SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> DGK NEEDLE AND PWK 40mm
/cgi-bin/YaBB.pl?num=1654229892

Message started by Theduderino on 06/02/22 at 21:18:11

Title: DGK NEEDLE AND PWK 40mm
Post by Theduderino on 06/02/22 at 21:18:11

I mean this is for everybody but Mr. Mike especially. Haven’t been on in a while I’ve been enjoying my bike. I put the 40 mm PWK on it finally got the jetting right and couldn’t leave well enough alone. I bought the GGK needle. Well I installed it. With a 32 pilot and 142 Main. Now the SOB barely starts. I have never how do used to joke and now I do to get it to fire. But as soon as I push the choking in my fire a couple times and then kaput. But because I bought a knock off carburetor, mine was the one that had the removable needle jet. I have no idea what size the stock needle was as there is no markings. The DGK is significantly fatter

Title: Re: DGK NEEDLE AND PWK 40mm
Post by Theduderino on 06/02/22 at 21:19:31

Here she is

Title: Re: DGK NEEDLE AND PWK 40mm
Post by TheSneeze on 06/02/22 at 21:37:27

0539343524353423383F3E510 wrote:

I put the 40 mm PWK on it finally got the jetting right and couldn’t leave well enough alone

Well, put it back to when it was right?

Title: Re: DGK NEEDLE AND PWK 40mm
Post by Theduderino on 06/02/22 at 21:41:05

Sneeze, lol right no sh”@..
I just remember somebody saying something about the needle that the fake PWK came with was good, but the DGK was better. But mine had come with the removable needle jet. So I’m wondering, because I think yours had a fixed needle jet? I’ll just throw the stock needle back in, :-/