SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> The WTFs at Versy's place /cgi-bin/YaBB.pl?num=1700632219 Message started by verslagen1 on 11/21/23 at 21:50:19 |
Title: The WTFs at Versy's place Post by verslagen1 on 11/21/23 at 21:50:19 OK, so I'm putting in a Versiplug for someone. I finish up go to put in the top motor mount and one of the bolts don't line up with the holes. WTF they were in there when I took them out? So I loosened the footpegs (I had to cause the spring was in wrong) and put a floor jack under the engine, it came up enough to align the holes Never done that before. :-? |
Title: Re: The WTFs at Versy's place Post by Dave on 11/22/23 at 03:56:21 Sounds like you better check the rear and upper motor mount bolts for tightness.....the engine should not have dropped down if those were as tight as they should be. |
Title: Re: The WTFs at Versy's place Post by Serowbot on 11/22/23 at 05:59:21 Frame sag? |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |