SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Re: 2007 S40 cam chain rivet size & source /cgi-bin/YaBB.pl?num=1695075381 Message started by verslagen1 on 09/18/23 at 20:39:13 |
Title: Re: 2007 S40 cam chain rivet size & source Post by verslagen1 on 09/18/23 at 20:39:13 the chain is continuous and not meant to be broken. |
Title: Re: 2007 S40 cam chain rivet size & source Post by justin_o_guy2 on 09/19/23 at 08:07:07 In a word..... Don't. If it decides to come from together you're gonna be hunting a motor. How many miles on it? |
Title: Re: 2007 S40 cam chain rivet size & source Post by justin_o_guy2 on 09/19/23 at 10:25:10 Unless it's been poorly lubricate, I don't see how it could be worn out. Even with nothing but short trips. I'd do the tensioner modification and ride it. Well, before I say that What are you seeing that worries you? |
Title: Re: 2007 S40 cam chain rivet size & source Post by justin_o_guy2 on 09/19/23 at 11:57:28 Trip length plays into that. The explanation is tedious. And the tensioner modification will get more out of the chain. Some people here have triple that and it's fine. |
Title: Re: 2007 S40 cam chain rivet size & source Post by Dave on 09/19/23 at 15:39:30 012029312A202B440 wrote:
Chain removal is done by taking out the chain tensioner and cam bolts, letting the sprocket drop down a bit, removing cam.......then you get enough play to take the sprocket out of the cam chain. You should get a Clymer manual and follow the instructions and photos. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |