SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Temporary Rear Turn Signal Stalk Fix /cgi-bin/YaBB.pl?num=1699478657 Message started by hammyo on 11/08/23 at 13:24:17 |
Title: Temporary Rear Turn Signal Stalk Fix Post by hammyo on 11/08/23 at 13:24:17 Hello - 1997 LS 650 Suzuki Savage - riding for 15 years plus on this! I need s temporary fix for the back turn signal stalk. See photo - Anything I can do? A hose clamp & electrical tape held it together for YEARS, but something happened and it is hanging. I can't remember what I did to keep the fixture together. I have some clamps that I could probably use but the problem is there is hardly anything for it to grab on to. I cut the rubber off the nub. It'll get fixed proper, but in the meantime - any ideas? Thanks so much. D |
Title: Re: Temporary Rear Turn Signal Stalk Fix Post by hammyo on 11/08/23 at 13:26:42 If only I could get something to grab on to this nub. I have all kinds of clamps. D |
Title: Re: Temporary Rear Turn Signal Stalk Fix Post by och on 11/12/23 at 09:20:12 Just get Harley knockoffs and bolt it in there. https://www.amazon.com/gp/product/B077N9CLFK |
Title: Re: Temporary Rear Turn Signal Stalk Fix Post by hammyo on 11/15/23 at 12:12:26 Thank you for the idea! I needed a quick fix while I waited for the part. Part came very quicly. The fix was not that easy. Who knew there was a hidden hex bolt on the inside of the chrome thing. While the break happened just because the original fix from 8 years ago finally gave out, the use of these wood pieces has stopped more breakage. Has stopped landscapers, neighbors, running kids, and me from hitting these tender lights. I don't have a garage so its in the parking lot. Thanks again for this site! D |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |