SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Front Brake Rotor
/cgi-bin/YaBB.pl?num=1135705397

Message started by theikeman on 12/27/05 at 09:43:17

Title: Front Brake Rotor
Post by theikeman on 12/27/05 at 09:43:17

Does any one know what if any, other brake rotors will fit the Savage. I know that a few Yamaha brakes are interchangeable (same size and bolt pattern). For example: Slotted XS1100 wil fit on XS650.
Thanks
Ike

Title: Re: Front Brake Rotor
Post by SavagePielk on 12/27/05 at 15:25:43

I think the Intruder will be a good guess, as almost anything is interchangeable between Savage and Intruder

Title: Re: Front Brake Rotor
Post by Reelthing on 12/28/05 at 04:40:22

I couldn't come up with any that cross over to the EBC part number the Savage uses - it looks like it is unique

Title: Re: Front Brake Rotor
Post by klx650sm2002 on 12/29/05 at 02:52:44

If you are looking for more braking power then a 11mm master cylinder might work, it gives 33% more line pressure than the std. 12.7mm but also has 33% more lever travel so might not work, it did on KLX, That's all I can say.

Clive W :D