SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Thread size on the engine long thru-bolts?
/cgi-bin/YaBB.pl?num=1691848445

Message started by och on 08/12/23 at 06:54:05

Title: Thread size on the engine long thru-bolts?
Post by och on 08/12/23 at 06:54:05

Anyone know the thread size on these bolts by any chance?

Title: Re: Thread size on the engine long thru-bolts?
Post by DragBikeMike on 08/12/23 at 09:27:31

If you are referring to the long bolts that secure the head cover on the right side (you reported one as "stripped'), they are M6 x 1.0 mm. Pitch is 1.0 mm. These bolts thread into blind holes, so they are not "thru-bolts".

If you are referring to some other bolt, then you will have to be more specific.

A thru-bolt utilizes a nut.

Title: Re: Thread size on the engine long thru-bolts?
Post by och on 08/12/23 at 11:19:55

Sorry, I meant the long bolts on the bottom that secure the footpegs and go through the entire engine. I figured it out, they are m10x1.25 - i am replacing the acorn nuts with class 10.9 flanged serrated nuts for more convenient removal of these bolts.