SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Forward Controls DIY /cgi-bin/YaBB.pl?num=1310160705 Message started by Rome08 on 07/08/11 at 14:31:45 |
Title: Forward Controls DIY Post by Rome08 on 07/08/11 at 14:31:45 A couple of weeks ago there was a thread about making your own forward controls..anyone know where it went?? |
Title: Re: Forward Controls DIY Post by MrBrownTX on 07/08/11 at 14:37:00 This might help, I am pretty new here and realized when you do a search it default only searches the last week of posts. There is a drop down box to change that on the search screen. My first few days were frustrating not finding anything I searched for because of that. |
Title: Re: Forward Controls DIY Post by EJID on 07/08/11 at 14:41:28 This might be the one that you were talking about. (from the Tech section) Make your own forward controls (http://suzukisavage.com/cgi-bin/YaBB.pl?board=tech;action=display;num=1115652141) Also, both EdL and Routy make a kit that you can buy extending them either 4" or 6" (Their links are at the top of the page in the Marketplace |
Title: Re: Forward Controls DIY Post by ROB CYCLE on 07/09/11 at 07:01:49 http://img1.classistatic.com/cps/kj/110525/591r1/26237mj_20.jpegIF YOU GO TO THIS OLD THREAD YOU CAN SEE HOW I DID MINE .CONTROLS ARE FROM TC BROS.CHOPPER WITH SOME MOD. LOOKS CLEANER THAN OTHER OPTIONS |
Title: Re: Forward Controls DIY Post by papi_ocho on 07/09/11 at 10:02:23 7865687A636F78696F0A0 wrote:
Tell me bout that kick stand! And they do look clean. Ohhhh and what link? |
Title: Re: Forward Controls DIY Post by ROB CYCLE on 07/09/11 at 15:11:00 the kickstand is from a honda rebel cut to length .welded bracket to frame.stand tucks in under frame.is invisible when up. for the forward controls you have to cut engine mount bolts back .reroute brake cable to get more length .mod a little tricky and requires some welding.i'll try upload more pics of brake side. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |