SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> rear axle nut and front pulley nut size?
/cgi-bin/YaBB.pl?num=1238458746

Message started by matt_savage on 03/30/09 at 17:19:06

Title: rear axle nut and front pulley nut size?
Post by matt_savage on 03/30/09 at 17:19:06

Sorry for the random question, but does anyone know offhand what the sizes for the rear axle nut is as well as the front drive pulley nut? Clymer's doesnt mention the size and I'm gonna be removing both of them shortly for some work and wanna know the sizes before I get started. TIA

-Matt

Title: Re: rear axle nut and front pulley nut size?
Post by verslagen1 on 03/30/09 at 17:48:51

Harbour fright has a good impact set of metric impact sockets 3/4" drive though. Cheaper than two craftsman sockets. And will cover anything you got to do on the bike.

24mm Confirmed rear axle nut.

Title: Re: rear axle nut and front pulley nut size?
Post by Max_Morley on 03/30/09 at 18:54:46

Look for front axle nut sockets for FWD cars, they run about $6 ea, less in sets and are available in the mm size needed and 1/2 " drive. MAx

Title: Re: rear axle nut and front pulley nut size?
Post by matt_savage on 03/31/09 at 05:18:11

I got the impact gun needed and 1/2" drive breaker bar needed. I just need to know the exact size of the nut holding the front drive pulley to the engine so I can swing by Lowe's on the way home and pick up the right size socket. Thanks for the help! You guys are awesome!

-Matt

Title: Re: rear axle nut and front pulley nut size?
Post by Madsen on 03/31/09 at 07:29:44

The front pulley nut is 36 mm.

Title: Re: rear axle nut and front pulley nut size?
Post by matt_savage on 03/31/09 at 07:46:25

Awesome! That's the info I needed, gracias.

-Matt

Title: Re: rear axle nut and front pulley nut size?
Post by T Mack 1 on 03/31/09 at 10:48:34

rear axle, one side is 24mm the other is 17 mm.