SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Mirror issue- Suggestions?
/cgi-bin/YaBB.pl?num=1303351751

Message started by DaveLKN on 04/20/11 at 19:09:11

Title: Mirror issue- Suggestions?
Post by DaveLKN on 04/20/11 at 19:09:11

Hi- when I bought my '98 the RH mirror had been knocked off and was replaced by a cheap clamp-on aftermarket thing that's useless. The cast aluminum master cylinder handlebar clamp the OEM mirror threads into is still holding the master cylinder on, but the upright threaded barrel was broken out and off of it.

I haven't ruled out trying to weld a lump of aluminum onto the existing clamp and drilling/threading it, but want to try replacing it first. Any idea if this piece is available by itself?

If I'm successful on either count, then I'll hunt for an OEM mirror.

If not, then anybody know of a well built aftermarket set they use?

I'm listening....

Title: Re: Mirror issue- Suggestions?
Post by verslagen1 on 04/20/11 at 19:50:31

http://www.cheapcycleparts.com/model_years/3574-suzuki-2000-savage-LS650P/assemblies/117823

http://cgi.ebay.com/ebaymotors/Master-Cylinder-Mirror-Mount-Suzuki-LS-650-Savage-_W0QQcmdZViewItemQQhashZitem3a6095eaf7QQitemZ250728540919QQptZMotorcyclesQ5fPartsQ5fAccessories

Title: Re: Mirror issue- Suggestions?
Post by justin_o_guy2 on 04/20/11 at 21:53:38

Good & Cheap answer.. handy having some of these guys around..

Title: Re: Mirror issue- Suggestions?
Post by DaveLKN on 04/21/11 at 20:57:11

Well, dang....

Just got in from work late tonite and this was great to find- Thanks! Now why didn't I think of this? I had always searched for 'master cylinder' and found several, but figured the clamp typically wasn't available by itself.

Ordering up right away!

Dave