie |
|
Title: Re: JETSETS Post by Big Al on 01/21/19 at 07:55:25 Got my kit in, man that was fast! Thank you! |
|
Title: Re: JETSETS Post by LANCER on 01/21/19 at 11:41:42 303D3437256365510 wrote:
[ch128521][ch128077] |
|
Title: Re: JETSETS Post by JMazd6 on 01/25/19 at 13:27:04 Payment sent from Douglas Schuelke! What is the recommendation to start with for stock 99 with a HD muffler? In phoenix AZ elevation around 1000ft to 1300ft. Also does it matter what HD muffler? Just the mounting is different right? Thanks |
|
Title: Re: JETSETS Post by joeyt on 02/03/19 at 14:42:01 Hello Mr. Lancer. I'd like to purchase a jet set, gasket, and possibly screw set from you to correct the lean status of my new to me '96. I'd have PM'd you, but I'm new here. :) How much would you recommend the screws? I've seen people complain about the ones on the carb. And what would my total be? Thank you! |
|
Title: Re: JETSETS Post by LANCER on 02/04/19 at 16:55:30 2D28223E33470 wrote:
Howdy The JETSET is $30 and it does include the floatbowl gasket. The Screw Set is all stainless steel, cost is $15 if purchased separately or if with the JETSET is just $10. So total for both is just $40, and shipping is included if within the US. For international shipping the cost is more of course and determined by the country of destination. |
|
Title: Re: JETSETS Post by joeyt on 02/04/19 at 18:22:27 Fantastic! $40 from Joey sent to you. I appreciate it. Would you have a recommendation where to start with a Ryca flat pod filter, and a freer flowing exhaust? Still looking into what exhaust specifically, but it will be a cheaper shorty exhaust off of amazon or ebay, or even stock exhaust for now. In LA, so my elevation is between 300-800ft depending what part of the valley I'm in. |
|
Title: Re: JETSETS Post by LANCER on 02/05/19 at 04:47:09 25202A363B4F0 wrote:
With an all stock engine start with the #50 pilot and #150 main jet, 2 washers in place of the white spacer. Be careful when removing the 2 tiny screws in the slide to remove the white spacer. They are typically pretty tight and can be striped, so get a real good fitting screwdriver and tap with a hammer to loses them. I use a small impact driver with the slide mounted on a vice with the needle of the slide between the jaws and holding it gently. This gives a good solid base to work on and makes the removal a bit easier. If you have an old desktop computer box some of the tiny screws inside can be used to replace the softer stock screws holding the needle. They are made of much better metal and don’t get torn up. I think the little filter in the RYCA kit is too small for our engine if you want it to run best. I think they choose it because it fit the space better for their purpose. It is “ok” but not the best. I like the Uni filter, it performs best of other types, is very cost effective, being foam it is easier to install and will conform to the space, and has two layers with the outside layer being removable. Cost is $20 compared to $50 for a K&N pod. I use a Cone Engineering muffler on my Savage, REX. They are all stainless steel, assorted shapes, sizes, choice of baffling or none, and cost an average of $150. Just some thoughts to consider now or later. |
|
Title: Re: JETSETS Post by joeyt on 02/05/19 at 05:25:53 That's all sound advice. I was actually considering a pk92(?) Uni filter, but wasnt sure if the slightly smaller flange would be detrimental. I appreciate your help greatly, sir. |
|
Title: Re: JETSETS Post by LANCER on 02/05/19 at 06:28:26 3C39332F22560 wrote:
If the pk92 has the correct inside diameter on the flange it will work. The stock carb has a 57mm OD on the filter side to fit a 57mm ID flange on the filter. I just don't have those in stock, I carry the 63mm ID filters for the VM carbs. |
|
Title: Re: JETSETS Post by Mechaniac on 02/10/19 at 18:07:38 I just wanted to give a recommendation for Lancer's jet kit. I recently sent messages back and forth with him and he put together a re-jet kit along with a Dial-A-Jet kit for my wife's Savage. I installed it about a month ago but with the colder weather I've had only a few trips with these parts. Well the bike fires right up without nearly as much choke and I can actually completely remove the choke after a couple minutes or a mile. Before it seemed I had to leave the choke on forever to keep it running right. Power has gone up a noticeable amount. Throttle response is instant and smooth. The first time I went full throttle and shifted into 2nd gear the tire bounced up off the road as I let out the clutch and reopened the throttle! I don't know if it would do that before because I never tried but I wasn't trying that time either. I didn't understand what all the "need" was for steeper gearing but after the jetting I kept looking for another gear on the highway as the engine just wanted to pull up without being forced. I can't tell you about mileage because the bike hasn't been used long enough to establish a baseline but it runs like a champ. Thanks for a great product. Vernon |
|
Title: Re: JETSETS Post by LANCER on 02/11/19 at 07:33:46 Good news ! Have you had opportunity to fine tune a little ? |
|
Title: Re: JETSETS Post by Mechaniac on 02/11/19 at 10:10:31 When I had it on the bench the float was factory set way high so I adjusted it to spec. The clear fuel supply hose on the Dial-A-Jet allows for level checking at any time and it's now right below the gasket level. I had the idle screw 2.5 turns out and it started and ran but once I got time to get it hot it needed about another 3/4 turn to get perfect. I haven't tried adjusting the Dial-A-Jet yet, if it improves much I'll be shocked and pleased. Runs really nice and strong. Vernon |
|
Title: Re: JETSETS Post by LANCER on 02/11/19 at 12:41:31 60484E454C43444C4E2D0 wrote:
At 2.5 turns out the pilot ideally needs to go up one size already, but since you said it needed to go out 3/4 more that would call for another step up one more size. So 2 total & set the pilot screw back to 1.5 turns out and start the tune process again. Get the low & mid range dialed in before adjusting the high range with the DAJ. It will save time and effort. |
|
Title: Re: JETSETS Post by vandaman on 03/04/19 at 16:24:17 If like a jet set and gasket can you send me invoice at PayPal csyburke121@yahoo.com. |
|
Title: Re: JETSETS Post by LANCER on 03/06/19 at 06:51:47 32252A202529252A440 wrote:
Will do; also answered by PM. |
|
Title: Re: JETSETS Post by LiftdT4R on 03/11/19 at 08:29:56 Paypal sent for jet and screw kit, thanks!! |
|
Title: Re: JETSETS Post by LANCER on 03/12/19 at 03:00:10 1E3B342636066600520 wrote:
Okie dokie ! |
|
Title: Re: JETSETS Post by LiftdT4R on 03/15/19 at 07:03:28 Do you sell the UNI filters for the stock carb with the Ryca kit? Or, do you know which model will work? |
|
Title: Re: JETSETS Post by Old Savage Eddie on 03/17/19 at 03:55:56 Hello Lancer, Do you have any jetsets currently available? I wanted to put an order in. |
|
Title: Re: JETSETS Post by LANCER on 03/19/19 at 09:48:47 5978787579531C0 wrote:
Yes, I do. You can PayPal $30 to Savage.s40@gmail.com or I can send an invoice to your email for Paypal, credit or debit use. |
|
Title: Re: JETSETS Post by Old Savage Eddie on 03/21/19 at 02:32:55 Thanks Lancer, I sent you the order!! Cant wait to start playing with my jets ;D |
|
Title: Re: JETSETS Post by LANCER on 03/21/19 at 11:17:54 6647474A466C230 wrote:
Yep, got it ! |
|
Title: Re: JETSETS Post by Mister.X on 04/23/19 at 20:22:28 Hi, Do you send international (Australia)? If so how much extra for postage. Thanks. |
|
Title: Re: JETSETS Post by LANCER on 04/24/19 at 06:19:53 795D474051461A6C340 wrote:
Mr X I presume ? :)) First Class USPS will add $15 to the cost, $30+ $15 = $45 Takes about 10-14 days. If you want it any quicker then $37 is the least and that will take 5-10 days. What do you want to do ? Michael Lancer |
|
Title: Re: JETSETS Post by Pswartz on 04/24/19 at 11:02:29 Paypal sent for the JETSET and Screw kit. Many thanks! |
|
Title: Re: JETSETS Post by Mister.X on 04/24/19 at 11:31:04 Mister.x or Adrian. I've purchased a dyna muffler and thought it'd be smart to rejet so it doesn't lean out, I think it already needs a bit more fuel. 110m above sea level if that makes a difference too. |
|
Title: Re: JETSETS Post by rangeshooter on 05/12/19 at 10:41:18 Hi, I would like to order the JETSET and screw set. My bike is stock but will be changing to Dyna exhaust. I am in Maryland and the elevation ranges from 50 ft around the eastern county's to 2000 feet in the mountains my area where a lot of my riding will probable ride is around 800to 900 ft.Do you have any ideas on wich jets may work well . Will more than likely use the stock air box. Thanks, Rangeshooter |
|
Title: Re: JETSETS Post by LANCER on 05/14/19 at 04:00:43 5E4D424B495F44434358495E2C0 wrote:
Just sent ou my last set but more ordered. It will take a week to get them and a few days additional shipping to you. You can PayPal $30 to Savage.s40@gmail.com or I can send you an invoice to your email. |
|
Title: Re: JETSETS Post by MidLifeRider on 05/21/19 at 14:12:12 Would like to order jetset, bowl gasket and extra screws. All available? Thanks In Virginia, at sea level. Adding Dyna muffler with stock air box and Raptor petcock. |
|
Title: Re: JETSETS Post by LANCER on 05/25/19 at 12:48:08 52544A52544A52544A484E210 wrote:
Yes they are still available but it will be a little while, waiting on resupply. Payment of $40 for the Jet/screw set combo can be made to Savage.s40@gmail.com via PayPal, or I can send an invoice to your email. |
|
Title: Re: JETSETS Post by MidLifeRider on 05/25/19 at 16:09:35 Payment sent through PayPal. Thanks |
|
Title: Re: JETSETS Post by MidLifeRider on 06/07/19 at 13:18:40 Received jetset today. Much quicker than expected. Thanks! |
|
Title: Re: JETSETS Post by LANCER on 06/07/19 at 14:33:50 2F29372F29372F293735335C0 wrote:
My pleasure. |
|
Title: Re: JETSETS Post by Cspartan1291 on 06/08/19 at 20:53:33 Do you still have any available? i put a Dyna Muffler with a Cone filter, I'm located in North Jersey. |
|
Title: Re: JETSETS Post by LANCER on 06/09/19 at 02:59:42 033330213234212E71727971400 wrote:
I do. $30 via PayPal to Savage.s40@gmail.com or I can send you an invoice to your email. |
|
Title: Re: JETSETS Post by Cspartan1291 on 06/09/19 at 09:51:09 616C636E687F3F3A0D0 wrote:
Awesome! i just sent the payment through paypal! |
|
Title: Re: JETSETS Post by LANCER on 06/09/19 at 16:23:59 48787B6A797F6A653A39323A0B0 wrote:
Awesome! i just sent the payment through paypal! [/quote] Got it,should have it on the way in the morning. |
|
Title: Re: JETSETS Post by SoMoJo on 06/14/19 at 20:04:33 Lancer: Interested in getting one of your JetSets. Just got a 04 LS650 and want to do an exhaust mod (possibly to one of the HD exhausts I keep seeing mention of). I'm in southern MO (after moving over here from Eastern OK a couple years back). Joni (SoMoJo) |
|
Title: Re: JETSETS Post by LANCER on 06/15/19 at 03:35:11 092C2D2A002B22317676430 wrote:
Howdy Joni I'm in Henryetta OK, south of Tulsa on I-40. Where were you ? For a JETSET you can make payment on Paypal, and made to savage.s40@gmail.com, or I can send an invoice to your email for credit/debit use. $30 includes shipping to US addresses. Michael |
|
Title: Re: JETSETS Post by SoMoJo on 06/15/19 at 04:13:09 We were in Wagoner originally, then moved up to Afton. Husband just sent off PayPal payment, you will see Douglas (w5ga). I'm a VERY new Savage owner still working on my 1st 10 forum posts so I can PM. Thanks! |
|
Title: Re: JETSETS Post by LANCER on 06/15/19 at 19:30:15 577273745E757C6F28281D0 wrote:
well welcome to the site ! [ch128526] |
|
Title: Re: JETSETS Post by SoMoJo on 06/15/19 at 19:41:10 Thanks! Did you get the PayPal payment? Let me know if you need anything else. |
|
Title: Re: JETSETS Post by LANCER on 06/16/19 at 02:19:47 775253547E555C4F08083D0 wrote:
Yep, I got it. TY Going out Monday |
|
Title: Re: JETSETS Post by Thumperman on 07/28/19 at 10:17:18 Just sent $30 for a jetset, I trust you will also get my address with the PayPal payment. Thanks in advance for getting me sorted, Mark |
|
Title: Re: JETSETS Post by LANCER on 07/28/19 at 11:17:34 6F6C7549544C514453210 wrote:
[ch128521] |
|
Title: Re: JETSETS Post by lilredthumper on 01/17/20 at 11:07:59 Hey Lancer, You still selling JETSETs? I'd like to put in an order! ;) |
|
Title: Re: JETSETS Post by LANCER on 01/18/20 at 06:50:27 52575A4F5D5B360 wrote:
Yes. $30 for a set and you can PayPal to savage.s40@gmail.com. If you want I can send you an invoice for credit/debit use as well, just need your email and I send it. |
|
Title: Re: JETSETS Post by lilredthumper on 01/18/20 at 12:21:43 Dope! PayPal sent. Thanks Lancer!! 7F727D7076612124130 wrote:
Yes. $30 for a set and you can PayPal to savage.s40@gmail.com. If you want I can send you an invoice for credit/debit use as well, just need your email and I send it.[/quote] |
|
Title: Re: JETSETS Post by Thomas L. on 01/28/20 at 05:57:28 Just put in an order. |
|
Title: Re: JETSETS Post by Thomas L. on 02/03/20 at 04:35:40 Lancer, I put in an order on the 28th for a jetset and still have not heard anything confirming you got it, I would send you a private message but I need to post more apparently lol. If you would like to email me directly, thomas.lynaugh.1@gmail.com |
|
Title: Re: JETSETS Post by LANCER on 02/03/20 at 06:46:50 170C0E000217545654630 wrote:
Sent email |
|
Title: Re: JETSETS Post by Pswartz on 04/06/20 at 06:37:51 Order submitted... working on my second Savage... this one will be for my daughter. Many thanks for quality parts! |
|
Title: Re: JETSETS Post by rdcox23 on 04/08/20 at 08:09:44 Submitting my order right now. This is my first Savage and I am throroughly enjoying it thus far. I just updated my address list on PayPal. If you need that information, please post a request here. |
|
Title: Re: JETSETS Post by warped3k on 06/01/20 at 14:50:44 I am not able to PM on here yet but sent you an email regarding purchasing a set. Thanks! |
|
Title: Re: JETSETS Post by garygrips on 06/02/20 at 14:07:27 Lancer , what's the price for the jetset ? |
|
Title: Re: JETSETS Post by warped3k on 06/10/20 at 16:23:46 Not able to PM you, did you get my email? |
|
Title: Re: JETSETS Post by LANCER on 06/11/20 at 15:56:45 697F6C6E7B7A2D751E0 wrote:
Don’t know, what was the name and email address you used ? |
|
Title: Re: JETSETS Post by warped3k on 06/11/20 at 16:24:18 I emailed you from warped3k@gmail.com |
|
Title: Re: JETSETS Post by OriginalT4L on 04/23/22 at 05:51:55 Hi just wondering if you still sell these |
|
Title: Re: JETSETS Post by LANCER on 04/23/22 at 10:57:46 Yes I do. PayPal $30 to savage.s40@gmail.com for US addresses. International shipping is more dependent upon your location. |
|
Title: Re: JETSETS Post by OriginalT4L on 05/04/22 at 04:35:41 7D707F7274632326110 wrote:
I am located in New Brunswick Canada |
|
Title: Re: JETSETS Post by LANCER on 05/04/22 at 10:45:32 033E252B25222D201878004C0 wrote:
I am located in New Brunswick Canada [/quote] Add $5 extra for shipping |
|
Title: Re: JETSETS Post by OriginalT4L on 05/04/22 at 19:29:20 Sent! |
|
Title: Re: JETSETS Post by Savagegemini on 06/20/23 at 14:51:03 Newb here...going to jump on this train as well. I need a jet set and will send PayPal upon reply to this comment. This is my last attempt fighting with a carb with unknown innards before talking about your performance carburetor... |
|
Title: Re: JETSETS Post by LANCER on 06/20/23 at 17:29:57 PM sent |
|
Title: Re: JETSETS Post by Savagegemini on 06/20/23 at 18:08:05 Got it, thx. PP sent. |
|
Title: Re: JETSETS Post by IndianaJonesin on 06/29/23 at 13:11:12 Email is having issues on my end, but I'd love to order the jetset kit. Does it still include the gasket and washers as well? |
|
Title: Re: JETSETS Post by LANCER on 06/29/23 at 14:43:50 Yes. The Jetset contains: Main jets: 150, 152.5, 155 Pilot jets: 50, 52.5, 55 3 washers to replace white spacer Float bowl gasket |
|
Title: Re: JETSETS Post by IndianaJonesin on 06/29/23 at 16:45:28 6469666B6D7A3A3F080 wrote:
Amazing - I sent an email to one provided via the email function but let me know if there are any more issues. Cheers! |
|
Title: Re: JETSETS Post by Yoshi on 10/16/23 at 18:03:19 I just sent money for a jetset, no rush as I just need some spare jets to play with |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |