|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Upper Motor Mount on Head Cover /cgi-bin/YaBB.pl?num=1702404383 Message started by ThumperPaul on 12/12/23 at 10:06:23 |
|
Title: Upper Motor Mount on Head Cover Post by ThumperPaul on 12/12/23 at 10:06:23 When attempting to remove the head cover and head with the bike still in the frame, how does one get around upper motor mount connected to the head cover. Obviously, you remove 2-3 nuts and bolts, but then where do you swing and/or remove the motor mount out of the way? Newbie here… |
|
Title: Re: Upper Motor Mount on Head Cover Post by verslagen1 on 12/12/23 at 10:09:50 yes,remove 3 nuts and bolts and then the 2 plates. |
|
Title: Re: Upper Motor Mount on Head Cover Post by ThumperPaul on 12/12/23 at 10:23:07 Ah ha! There are 2 plates! Looks like all 1 piece at first blush! Thanks Verslagen ! |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |