SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Which way to turn mixture screw? /cgi-bin/YaBB.pl?num=1117038924 Message started by lagagnon on 05/25/05 at 09:35:24 |
Title: Which way to turn mixture screw? Post by lagagnon on 05/25/05 at 09:35:24 Recently I did the white spacer carb mod: reduced it to half thickness and then turned out the carb air idle mixture screw about 2 turns. Also did a slight adjustment on the idle speed screw. The 2004 Savage runs so much better at mid-speed and when cold. Also a much nicer throatier deceleration sound. I no longer get backfires when turning the machine off. However, I am now getting the odd mild backfire sometimes on deceleration and on some gear changes, which I rarely had before the mod. Is there any fine tuning I could do to the air idle mixture screw to reduce this backfiring? Larry Gagnon |
Title: Re: Which way to turn mixture screw? Post by Reelthing on 05/25/05 at 10:05:02 did you up the main jet as well? |
Title: Re: Which way to turn mixture screw? Post by lagagnon on 05/25/05 at 12:54:49 Reelthing wrote:
No. |
Title: Re: Which way to turn mixture screw? Post by WD on 05/25/05 at 14:46:08 There's your answer... you should hear mine, every upshift, downshift, or deceleration, sounds like a war zone. :D Sure makes the normal people flinch... -WD |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |