SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Technical Documents/Reference >> Removing fork protectors class 101
/cgi-bin/YaBB.pl?num=1294807213

Message started by kimchris1 on 01/11/11 at 20:40:13

Title: Removing fork protectors class 101
Post by kimchris1 on 01/11/11 at 20:40:13

http://p1.bikepics.com/pics/2011/01/11/bikepics-2130274-200.jpg

Here is a pic of my fork protectors before being removed from my 2009 S-40 today..

Title: Re: Removing fork protectors class 101
Post by kimchris1 on 01/11/11 at 20:45:38

http://p1.bikepics.com/pics/2011/01/11/bikepics-2130275-200.jpg

I used a box knife with a new blade. Cut downward several times in the same area. Then gently use a small pry bar or something and gently place inbetween the area you cut. It should pop right off. Same technique on the other side..

Title: Re: Removing fork protectors class 101
Post by kimchris1 on 01/11/11 at 21:03:21

http://p1.bikepics.com/pics/2011/01/11/bikepics-2130277-200.jpg

When you get both of them off, your forks should look like this. :)