SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Ignitor Hook Up
/cgi-bin/YaBB.pl?num=1116391725

Message started by tx650 on 05/17/05 at 21:48:44

Title: Ignitor Hook Up
Post by tx650 on 05/17/05 at 21:48:44

I need some help to get a 96 Savage going again. The Ignitor module and ignitor connector were missing from the bike. I found a 32900-24B10 Ignitor that is suppose to fit this model. Ignitor module has 8 pins( 2 rows of 4 each). I have 6 wires where the connector was cut off. The colors are, Black, Orange, Green, Orange/White tracer, Black/Yellow tracer, Black/White tracer. I need to match these wires to the correct ignitor pins. Anyone know how these hook up or where I may find this information? Any help appreciated.
I have a wiring diagram that shows the six wires but does not identify the pins

Title: Re: Ignitor Hook Up
Post by Kropatchek on 05/18/05 at 01:24:45

Here the original from the Suzuki WSM page 5-7
http://img277.echo.cx/img277/8531/igniterunit6bl.jpg

Greetz
Kropatchek ;D

Title: Re: Ignitor Hook Up
Post by slavy on 05/18/05 at 07:05:04

May be it will be a good idea to place this picture in the technical corner.
And by the way GOOD TO HAVE THE SITE UP again.

Title: Re: Ignitor Hook Up
Post by Kropatchek on 05/18/05 at 08:13:32

slavy wrote:

May be it will be a good idea to place this picture in the technical corner.
And by the way GOOD TO HAVE THE SITE UP again.

Done!!

Greetz
kropatchek ;D ;D

Title: Re: Ignitor Hook Up
Post by tx650 on 05/18/05 at 21:44:45

Kropatchek-Thanks for your response. The ignitor pin out shown in your post is for an older bike. My 88 Savage has this type on it. The 96 has a different ignitor. The information I need is for the later ignitor with 8 pins.

Title: Re: Ignitor Hook Up
Post by gazab44 on 05/19/05 at 14:44:02

just had a look at the ignitor on my 96 sav heres wot i found;

1-orange
2/3/4- blank
5-black/yellow
7-black
8-green
9-orange/white
10-black/white

hope this is of help bud :)

Title: Re: Ignitor Hook Up
Post by tx650 on 05/19/05 at 21:34:34

Gazab44-thanks for your response. Its beginning to look as if I have a weird ignition module. It was sold to fit a 96 Savage and has part number 32900-24B10 on it,but has a 8 pin connection that is offset to the left. Found an ignitor on parts list that looks like the one I have,but it has part number 32900-24B30 and fits a 96 K4 whatever that is. Guess I need to find the right ignitor for this bike,one that will fit the connector that you and Kropatchek described. Maybe I can use this one for a paper weight. Thanks to all for your time and help.

Title: Re: Ignitor Hook Up
Post by WD on 05/19/05 at 23:20:56

I'll check the Suzuki electrical bits bin at the shop. I more than likly have the right unit, just need to find it...
-WD

Title: Re: Ignitor Hook Up
Post by gazab44 on 05/20/05 at 00:21:20

return the ignitor and insist on the correct model....you paid for it... :)

Title: Re: Ignitor Hook Up
Post by WD on 05/20/05 at 19:54:14

Don't have any at work, all I have is OLD GS stuff. Sorry.
-WD

Title: Re: Ignitor Hook Up
Post by Savage_Rob on 05/21/05 at 21:07:57

I noticed a 32900-24B10 on sale on eBay a week or so ago and, since I was have some electrical trouble, checked my part number just in case. My '98 has a 32900-24B11 module. The microfiche on RonAyers.com shows the 32900-24B10 as a discontinued version replaced by the 32900-24B11. It also shows the same modules for both the '96 and the '98 Savages. The 32900-24B30 fits the 2004 model (LS650 K4) - not the '96. The '96 is the LS650PT. I don't know if the parts are interchangeable or not.