|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Next Suzi build /cgi-bin/YaBB.pl?num=1214362896 Message started by demin on 06/24/08 at 20:01:36 |
|
Title: Next Suzi build Post by demin on 06/24/08 at 20:01:36 Here is the next up on the chopping block.She aint pretty,YET. Pics make it look good. ;D http://p1.bikepics.com/2008/06/27/bikepics-1334780-800.jpg |
|
Title: Re: Next Suzi build Post by verslagen1 on 06/24/08 at 20:02:56 is this some how do you hold an idiot in suspense joke? |
|
Title: Re: Next Suzi build Post by demin on 06/24/08 at 20:05:20 Nope ;Dforgot to get the url first. Funny you are the first to respond.I was going to pm you.It has 23,000 on the clock,haven't even fired it yet,but I'm thinkin' Verslavy. |
|
Title: Re: Next Suzi build Post by verslagen1 on 06/24/08 at 20:20:01 You can open multiple exploders, or tabs when you forget something. Got 2 built and promised (sort of) 1 I'm having trouble with (it ate to drills) and 2 left to weld. About time to order again. Sweet, I wish you would ride it out to me, I'd like a blue one for my brother. 8-) |
|
Title: Re: Next Suzi build Post by demin on 06/24/08 at 20:23:01 That's funny because I'm repainting it,but I was thinkin' blue 'Flake.Like I said the pics make it look good,that's why I drove 70 miles to go look at it,but the price was right(I guess),and I wanted to do another one. Let me know when you have some more done,I'm in for 1. |
|
Title: Re: Next Suzi build Post by demin on 06/25/08 at 14:04:01 I've been getting alot of questions,and responses about the last '87,and thank you for all of the compliments.If you guys are interested,and the "powers to be" of the site don't mind I will start a topic in the tech section,and document/pics as I go. |
|
Title: Re: Next Suzi build Post by YonuhAdisi on 06/25/08 at 14:25:17 4B4A4246412F0 wrote:
I don't think the PTBs will mind at all Demin. With the attention to detail you put into the last project, a full documentary on this one will have everyone watching you closely especially me. |
|
Title: Re: Next Suzi build Post by demin on 06/25/08 at 14:39:45 If it helps,I don't mind doin' it for you guys. |
|
Title: Re: Next Suzi build Post by demin on 06/27/08 at 12:12:31 Started a topic in tech on the build.I will probably go to Northern tool tonight.So I will verify part # on my fender.I think I might pick up a couple of extras in case someone is interested in one ready to install on their bike.I think I am going Sportster tank on this build,with drag bars. |
|
Title: Re: Next Suzi build Post by strangeling on 06/27/08 at 12:26:27 Demin, I'm definately in for a fender if your gonna pick up an extra. I've also started the stripdown (bike not me) Glenn ;) |
|
Title: Re: Next Suzi build Post by verslagen1 on 06/27/08 at 12:33:15 tell us about the seats, look custom. |
|
Title: Re: Next Suzi build Post by demin on 06/27/08 at 14:16:28 Ok,I could only get 1 extra fender.they only had two.So strangeling you've got first option on this one,I'll get ahold of you for more info.I will try to get a couple more soon. The seat is the stock cover,but it looks like they stuffed 10lbs.of...into a 5lb bag. The part # for the fender is 1263 |
|
Title: Re: Next Suzi build Post by rigidchop on 06/27/08 at 18:25:15 you gonna do some cuttin on the frame on this one? you know ya wanna 8-) |
|
Title: Re: Next Suzi build Post by demin on 06/27/08 at 18:30:49 What are you,a mind reader? ;DI don't know yet.After 20 bucks at the carwash I sorta got the frame clean,and the whole thing needs painted.I was thinking about getting ahold of Tigman,and have him hardtail it.He is the guy who did Grail21's on here awhile back.If not I might cut off the tops of the frame. |
|
Title: Re: Next Suzi build Post by rigidchop on 06/27/08 at 18:42:08 ahhh great minds think alike ;D i was really just thinking about the seat area. i really like the tigman frame BUT i have a problem with the 90 deg. intake for the carb. i know i saw one awhile back, but never asked how it ran. you cant really go wrong with a sporty tank again either. |
|
Title: Re: Next Suzi build Post by demin on 06/27/08 at 18:56:31 I'm also debating leaving the shocks on.I don't want to build the same exact one again.I've got so many ideas. :-/ |
|
Title: Re: Next Suzi build Post by strangeling on 06/27/08 at 20:03:00 [quote Ok,I could only get 1 extra fender.they only had two.So strangeling you've got first option on this one,I'll get ahold of you for more info. [color=#00ff00] Demin, Oh you know I'm all over that fender ! ;D I sent you a PM |
|
Title: Re: Next Suzi build Post by rigidchop on 06/28/08 at 04:25:04 denim, are you set on the flat fender? that fender bender guy can do any fender ya want, ribbed, smooth etc. oh how bout some 3.5 gallon flat side tanks? more capacity, and not overly large to overpower the look of the bike. |
|
Title: Re: Next Suzi build Post by demin on 06/28/08 at 12:31:10 Yeah I've seen the fender guy.I'm thinkin' about going that route on the XS.I just like the Indian Larry,Johnny Chop type builds.I screwed up buying two projects plus going home,and getting the Honda.The '86 also needs tires. So I'm trying to get a list of parts together for each bike.yeah right... I need to get on Kustomjim's website see what he has.I would like to support our own. Lancer I'll be getting ahold of you for this build. |
|
Title: Re: Next Suzi build Post by demin on 07/10/08 at 13:56:40 Hey guys.I got screwed on going to Ohio this weekend,I'm not working either,so I will be working on getting parts done,and maybe working on my builds. |
|
Title: Re: Next Suzi build Post by Jay on 07/11/08 at 04:39:07 denim, Are you keeping the seat? I've got a crazy notion for my bike stewin' in the recesses of my brain, and the Savage seat and pillion might just do it. If you're going to part with the seat, I know I'd be interested. Thanks. |
|
Title: Re: Next Suzi build Post by demin on 07/11/08 at 06:41:38 The seat(s)are pretty nasty.Probably the only thing it's good for is the pan(s) |
|
Title: Re: Next Suzi build Post by Jay on 07/11/08 at 23:06:42 Ah. Well, it was a thought. I'm not far enough along in the project process to consider recovering at this point. Still "ify" on whether I'll do it at all. Been arguing with the evil monkey that lives in my brain. ;D Thanks Denim. |
|
Title: Re: Next Suzi build Post by Demin on 07/17/08 at 15:49:30 Thinkin' about going with this tank. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&_trkparms=tab%3DWatching&viewitem=&item=200239066286&_trksid=p3907.m32 I think it would look good with a scallop paint job. It'll sit high on the frame with those mounts.Friscoed!That's kinda funny being from a town called Frisco. |
|
Title: Re: Next Suzi build Post by Demin on 07/18/08 at 17:05:56 Bought the Sporty tank.Anyone looking for a Sporty tank that's easy to mount check it out.That price is cheap for that tank with mounting hardware. |
|
Title: Re: Next Suzi build Post by strangeling on 07/18/08 at 17:50:40 That sporty tank looks real coooooooool Demin 8-) |
|
Title: Re: Next Suzi build Post by Demin on 07/18/08 at 17:54:28 That should be the ticket with the scallops. ;) Picked up the rear tire yesterday.Maxxis Classic 150.Front is on b/o I'm gettin' pumped. |
|
Title: Re: Next Suzi build Post by strangeling on 07/18/08 at 18:21:39 The Maxxis Classic is a whitewall tire right ? |
|
Title: Re: Next Suzi build Post by Demin on 07/18/08 at 18:32:35 Yep, 2" wide. |
|
Title: Re: Next Suzi build Post by Demin on 08/08/08 at 10:02:04 I think the bobber build is on hold for a while.Tore down the engine,and found alot of bad.Needs cam,cam chain,tensioner,rocker arms,possibly a whole head,and alot of helicoils.I found wood lag bolts holding the head cover on.1 head stud stripped out of the case. I think I'm going to jump on the XS build. http://p1.bikepics.com/2008/08/08/bikepics-1379051-800.jpg Boken fin on head. http://p1.bikepics.com/2008/08/08/bikepics-1378987-800.jpg |
|
Title: Re: Next Suzi build Post by justin_o_guy2 on 08/08/08 at 11:02:15 That fin is "Right OUT there" to be seen. Stickin that on a bike youve worked to make Good Looking just wont fly. Be okay on a Rat Rod. |
|
Title: Re: Next Suzi build Post by verslagen1 on 08/08/08 at 11:13:15 Lag bolts only on the cover? what schlock mechanic would do that? You gotta lota work ahead of you as you got to check every thing he might've done. |
|
Title: Re: Next Suzi build Post by Demin on 08/08/08 at 12:09:16 I hear ya,guys.You wouldn't believe this thing.Head stud siliconed into the case,wrong bolts in the head cover.It's on hold for awhile I think. It's a f%#&*!g nightmare.Screwed again!I had a bad feeling about the motor,when I started the tear down,and found american bolts just cross threaded into holes.And 25,000 miles.I figured it would need a tensioner.Even the clutch basket is ground up from him riding it with the tensioner split.Believe it or not,I found all the pieces of the two springs,and the snap ring(yes it even popped off). |
|
Title: Re: Next Suzi build Post by strangeling on 08/08/08 at 12:55:14 dang man, just when things were coming along nicely that $h!t happens. >:( |
|
Title: Re: Next Suzi build Post by verslagen1 on 08/08/08 at 12:58:00 I would think you have some recourse for fraud, as while he may not of know the condition of the tensioner, but he did know the head bolt were glued in and should have disclosed that and the lag bolts. >:( |
|
Title: Re: Next Suzi build Post by Demin on 08/25/08 at 20:25:09 Thinkin' about using this set up on both of the builds for hiding the electrics,and mounting the battery. http://www.tcbroschoppers.com/id24.html |
|
Title: Re: Next Suzi build Post by verslagen1 on 08/25/08 at 20:48:10 Personally, I liked the frame stretch that +9 did. Probably cause I don't know if my back will take an unsprung frame. At times, I can barely stand the shocks that I got. (progressive is a comin') Yeah I like the open frame look too, if you can just hide the battery a little better. Will the battery fit in the frame opening under the seat? |
|
Title: Re: Next Suzi build Post by Demin on 05/19/09 at 15:01:53 The build is back on.WOOHOO Any ?s ask here instead of tech section. |
|
Title: Re: Next Suzi build Post by Yonuh Adisi on 05/19/09 at 16:18:11 That's great Demin, pics, pics, and more pics if you please. |
|
Title: Re: Next Suzi build Post by Wolf on 05/19/09 at 22:42:33 Yes yes! Pics and insight, pics and insight, shortcuts, ideas, can't wait! Wolf :D |
|
Title: Re: Next Suzi build Post by sakara on 05/20/09 at 10:38:15 grats! can't wait |
|
Title: Re: Next Suzi build Post by Demin on 05/21/09 at 06:12:53 I'll have pics shortly.Yesterday I went all out on the frame.I cut all the unused tabs off(stock seat mounts,belt guard,etc.)Welded on new tabs for the seat springs.I did this one a little different from the last one.Got the gas tank all mounted.Going to try and sandblast all the parts today.My black '86(used to be my girl's bike)is getting a makeover right now also.I'm still riding it,but I'm going to paint another set of sheetmetal,let it dry good.Then I'm going to do a the headplug leak,and change the clutch cable while it's apart changing the sheetmetal. |
|
Title: Re: Next Suzi build Post by Demin on 06/17/09 at 16:26:54 It's back on! |
|
Title: Re: Next Suzi build Post by Bobbert on 06/21/09 at 12:59:38 sweet! cant wait |
|
Title: Re: Next Suzi build Post by Demin on 06/21/09 at 15:55:46 I need an engine...BAD!.If anybody has one in there area,give me a holler. |
|
Title: Re: Next Suzi build Post by Demin on 04/28/10 at 07:44:55 I see alot of new guys buildin' bobbers,so I thought I would dig up my old threads about it.If anybody has questions feel free to ask. |
|
Title: Re: Next Suzi build Post by Scott_H on 04/28/10 at 07:58:42 Any pics of the finished product? |
|
Title: Re: Next Suzi build Post by Demin on 04/28/10 at 08:48:29 Just starting this build...again. ;D I'll be posting as I go. |
|
Title: Re: Next Suzi build Post by Scott_H on 08/30/10 at 09:41:11 It's been a while any progress / pics? |
|
Title: Re: Next Suzi build Post by Demin on 09/16/10 at 05:04:08 Well,it looks like I might just incorporate this build into my '86.The '86 is really needing some attention.I put about 1,000 miles on her this weekend.The plug/cap is getting bad especially at high rpm's.I blew both beams of the headlight out,Blew the baffle out of the exhaust at about 70(gone)Nail in rear tire(which was already my spare)front tire has dryrot cracks,dents in tank from going down on black ice in Dallas,etc.So it's time she gets some love.Still going in the same direction with the build though. |
|
Title: Re: Next Suzi build Post by Demin on 10/23/10 at 20:15:18 Well,I decided rather to build another Savage with the '86 really needing attention I am going to just do the build on the '86.I started putting some of the parts on(seat,tires,etc.)The Maxxis Classics are alot taller than the IRC Wildflares.For right now I put the shocks back on.I need to make longer struts.The rear tire hits with 9" on center struts.The white seat went on with no hassles.Monday I will get the piece made for the exhaust to make it an upswept.Haven't decided on the gas tank yet.I might run the Sporty tank,but that's getting used too much. Pics soon! ;) |
|
Title: Re: Next Suzi build Post by buggs on 10/24/10 at 15:11:50 Demin glad to see things are turning around, are you back in the warren area again? |
|
Title: Re: Next Suzi build Post by Demin on 06/29/11 at 11:12:39 Back to the world's longest time build thread.Here is the latest.Blasted and painted the frame House of Kolor Violet pearl.Tank is pearl white with violet scallops(getting repainted though)same colors,just not happy with my mask job. http://p1.bikepics.com/2011/07/12/bikepics-2238911-800.jpg http://p1.bikepics.com/2011/06/29/bikepics-2232463-800.jpg |
|
Title: Re: Next Suzi build Post by Demin on 06/29/11 at 11:18:05 I have my own shop again.In Liberty(Youngstown)Ohio.Just need time now after working on everybody else's stuff. http://p1.bikepics.com/2011/06/29/bikepics-2232487-800.jpg And my yard....woohoo. http://p1.bikepics.com/2011/06/29/bikepics-2232493-800.jpg And the mancave/showroom. http://p1.bikepics.com/2011/06/29/bikepics-2232496-800.jpg |
|
Title: Re: Next Suzi build Post by justin_o_guy2 on 06/29/11 at 11:41:24 That car looks like something I saw on Daktari so many years ago,, what is it? Congrats on having a shop again,, I know how important that is, |
|
Title: Re: Next Suzi build Post by Demin on 06/29/11 at 12:11:07 Thank you on the shop!!!The car is a Gazelle(Kit car),Mercedes replica on a VW pan. |
|
Title: Re: Next Suzi build Post by justin_o_guy2 on 06/29/11 at 12:15:44 Ohh, Shazzam! Wadda fine lookin car,, http://www.sunsetclassics.com/1929-mercedes-gazelle/gallery/ |
|
Title: Re: Next Suzi build Post by Z on 06/29/11 at 12:26:42 I LOVE that purple frame!!!!!!!!! [smiley=laugh.gif] I want!!!! ;D ;D ;D ;D |
|
Title: Re: Next Suzi build Post by Demin on 02/06/12 at 05:18:22 Well let's try this build.....AGAIN.I see my pics are gone.So I'll give everybody a refresher. This is the direction I'm going with it. http://p1.bikepics.com/2008/07/30/bikepics-1370555-800.jpg I'll probably do something different with the exhaust on this one,since I put that muffler on the '86. I did decide the '86 will get redone.And this one will still get built. Here's where I am so far.... http://p1.bikepics.com/2011/07/12/bikepics-2238911-800.jpg http://p1.bikepics.com/2011/06/29/bikepics-2232463-800.jpg I'm going to repaint the tank.Wasn't feeling the scallops,and they have some spots in them I don't like.The whitewalls went on the '86,so I'm going to probably put raised white letter tires on this one.I want to give it kind of a Mopar muscle car look. |
|
Title: Re: Next Suzi build Post by Demin on 02/06/12 at 05:23:39 Still need to tear the '86 down.But it's been so nice this winter I'm still riding every so often.Stole some of the '87 build parts to put on the '86.So here's what she looks like as of right now. http://p1.bikepics.com/2011/08/16/bikepics-2257982-800.jpg |
|
Title: Re: Next Suzi build Post by Demin on 02/06/12 at 05:45:14 AND....on top of that,I have all this going on. Building a complete custom.Harley based.Customer's http://p1.bikepics.com/2012/02/06/bikepics-2343555-800.jpg '85 Virago 1000.slight frame mods.Mine,to sell. http://p1.bikepics.com/2012/01/18/bikepics-2333363-800.jpg My all custom '79 Superglide.Whenever...but hopefully soon. http://p1.bikepics.com/2009/09/18/bikepics-1783291-800.jpg Plus I have a Ninja that I'm painting all custom. |
|
Title: Re: Next Suzi build Post by Demin on 03/24/12 at 07:05:48 OK..................It's back on again!!!!!!!!!!!!Changed up colors .....again A little refresher....The day after I brought it home after about 10 bucks and 4 cans of engine degreaser at the carwash http://p1.bikepics.com/2008/06/27/bikepics-1334780-800.jpg The direction I'm going with it. http://p1.bikepics.com/2008/07/30/bikepics-1370555-800.jpg So far...... House of Kolor Violet http://p1.bikepics.com/2011/07/12/bikepics-2238911-800.jpg The new heart for her. http://p1.bikepics.com/2012/03/24/bikepics-2371088-800.jpg Tires should be on this coming week,that way I can get my stance set up. I do need to get one of Skeebo's tanks.And I'll be checking the cam chain tensioner.12,xxx miles the plug is leaking,so that'll get fixed before it goes in the frame. |
|
Title: Re: Next Suzi build Post by Demin on 03/24/12 at 07:23:55 Man................I just realized this build has been going on for almost 4 years. :oThat's got to be a record. |
|
Title: Re: Next Suzi build Post by bluesrockdoc on 03/25/12 at 03:43:40 I been trying to come up with an idea for what to do for a tank and that is exactly the idea I have in my head, where is that from, how can I get one?!?!?!!! |
|
Title: Re: Next Suzi build Post by Demin on 03/25/12 at 05:23:17 It's an aftermarket Sportster tank.Any local ftermarket shop can get one.Or look in J&P Cycles or one of those companies.Unless you want to do backbone surgery on your frame,a Sporty tank is about all that will fit on.If you look at the pic of the purple frame,there is a bracket welded on right where the decomp solenoid goes(it still goes on..I hope)That is for the front mounts.There are a few different styles of mounting tanks.I liked this tank because of the indented scallops. These tanks probably run around the $150.00 range,new. Here is another one I did a few years ago.This is just a 70's style stock tank.On the front it has mounting tabs.I welded a connector nut to the top of the backbone and bolted it.The rear I cut the tab off the stock tank and welded it to the new tank. http://p1.bikepics.com/2007/09/09/bikepics-1018371-800.jpg |
|
Title: Re: Next Suzi build Post by bluesrockdoc on 03/25/12 at 15:03:19 Thanks Demin |
|
Title: Re: Next Suzi build Post by Demin on 06/29/12 at 06:32:14 This thread is alive.....again.This time I have to build it.Just sold it. This is where I'm at with it so far.Building this one as a 2 up.Young guy and his girl. http://p1.bikepics.com/2012/06/16/bikepics-2416188-full.jpg |
|
Title: Re: Next Suzi build Post by DangRider on 07/01/12 at 14:49:22 Love the rear "suspension"! ;) |
|
Title: Re: Next Suzi build Post by Demin on 08/15/12 at 20:53:49 A little progress on it........ Bars are just mock ups to see where we are going with the bars.Drags weren't cutting it. http://p1.bikepics.com/2012/08/15/bikepics-2442526-full.jpg http://p1.bikepics.com/2012/08/15/bikepics-2442523-full.jpg http://p1.bikepics.com/2012/08/15/bikepics-2442525-full.jpg |
|
Title: Re: Next Suzi build Post by Demin on 09/06/12 at 18:34:48 Made a lttle headway on the '87. http://p1.bikepics.com/2012/09/06/bikepics-2452123-full.jpg http://p1.bikepics.com/2012/09/06/bikepics-2452125-full.jpg http://p1.bikepics.com/2012/09/06/bikepics-2452127-full.jpg And a shot of my company logo. http://p1.bikepics.com/2012/09/06/bikepics-2452126-full.jpg |
|
Title: Re: Next Suzi build Post by Demin on 09/09/12 at 11:37:56 Coming together. http://p1.bikepics.com/2012/09/09/bikepics-2453237-full.jpg http://p1.bikepics.com/2012/09/09/bikepics-2453239-full.jpg http://p1.bikepics.com/2012/09/09/bikepics-2453241-full.jpg |
|
Title: Re: Next Suzi build Post by ToesNose on 09/10/12 at 04:37:19 Looking good Demin ;) I looked but didn't see if you posted, what tires are on there? |
|
Title: Re: Next Suzi build Post by Demin on 09/10/12 at 05:19:27 The rear is an IRC Wildflare 150/90-15.I also have the same style tire for the front in 100/90-19.The tire on it now is a Sumitomo 3.25-19.It was cheap and looks like the Avon Speedmaster.I'll run it on my orange bike eventually and see if I like how it handles. |
|
Title: Re: Next Suzi build Post by justin_o_guy2 on 09/10/12 at 12:39:15 Thats the kind of 1/2 impact I have. 27 years old, works great, I did blow the anvil out of it once,, |
|
Title: Re: Next Suzi build Post by Demin on 10/02/12 at 17:13:52 Getting close.Need to get new pics of it.Made a bare minimum battery box.Dual 4" round headlights.Put the '87 flywheel in the newer motor.70 bucks for a puller. |
|
Title: Re: Next Suzi build Post by srinath on 10/02/12 at 18:12:34 04050D090E600 wrote:
Well maybe on savage I got a bike in pieces in 2005. It was a weekend away from running down the road. I used it to prototype parts for a year or 2. Then I took it further apart and powdercoated the frame somewhere in 07 or so. Then over the next 4-5 years Fitted various experimental parts on it ... till about 2 weeks ago I rode it ... still needs FE work, rear brake work etc etc ... Worst of all ... After all that waiting ... it still makes only 40 hp. Cool. Srinath. |
|
Title: Re: Next Suzi build Post by built2last66 on 10/02/12 at 18:30:54 44454D494E200 wrote:
What do you mean by puller? I might need a sissy bar fabbed and some tins painted.. Demins latest project is tops btw, of course :D |
|
Title: Re: Next Suzi build Post by verslagen1 on 10/02/12 at 18:44:16 75627E7B63257B7664632121170 wrote:
What do you mean by puller? I might need a sissy bar fabbed and some tins painted.. Demins latest project is tops btw, of course :D[/quote] You have to have a special tool to remove the flywheel. |
|
Title: Re: Next Suzi build Post by built2last66 on 10/02/12 at 19:56:44 I wasn't thinking, as usual. |
|
Title: Re: Next Suzi build Post by Demin on 10/20/12 at 17:52:52 Been making a little progress on it.Made the struts today,probably paint them tomorrow.On the downhill side of this build.Guy is paying it off Monday,gotta git'er done. http://p1.bikepics.com/2012/10/20/bikepics-2470039-800.jpg |
|
Title: Re: Next Suzi build Post by ToesNose on 10/20/12 at 17:55:22 She looks wild, good work Demin :) |
|
Title: Re: Next Suzi build Post by justin_o_guy2 on 10/20/12 at 17:57:45 Is the rear brake line situated where its gonna go? |
|
Title: Re: Next Suzi build Post by built2last66 on 10/21/12 at 19:30:11 Thats a nice scoot, I've seen it in person, you can pick Demins style out in a crowd :D |
|
Title: Re: Next Suzi build Post by Demin on 12/03/12 at 10:56:38 Just about done.Had it running yesterday,but the needle and seat are bad in the carb.Picked up a new one today,just haven't installed it yet. |
|
Title: Re: Next Suzi build Post by Demin on 12/05/12 at 09:37:17 FINALLYafter only 4 1/2 years(in my young Frankenstein voice) IT'S ALIVE!!!!!! Time to bundle up and start the shakedown runs. 8-) |
|
Title: Re: Next Suzi build Post by Scott_H on 12/05/12 at 09:44:38 Congrats! |
|
Title: Re: Next Suzi build Post by ToesNose on 12/05/12 at 13:06:56 We want video! :D |
|
Title: Re: Next Suzi build Post by Demin on 12/14/12 at 10:07:35 Other than a wetsand and buff and a good detail,she's done.Put a couple miles on today.Still sick or I would take it for a good ride. http://p1.bikepics.com/2012/12/14/bikepics-2490122-800.jpg http://p1.bikepics.com/2012/12/14/bikepics-2490124-800.jpg |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |