|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Technical Documents/Reference >> Rubber Brake Pedal Cover /cgi-bin/YaBB.pl?num=1149544176 Message started by 911radioman on 06/05/06 at 13:39:26 |
|
Title: Rubber Brake Pedal Cover Post by 911radioman on 06/05/06 at 13:39:26 Well, I hopped on the bike and rode up to Auto Zone with tape measure in hand and here is the result... http://suzukisavage.com/images/uploaded/BPcover1.jpg http://suzukisavage.com/images/uploaded/BPcover2.jpg And here is the part number, should anyone else choose to do this to your own bike... http://suzukisavage.com/images/uploaded/BPcover3.jpg The fit is pretty tight, so I don't think any type of adhesive will be necessary. It gives me much more surface area for my foot, and the ribbing in the pad makes it less likely for my foot to slide off when I don't want it to. |
|
Title: Re: Brake Pedal Cover -- NOW DONE! Post by Ed_L. on 07/19/06 at 10:38:54 Ended up using a dab of contact cement on mine so it doesn't move around, beside that it's great ;D. |
|
Title: Re: Brake Pedal Cover -- NOW DONE! Post by 911radioman on 07/19/06 at 11:57:53 Yeah, its not the absolute perfect fit, but it was about the closest I could find. Mine stays in place just fine without glue, I just have to watch catching my toe on it and pulling it off. |
|
Title: Re: Brake Pedal Cover -- NOW DONE! Post by 911radioman on 07/25/06 at 23:36:25 Fact -- I've ridden with this mod in wet weather and it does not get slick. Look closely and you'll see the tread on the cover. I'll guarantee you it is less slick than the metal pedal. |
|
Title: Re: Brake Pedal Cover -- NOW DONE! Post by DevlshOne on 06/01/09 at 08:51:56 Great find! Thanks for the tip. A spot of Gorilla Glue on mine and it's not going anywhere. 8-) |
|
Title: Re: Brake Pedal Cover -- NOW DONE! Post by arteacher on 09/22/11 at 12:26:19 Here is a pic of my installation. I used a stainless wire tie and cut out the groove in the raised part of the tread to set it in flush.http://p1.bikepics.com/2011%5C09%5C22%5Cbikepics-2276201-800.jpg |
|
Title: Re: Rubber Brake Pedal Cover Post by jgrandmont on 05/19/13 at 03:46:22 Just made this addition to my '09 S40. Seems like a great idea. |
|
Title: Re: Rubber Brake Pedal Cover Post by Gibsonman on 06/29/13 at 17:25:43 GREAT IDEA!!! I just ordered one!! Thanks! Des :D |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |