SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Gauges
/cgi-bin/YaBB.pl?num=1147196492

Message started by stock87 on 05/09/06 at 10:41:32

Title: Gauges
Post by stock87 on 05/09/06 at 10:41:32

has anyone installed an oil pressure gauge? if so were did u get it?

Title: Re: Gauges
Post by vroom1776 on 05/09/06 at 13:55:03

Oil pressure?  I don't think that any are made specifically for our bike.  You may want to check out JC whitney, though.

Title: Re: Gauges
Post by SeattleSavage on 05/09/06 at 17:16:07

Haven't found one yet will post when I do. Needs to be 20-30 psi at the most. The pressure runs 7-10 psi and I don't think you'll get accurate enough results from the standard 60 or 100 psi gauges. Liquid filled is preferred.

If you find one first let me know. I will be installing one fer sure.

Kevin

Title: Re: Gauges
Post by azjay on 05/10/06 at 07:37:12

harley's run low pressure, hi volume oil, check into harley set ups.

Title: Re: Gauges
Post by torque on 05/10/06 at 08:03:40

u would have to find somewhere to drill and tap a hole for the hose to screw into. harley's have fairly high oil pressure,enough to make the oil cycle back into the oil tank when the bike is turned off. i say forget the whole idea unless u never change your oil,or u like sticking bolts in oil passages, as long as there is oil in the window u'll be alright.

Title: Re: Gauges
Post by SeattleSavage on 05/10/06 at 16:44:57


torque wrote:
u would have to find somewhere to drill and tap a hole for the hose to screw into. harley's have fairly high oil pressure,enough to make the oil cycle back into the oil tank when the bike is turned off. i say forget the whole idea unless u never change your oil,or u like sticking bolts in oil passages, as long as there is oil in the window u'll be alright.


Bolt #18 is where you can put it, it's just a plug on the front right cover.
I'm just a stickler for gauges. If my gauge reades 7-10 I know my oil pump is working. I can look in the window for level. And I will probably add a temp sender too. If pressure or temp start to deviate I know a problem is coming and maybe nip it in the bud before it blooms.
Jeese flower analogies and motorcycle talk, it just isn't right is it. I'm ok, no really, ask one of my women. And no offense lady riders, I think most highly of you.

Kev

I knew I saw it some where.


Kropatchek wrote:
It's the plug #18 that you can take off and attach an oilpressure gauge.

http://www.ronayers.com/fiche/300_0271/crankcase/crankcase.cfm?man=su&groupid=7170&parent=7080

Greetz
Kropatchek ;D




SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.