SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Technical Documents/Reference >> Carb vent tubes...
/cgi-bin/YaBB.pl?num=1311197310

Message started by Serowbot on 07/20/11 at 14:28:29

Title: Carb vent tubes...
Post by Serowbot on 07/20/11 at 14:28:29

Note: Please post questions in the Rubberside or PM me...

Where do they go?... and what do they connect too?...

They go here,... and they connect to nothing.  They should be open to atmosphere...
;)...

http://i600.photobucket.com/albums/tt82/serowbot/vents001.jpg

Title: Re: Carb vent tubes...
Post by Edgar on 07/21/11 at 04:13:10

Are they 5/16" or 3/16"?

Title: Re: Carb vent tubes...
Post by ksthumper on 07/28/11 at 19:30:53

Sooooo.... does that mean i can just cut them 1" short from the stem and call it good? Cause mine are just a-danglin in the wind atm and not really effecting anything.

Title: Re: Carb vent tubes...
Post by Routy on 05/26/12 at 05:06:26

Wouldn't there be a reason why they bring them up higher ? Suppose they could splash 1" or more,......or maybe pick up dirt easier ?

Title: Re: Carb vent tubes...
Post by arteacher on 05/26/12 at 05:29:36

Mine were routed to the airbox when I bought the bike, which was bone stock.

Title: Re: Carb vent tubes...
Post by Drifter on 05/26/12 at 07:18:23

Mounted up high is to prevent water and dirt from getting in, some dirt will find its way in no mater what but a tiny amount. To answer the question yes you could have a 1 inch nipple.

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.