SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Chamber Seal
/cgi-bin/YaBB.pl?num=1112993444

Message started by Savage_Rob on 04/08/05 at 13:50:44

Title: Chamber Seal
Post by Savage_Rob on 04/08/05 at 13:50:44

It seems I've always had a very slight exhaust leak where the muffler slides onto the header pipe and have never been able to fully seal it just torqueing on the clamp. I knew there was some sort of sealant tape around and finally found this: http://www.xoutfitters.com/moto/ex_sil_access/tape.jpg
The stuff was easy to use and seems to work pretty well. Be advised that it seats using the heat of the exhaust, so you'll smell it for the first several miles you ride when you stop.

Title: Re: Chamber Seal
Post by Greg_650 on 04/08/05 at 14:04:25

Good find. The stock exhaust always has a little leak at that clamp that keeps the oil window blackened....useful.

Title: Re: Chamber Seal
Post by Savage_Rob on 04/11/05 at 06:20:46

Found this too. Haven't used it but Permatex has always done its job for me before...

PERMATEX® Muffler & Tailpipe Sealer (http://www.permatex.com/auto/autouc.asp?automotive=yes&f_call=get_item&item_no=80335)