|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> The Marketplace >> DRILL YOUR BRAKE ROTOR SERVICE /cgi-bin/YaBB.pl?num=1327803868 Message started by verslagen1 on 01/28/12 at 18:24:28 |
|
Title: DRILL YOUR BRAKE ROTOR SERVICE Post by verslagen1 on 01/28/12 at 18:24:28 1st one... mounted, short test run completed. [smiley=thumbsup.gif] I'll have to find an old set of stock pads and see if it cures the squeak. http://www.savageriders.com/verslagen/Disk/Disks4sale.jpg Warning! while this is commonly done, testing is in process. No warranty or guarantee of any kind is given. The service to drill your disc in the following patterns: Spirolx4........ $50 including shipping Spirolx8........ $65 including shipping Slanted 3-2... $65 including shipping Straight 3-2... $65 including shipping This includes a light debur of the drill holes. There will be a small polishing mark around each hole. Or in some cases I may deglaze the entire disc. Suggested postage... Priority Mail® Medium Flat Rate Box 13-5/8" x 11-7/8" x 3-3/8" With a minimum of $50 insurance I do have a few good used discs available for exchange or purchase for $60. The deposit will be returned when I receive your disc in comparable condition. Paypal, zelle or money order, $5 off for gift payments, money orders or zelle. PM me for scheduling. |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by built2last66 on 01/30/12 at 18:25:20 Machined or hand drilled? |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by verslagen1 on 01/30/12 at 18:45:24 Pilot holes drilled by cnc, then final size by drill press. So basically, if you want a custom design and provide the dim's, I can do it. |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by splash07 on 02/01/12 at 09:43:15 Will PM you as soon as I make the paypal transfer. |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by bikertrash on 02/16/12 at 19:37:28 Sweet! |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by verslagen1 on 02/17/12 at 13:18:56 2F2C303D2F346C6B5C0 wrote:
Your disk is ready, will drop it off at the PO tomorrow. |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by Doug on 02/17/12 at 21:37:15 So is this procedure just for looks? |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by verslagen1 on 02/17/12 at 22:16:24 http://www.savageriders.com/verslagen/Disk/diskx8.jpg |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by k9500winmag on 02/20/12 at 14:09:52 If done properly this can reduce braking heat and issues in water, dirt, and pad life. Mostly done in racing so unless you are light to light racing everywhere you go, this is pretty much for looks. A great look. I need to see if i can slide mine through the VF4 in my shop someday hehehehehe |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by splash07 on 02/21/12 at 20:15:05 273423223D3036343F60510 wrote: that rotor looks pretty familiar ;) |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by teabowl13 on 04/24/12 at 13:00:45 I can't believe what a great job you did on my disc, Sir. Very much appreciated! When I finally get my bike in my hands; hopefully next month, I'll try to get some really good pictures. WORTH EVERY RED CENT!! CHEERS!! |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by mpescatori on 10/04/16 at 07:19:47 Hi, long time no see :) I'd like to ask if you work on your own rotor or if I have to send you mine... ...I'd rather not ride without my front brake while the job is done... :-X :D |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by verslagen1 on 10/04/16 at 07:23:11 I have a couple extra for this purpose. |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by mpescatori on 10/06/16 at 05:03:34 OK how much for one, drilled, 8 sets of 5 holes (or 4 sets of 3+2 staggered) and posted to a domestic US address ? :) |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by verslagen1 on 10/06/16 at 07:24:37 5A47524454564358455E370 wrote:
8 sets of 5 holes... $30 plus $15 for shipping 4 sets of 5 holes... $20 plus $15 for shipping visiting? |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by mpescatori on 10/10/16 at 05:11:08 2E3D2A2B34393F3D3669580 wrote:
8 sets of 5 holes... $30 plus $15 for shipping 4 sets of 5 holes... $20 plus $15 for shipping visiting?[/quote] I wish... :-* No, I have a trusty old friend who's willing to be my POC to gather all my bits and throw them into one single package for shippers to process. ;) |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by verslagen1 on 10/17/16 at 12:09:23 Here's the 3-2 pattern... http://www.savageriders.com/verslagen/Disk/disk3-2.jpg The 4x pattern looked very spare, so this will be limited to the 8x pattern. |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by mpescatori on 10/20/16 at 10:55:43 Nice... Having seen your previous 5-hole pattern, which is slanted, I initially thought the 3-2 pattern was going to be slanted too. Looks nice though. Have you toyed on PC with a slanted 3-2 (or 4-3) pattern ? :) |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by verslagen1 on 10/20/16 at 11:33:48 The 3/16 hole size evenly divides the pad into 5 holes with no overlap. I want to keep the inside hole at the spoke location to minimize strength issues that may arise. If you have any pic's of what you're thinking of... send them to me. |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by verslagen1 on 10/20/16 at 15:05:16 Like so? http://www.savageriders.com/verslagen/Disk/disk3-2ang.jpg |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by mpescatori on 10/22/16 at 00:48:43 Aaah, YES ! :) To me, personally, this looks much more businesslike :) Just make sure the top hole of the three-tiered set is not too close to the rim of the rotor - it becomes fragile in case of a hard squeeze / panic stop. I'll have one of those, please 8-) And a Diet Cola... ;D ;D ;D |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by verslagen1 on 10/22/16 at 08:34:45 Every hole is the same diameter and at the same radius as the swoop pattern. Just the angular position is different. No one has commented about any noise so I don't expect this will either. |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by mpescatori on 10/22/16 at 09:48:45 Excellent. When I mentioned the holes, I meant my concern that a hole drilled too close to the rim might make the rim itself fragile. But then, I guess you are much more into these things than me ;) Yup, I'll have one, with fries and a Diet Cola :D |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by verslagen1 on 10/24/16 at 12:12:57 By popular demand, new options: Spirolx4 Spirolx8 Slanted 3-2 Straight 3-2 http://www.savageriders.com/verslagen/Disk/Disks4sale.jpg |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by mpescatori on 10/27/16 at 02:59:11 OK, $45 sent 8-) Shipping instructions in the PayPal message :) |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by verslagen1 on 10/27/16 at 07:04:40 293421372725302B362D440 wrote:
Will do. |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by old.indian on 10/27/16 at 10:58:49 Pay Pal sent.... old.indian |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by verslagen1 on 10/28/16 at 14:41:51 Have to look up a g code, but I got the coordinates programmed in. |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by verslagen1 on 11/01/16 at 21:54:15 Here it is... what do you think? http://www.savageriders.com/verslagen/Disk/Slant3-2.JPG |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by old.indian on 11/02/16 at 08:58:23 Looks pretty good to me. (The braded line and new pads arrived on yesterday's stage along with the TKat fork brace...) 8-) |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by Tocsik on 11/02/16 at 09:34:19 Where did you get your braided line? Mine's stock rubber from '08 and I'm thinking of replacing it. Will need standard length for my model, nothing odd. |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by verslagen1 on 11/02/16 at 10:21:20 I rode it this morning, didn't notice any noises. I think it's good to go. This one's on one of the thinner disks I had but still over the wear limit. I got a couple that are closer to 4.4mm or over that I'll be drilling for you. |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by mpescatori on 11/05/16 at 02:17:25 6F7C6B6A75787E7C7728190 wrote:
The Real McCoy ! Looks excellent ! 8-) |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by verslagen1 on 11/05/16 at 17:32:50 Peski and indian, pilot holes drilled, got to do final size and deburr. |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by old.indian on 11/05/16 at 18:00:49 514255544B4640424916270 wrote:
You are a gentleman and a scholar. I don't care what 'peski says about you..... 8-) |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by mpescatori on 11/11/16 at 01:18:22 3A39317B3C3B313C343B550 wrote:
You are a gentleman and a scholar. I don't care what 'peski says about you..... 8-) [/quote] :o Huh ? What did I say ? ::) |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by old.indian on 11/11/16 at 10:25:21 5E4356405052475C415A330 wrote:
You are a gentleman and a scholar. I don't care what 'peski says about you..... 8-) [/quote] :o Huh ? What did I say ? ::)[/quote] Idon't know, BUT you looked guilty when you said it... ::) |
|
Title: Re: DRILL YOUR BRAKE ROTOR SERVICE Post by old.indian on 11/14/16 at 15:26:19 Rotor arrived today... :) 3-2 slant looks even better than the pictures show it... 8-) 12/3/16.... And Even Better on the bike. 8-) [imghttp://i266.photobucket.com/albums/ii243/oldpackard/ls65022_zpsnovnutte.jpg (http://s266.photobucket.com/user/oldpackard/media/ls65022_zpsnovnutte.jpg.html)img] :) |
|
Title: Re: DRILL YOUR BRAKE ROTOR SERVICE Post by verslagen1 on 01/03/19 at 13:18:53 bump |
|
Title: Re: DRILLED BRAKE ROTOR SERVICE Post by mpescatori on 01/10/19 at 02:08:50 283B2C2D323F393B306F5E0 wrote:
http://www.savageriders.com/verslagen/Disk/Slant3-2.JPG Hi all, this is to bump Verslagen's drilled rotor service. I fitted mine last summer and the bike brakes much much better now, and no issues in the rain! Being a 24/7 rider, when it rains... who cares, rain gear and go! And the drilled rotor is much better than the OEM smooth rotor! 8-) |
|
Title: Re: DRILL YOUR BRAKE ROTOR SERVICE Post by d3adrock on 12/20/19 at 11:31:25 This looks really good |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |