SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> S40 Saddlebag Supports /cgi-bin/YaBB.pl?num=1121547381 Message started by trapper_canada on 07/16/05 at 13:56:21

Title: S40 Saddlebag Supports Post by trapper_canada on 07/16/05 at 13:56:21 I bought some LS650/S40 Saddlebag Supports for the wife's S40.  Because there is no backrest, there is only one bolt to mount the supports to.  Where the other bolt 'should be' there is a small pin.   Is there something I'm missing?  did Suzuki skrew this one up?  Doesn't seem right having half the bracket just hanging there. Not to mention it rattles cause its not bolted in on one part. Any thoughts??

Title: Re: S40 Saddlebag Supports Post by Greg_650 on 07/16/05 at 16:20:56 trapper_canada wrote: I bought some LS650/S40 Saddlebag Supports for the wife's S40.  Because there is no backrest, there is only one bolt to mount the supports to.  Where the other bolt 'should be' there is a small pin.   Is there something I'm missing?  did Suzuki skrew this one up?  Doesn't seem right having half the bracket just hanging there. Not to mention it rattles cause its not bolted in on one part. Any thoughts?? Check my new topic about Frame and Chassis Photos in the  Technical Corner.   http://suzukisavage.com/cgi-bin/YaBB.pl?board=tech;action=display;num=1121534397 I just posted a picture of the Savage rear fender.  It shows the saddle bags supports and the bolts used for them.  That might help you decide.

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.