SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Valves cover screaming /cgi-bin/YaBB.pl?num=1121156058 Message started by augh on 07/12/05 at 01:14:18 |
Title: Valves cover screaming Post by augh on 07/12/05 at 01:14:18 The other day while driving 125 miles thru my beautiful Tuscany I heard a strange sound coming out from the valve cover (this at least was my impression). It's like a bell screaming and is coming out, when the bike is decelerating, at low rpm's. I like to keep valve clearence over the required free play adjustment ( I have the feeling that the bike has more power at low rpm's and gets rpm's quicker) and the valves are always noisy, but I never heard it before. Is it now the time to adjust the free play or could it be something else (cam chain??)?? My bike has 6,000 miles on. Tx, Augusto. |
Title: Re: Valves cover screaming Post by Greg_650 on 07/12/05 at 05:51:15 augh wrote:
Don't understand the description of a "bell screaming". |
Title: Re: Valves cover screaming Post by augh on 07/12/05 at 06:20:40 Let me try to describe it: It's a metallic sound coming out from the valve cover around 1500-2000 rpm's only when the bike is decelerating . It reminds me a lament . It' s not there when accelerating. The frequency is very close to a small /medium bell . I wish I could record it . I had the impression that was created by the too much free play of the valves and it appeared all at once . Tx Greg for your attempt to help me find the reason of it. Augusto. |
Title: Re: Valves cover screaming Post by Paladin on 07/12/05 at 06:30:38 Sounds like something is loose that that develops a resonate vibration at a particular engine speed. It'll only get worse until it falls off, unless you find and tighten the loose screw/bolt. Our New Beetle did the same thing, but it sounded more like someone had added a 'fart pipe' to the exhaust. Noticed only on decel as on accel it was covered by the louder exhaust and shorted duration of passing thru the offending RPM range. |
Title: Re: Valves cover screaming Post by Greg_650 on 07/13/05 at 05:39:51 augh wrote:
Well, I don't know...but I think that I'd make sure not to run the engine until I had a peek inside to see what could cause that sound. Doesn't sound good. |
Title: Re: Valves cover screaming Post by augh on 07/14/05 at 00:50:29 OK , I worked on the bike adjusting the valves freeplay. While disassembling the left chromed part on top of the engine, I noticed that the front bolt , the long one, was not tight. I drove the bike only for few miles and could not hear anything strange. Hope the problem is solved now. I believe the bolt head created the problem. Tx you all. Augusto. |
Title: Re: Valves cover screaming Post by Savage_Rob on 07/14/05 at 05:04:22 Yeah, those chrome covers do kinda function as bells when not tight (or if missing any rubber pads). |
Title: Re: Valves cover screaming Post by DavidV on 07/14/05 at 06:09:13 Is there any reason not to just leave the chrome covers off? I've always thought they looked odd. And I bet it'd make swapping the sparkplug simpler. |
Title: Re: Valves cover screaming Post by Greg_650 on 07/15/05 at 06:27:33 How often do you need to swap the spark plug? |
Title: Re: Valves cover screaming Post by DavidV on 07/15/05 at 21:01:29 Might check it quite a bit while working out the jet. So, are the covers purely cosmetic? |
Title: Re: Valves cover screaming Post by WD on 07/15/05 at 21:21:54 Yep. Except for keeping small leaves out of the plug cavity. -WD |
Title: Re: Valves cover screaming Post by DavidV on 07/16/05 at 06:22:22 Cool; thanks. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |