SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Superbrace Installation on the S40
/cgi-bin/YaBB.pl?num=1171486753

Message started by markrider on 02/14/07 at 12:59:13

Title: Superbrace Installation on the S40
Post by markrider on 02/14/07 at 12:59:13

I purchased a Superbrace for my 2005 S40. Before I begin to remove the black plastic fork protectors, does anyone know how to remove these little hard plastic dodads without scratching the fork tubes? My fork tubes look new and I sure don't want to mess them up with scratches. Great site, you guys are the best!
markrider

Title: Re: Superbrace Installation on the S40
Post by mavrik on 02/15/07 at 19:09:01

I got one too, haven't put it on yet.

2005 S40, I did speak to the tech at superbrace after they sent me the wrong one he says to cut the black plastic protector off with an exacto knife ( box cutter)

He said it was easy to do and install ??? We'll see maybe on sunday.

With all the snow shoveling and work I have had no time

Cheers Good Luck

Title: Re: Superbrace Installation on the S40
Post by Savage_Rob on 02/16/07 at 05:05:52

mavrik wrote:

he says to cut the black plastic protector off with an exacto knife ( box cutter)

I was thinking I'd heard others had either done that or just snapped them off.

Title: Re: Superbrace Installation on the S40
Post by Phelonius on 02/16/07 at 11:27:02

I would say remove the forks to do it. While they are off you can install a set of gaiters to protect the fork tubes.
Mo Betta.

Phelonius